POWERNAIL 1890U Handleiding

POWERNAIL Compressor 1890U

Lees hieronder de 📖 handleiding in het Nederlandse voor POWERNAIL 1890U (12 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Model 1890U PowerStapler™

POWERNAIL

CO.

REV 15.08.07

WARNING

OPERATION AND MAINTENANCE MANUAL

MANUAL DE OPERACION Y DE MANTENIMIENTO

MANUEL D’INSTRUCTIONS ET D’ENTRETIEN

Read this manual before you use this Powernailer®. Follow all safety warnings and

instructions. If you are uncertain about the operation of the nailer, call us directly

at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help.

Please retain this information for future reference.

The 1890U PowerStapler® is a trigger-pull stapler designed to bring Powernail

quality and ﬂ ooring expertise to a pneumatic stapler. The 1890U is designed for

use with 1/4” crown, 18 GA staples from 7/8” to 1-1/2” in length.

INTRODUCTION

INDEX

LIMITED WARRANTY

POWERNAIL® Company, Inc. warrants to its customer, and to the ﬁ rst end-use purchaser

of POWERNAIL 1890U PowerStapler purchased from an authorized POWERNAIL

distributor, that each serialized manufactured 1890U PowerStapler by POWERNAIL®,

for a period of 12 months from the date of purchase; shall be free of defects in materials and

workmanship and will meet POWERNAIL’S speciﬁ cations in eect at the time of product

shipment. POWERNAIL will repair or replace, at its option, any 1890U PowerStapler that

does not conform to this warranty. Claims must be made no later than ﬁ fteen (15) days after

the end of the warranty period. POWERNAIL will perform all repair or replacements itself

or through its authorized contractors. POWERNAIL is not responsible for shipping, labor

or other direct or indirect costs. Damage caused by abuse, misuse, unusual or excessive

wear is excluded. Repair or modiﬁ cation of the Products by unauthorized parties will

void this warranty. The customer is responsible for returning Products to POWERNAIL

for veriﬁ cation of nonconformance. Warranties for Products not manufactured by

POWERNAIL are limited to warranties provided to POWERNAIL by the manufacturer of

such product that are assignable to customer.

THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS,

EXPRESS OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR PURPOSE ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL

POWERNAIL’S LIABILITY FOR A WARRANTY CLAIM EXCEED THE PRICE PAID

TO POWERNAIL FOR THE NONCONFORMING PRODUCT, REGARDLESS OF THE

FORM OR BASIS OF THE CLAIM OR CAUSE OF ACTION.

Index..................................... 2

Warranty............................... 2

Safety Instructions................ 3

Operating the tool............... 4-6

Air Supply............................. 5

Loading fasteners................. 6

Clearing a jam............................ 7

Safety Labels...................... 7

Troubleshooting Chart.......... 9

Parts List........................ 10

Schematic........................ 11

Phone Support..................... 12

Web Site.............................. 12

Powernail Company Info..... 12

SAFETY INSTRUCTIONS

When operating this Nailer, the operator and others in the work area should ALWAYS wear approved

SAFETY GLASSES, with front and side eye protection. Eye protection will help guard against ﬂ ying

nails and debris, which could cause severe eye injury.

EAR PROTECTION should be used to prevent hearing damage when there are high noise levels

in the work area. ALWAYS use ear plugs with a noise reduction rated at 29 db or higher at a

construction site.

Noise characteristic values in accordance with ENxx1:

A-weighted single-event sound pressure level at operator’s position: LPA, ls94dBA

A-weighted single sound pressure level:LpA,ls,lm89dBA

Vibration characteristic values in accordance with ISO 8662, PART II

Weighted root mean square acceleration 3.2m/s²

Always DISCONNECT THE AIR SUPPLY before making any adjustments, repairing, clearing jams or when

the Nailer is not in use. Do not use on scaolding or ladders and disconnect nailer from air supply when

transporting

between installation areas.

Never attach the female end of a quick disconnect to the Nailer. This will trap air inside the Nailer and permit it

to be discharged. Only the unrestricted male connection should be attached to the Nailer.

Nailer requires an air source that can continuously deliver 70 to 100 psi at 3-1/2 cubic feet of air per minute

for operation.

Normal air pressure should not exceed 100 psi or damage to the Nailer and seals may occur. Excess air

pressure can cause the Nailer to explode.

To prevent ﬁ re or explosion, use only regulated compressed air—do not use bottled gases of any kind (no

oxygen or combustible gasses) to power this Nailer.

Nailer is intended for use installing wood ﬂ ooring and is not to be used for purposes not speciﬁ ed in the

operations manual.

Do not use any nails other than Powernail® Powercleats which are 20 gage L-cleat nails speciﬁ cally designed

for use in any 20 gage Powernailer. Powercleat nails are available in lengths of 1” and 1-1/4”. Contact your

Powernail Dealer for the correct Powercleats for the Model 2000.

Use only Powernail replacement parts in the repair or maintenance of this nailer. Parts or repair services are

available from the manufacturer or from agents authorized by the manufacturer. Repairs should be carried out

only by trained service personel in the ﬁ eld of fastener driving tools who will observe proper safety controls

while performing maintenance. Service personel should be qualiﬁ ed to assess the safe working condition of

fastener driving tools.

Always make sure Nailer is empty of nails before connecting air hose, so as to prevent any accidental

discharge from occurring. ONLY CONNECT AIR TO AN UNLOADED NAILER.

Do not depress the trigger when loading. If the fasteners are jammed, disconnect the tool from the air supply

before you remove the jammed nails.

Never place any part of the body in the discharge path of the Nailer when air is connected to the

Nailer. Never point the tool at yourself or others, even if the tool is not loaded. For safety, keep out

of reach of children. Never leave the Nailer unattended while it is connected to an air supply.

Do not ﬁ re into hard materials or attempt to use on hard or brittle material such as concrete, steel

or tile. Before using this tool, carefully check that all parts are working correctly. Do not use the tool if it is not

operating correctly, check for causes and adjust as necessary for proper operation. When not in use, the tool

should be cleaned, fully assembled and then stored in a dry location. This will extend the life of the tool and

reduce any oxidation.

Product specificaties

Merk:	POWERNAIL
Categorie:	Compressor
Model:	1890U

Heb je hulp nodig?

Als je hulp nodig hebt met POWERNAIL 1890U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Compressor POWERNAIL

POWERNAIL 1890U Handleiding

10 Juni 2023

POWERNAIL BR50 Handleiding

5 Juni 2023

POWERNAIL 445FS Handleiding

28 Mei 2023

POWERNAIL 1845F Handleiding

26 Mei 2023

POWERNAIL 445LS Handleiding

26 Mei 2023

POWERNAIL 50F Handleiding

21 Mei 2023

POWERNAIL 50P FLEX Handleiding

12 Mei 2023

Handleiding Compressor

Nieuwste handleidingen voor Compressor

Total TACLI2002 Handleiding

16 December 2024

Bavaria BAC 200/200F Handleiding

5 December 2024

Einhell YPL 206 Handleiding

4 December 2024

Einhell BT-AC 160/6 OF Handleiding

4 December 2024

Einhell TE-AC 400/100/10 D Handleiding

4 December 2024

Einhell TE-AC 300/50/10 Handleiding

4 December 2024

Einhell BT-AC 190/10 Handleiding

4 December 2024

Einhell BT-AC 140/24 OF Handleiding

4 December 2024

Einhell BT-AC 190/24 Handleiding

4 December 2024

Einhell EURO 4300 V Handleiding

4 December 2024