POWERNAIL 445LS Handleiding

POWERNAIL Compressor 445LS

Lees hieronder de 📖 handleiding in het Nederlandse voor POWERNAIL 445LS (16 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

Models 445 XLL, XLS, LL, LS

rev. 2019.04.09

Pneumatic Powernailer®

OPERATION AND MAINTENANCE MANUAL

MANUAL DE OPERACION Y DE MANTENIMIENTO

MANUEL D’INSTRUCTIONS ET D’ENTRETIEN

Read this manual before you use this Powernailer®. Follow all safety warnings and

instructions. If you are uncertain about the operation of the nailer, call us directly

at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help.

Please retain this information for future reference.

WARNING

The Powernailer® Model 445 Mallet Actuated Pneumatic Nailer is designed to bring Powernail quality

to a pneumatic Nailer. For those looking for ease of use in a pneumatic tool, the Powernailer Model

445 provides several distinct advantages. The Model 445 can nail 3/4” ﬂ ooring down to 1/2” tongue

and groove hardwood ﬂ ooring through the use of easy-to-change, no-mar adapter plates. The Model

445 is designed for use with 1-1/2”, 1-3/4” and 2” Powercleats

® nails.

INTRODUCTION

INDEX

LIMITED WARRANTY

POWERNAIL® Company, Inc. warrants to its customer, and to the ﬁ rst end-use purchaser of

POWERNAIL ﬂ ooring nailers purchased from an authorized POWERNAIL distributor, that

each serialized manufactured nailer by POWERNAIL®, for a period of 12 months from the

date of purchase, and with respect to the nailer body (speciﬁ cally Models 200, 445, and 50P),

for a period of 10 years from date of purchase, (“warranty period”); shall be free of defects in

materials and workmanship and will meet POWERNAIL’s speciﬁ cations in eﬀ ect at the time of

Product shipment. POWERNAIL will repair or replace, at its option, any Powernailer® that does

not conform to this warranty. Claims must be made no later than ﬁ fteen (15) days after the end

of the warranty period. POWERNAIL will perform all repair or replacements itself or through

its authorized contractors. POWERNAIL is not responsible for shipping, labor or other direct or

indirect costs. Damage caused by abuse, misuse, unusual or excessive wear is excluded. Repair

or modiﬁ cation of the Products by unauthorized parties will void this warranty. The customer

is responsible for returning Products to POWERNAIL for veriﬁ cation of nonconformance.

Warranties for Products not manufactured by POWERNAIL are limited to warranties provided

to POWERNAIL by the manufacturer of such product that are assignable to customer.

THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS, EXPRESS

OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

PURPOSE ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL POWERNAIL’S

LIABILITY FOR A WARRANTY CLAIM EXCEED THE PRICE PAID TO POWERNAIL

FOR THE NONCONFORMING PRODUCT, REGARDLESS OF THE FORM OR BASIS OF

THE CLAIM OR CAUSE OF ACTION.

Index..................................... 2

Warranty............................... 2

Safety Instructions................ 3

Powernail Company Info...... 3

Operating Instructions.......... 4-5

Parts & Service.................... 5-7

Drive Blade........................... 5

Seal Replacement................. 5-7

Parts List.............................. 8-9

Schematic (445 Nailers)........ 10

Seal Locations Diagram....... 11

Depth Chart.......................... 12

Troubleshooting Chart......... 13

Safety Labels........................ 14

Fasteners........................ 15

Accessory Products.............. 16

SAFETY INSTRUCTIONS

Always use approved and when operating this Nailer. The SAFETY GLASSES EAR PROTECTION

operator and others in the work area should always wear approved and eye protection FRONT SIDE

when operating this Nailer. Eye protection will help guard against ﬂ ying nails and debris, which could

cause severe eye injury.

EYE AND EAR PROTECTION should be used to prevent hearing damage when there are high noise

levels in the work area.

ALWAYS use ear plugs with a noise reduction rated at 29 db or highter at a construction site.

Nailer noise ratings are at LPA-1sd=90.6,

LWA-1sd=99.3 and LPA-1s,1m=86.3.

Nailer vibration rating: m/s2=3.05.

Always DISCONNECT THE AIR SUPPLY before making any adjustments, repairing, clearing jams or when the

Nailer is not in use. Do not use on scaﬀ olding or ladders and disconnect nailer from air supply when transporting

between installation areas.

Never attach the female end of a quick disconnect to the Nailer. This will trap air inside the Nailer and permit it to

be discharged. Only the unrestricted male connection should be attached to the Nailer.

Nailer requires an air source that can continuously deliver 80 to 110 psi at 3-1/2 cubic feet of air per minute for

operation.

Normal air pressure should not exceed 120 psi or damage to the Nailer and seals may occur. Excess air pressure

can cause the Nailer to explode.

To prevent ﬁ re or explosion, use only regulated compressed air—do not use bottled gases of any kind (no oxygen

or combustible gasses) to power this Nailer.

Nailer is intended for use installing wood ﬂ ooring and is not to be used for purposes not speciﬁ ed in the operations

manual.

Do not use any nails other than Powernail Powercleats Nails which are speciﬁ cally designed for use in any

Powernailer. Powercleats Nails are available in various lengths. Contact your Powernail Dealer for Powercleats

Nails.

Use only Powernail replacement parts in the repair or maintenance of this nailer. Parts or repair services are

available from the manufacturer or from agents authorised by the manufacturer. Repairs should be carried out

only by trained service personel in the ﬁ eld of fastener driving tools who will observe proper safety controls while

performing maintenace. Service personel should be qualiﬁ ed to to asses the safe working condition of fastener

driving tools.

Never place any part of the body in the discharge path of the Nailer when air is connected to the Nailer. Always

make sure Nailer is empty of cleats before connecting air hose so as to prevent any accidental discharge from

occurring.

Never leave the Nailer unattended while it is connected to an air supply.

Whenever air is connected to the Nailer, keep body parts away from the nail discharge path. Disconnect

the air line before making adjustments or repairs on the Nailer. Only connect air to an unloaded Nailer

so as to prevent accidental discharge.

POWERNAIL COMPANY, INC.

1300 Rose Road, Lake Zurich, IL 60047 US

Phone: 1-800-323-1653 OR 847-847-3000

www.powernail.com

Product specificaties

Merk:	POWERNAIL
Categorie:	Compressor
Model:	445LS

Heb je hulp nodig?

Als je hulp nodig hebt met POWERNAIL 445LS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Compressor POWERNAIL

POWERNAIL 1890U Handleiding

10 Juni 2023

POWERNAIL BR50 Handleiding

5 Juni 2023

POWERNAIL 445FS Handleiding

28 Mei 2023

POWERNAIL 1845F Handleiding

26 Mei 2023

POWERNAIL 445LS Handleiding

26 Mei 2023

POWERNAIL 50F Handleiding

21 Mei 2023

POWERNAIL 50P FLEX Handleiding

12 Mei 2023

Handleiding Compressor

Nieuwste handleidingen voor Compressor

Total TACLI2002 Handleiding

16 December 2024

Bavaria BAC 200/200F Handleiding

5 December 2024

Einhell YPL 206 Handleiding

4 December 2024

Einhell BT-AC 160/6 OF Handleiding

4 December 2024

Einhell TE-AC 400/100/10 D Handleiding

4 December 2024

Einhell TE-AC 300/50/10 Handleiding

4 December 2024

Einhell BT-AC 190/10 Handleiding

4 December 2024

Einhell BT-AC 140/24 OF Handleiding

4 December 2024

Einhell BT-AC 190/24 Handleiding

4 December 2024

Einhell EURO 4300 V Handleiding

4 December 2024