PowerBox Systems Source Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor PowerBox Systems Source (10 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Instruction Manual
PowErBox
SourcE
2PowerBox-Systems โˆ’ World Leaders in RC Power Supply Systems
Dear customer,
we are delighted that you have decided to purchase the PowerBox Source
power supply from our range. We hope you have many hours of pleasure and
great success with your PowerBox Source.
The PowerBox Source is a logical development of the successful BaseLog,
taking due account of requests from customers and modern telemetry sys-
tem requirements. We have managed to reduce the backerโ€™s size by optimi-
sing the heat-sink design, and as a result the PowerBox Source is now also
suitable for small models with high power requirements. This small energy
package offers enormous performance reserves, and compares very well
even with larger battery backer systems.
The unit can be connected to an optional small O-LED screen which provides
a display of all battery data even when the backer itself is inaccessible in
the model. However, the full capability of the can still be PowerBox Source
exploited even without the screen: the socket enables the user to access Data
all settings either using a smartphone and a , or a laptop or BlueCom Adapter
PC using our .USB interface
CORE pilots, in particular, can control all aspects of the PowerBox Source
from the transmitter without any extra accessories.
Re๎†ฅecting the current state of technology, all battery-relevant data can now
be transferred to the transmitter via the telemetry system. The PowerBox
Source can transfer telemetry data to Jeti, Graupner, Multiplex and Futaba
transmitters as well as the telemetry system. An additional teleconverCORE -
ter is not required for Futaba.
The PowerBox Source can be set to any of four different output voltages:
5.9 V โ€“ 7.4 V โ€“ 7.8 V and unregulated; in the latter case the battery voltage is
passed through with minimal loss. The MPX inputs and outputs are ๎†คtted with
retaining clips / lugs to prevent the connectors slipping out when subjected
to severe vibration.
www.powerbox-systems.com 3
FEATURES:
๎€ŸHigh performance
๎€ŸOptimised cooling
๎€ŸSmall size
๎€ŸOptional OLED screen, 128 x 64 pixels
๎€ŸFour different output voltages
๎€ŸSuitable for use with all battery types
๎€ŸCan be controlled by the switch or BlueCom or USB interface
๎€ŸSupports ๎†คve different telemetry systems: CORE PยฒBUS, Jeti EX-Bus,
Futaba S.BUS2, Multiplex M-Link, Graupner Hott
๎€ŸRedundant regulator design
๎€ŸSuppression of servo feedback currents
๎€ŸProtection against electro-static discharge
๎€ŸIntegral regulator monitoring
๎€ŸCan be updated using the USB Interface or BlueCom Adapter
CONNECTIONS, CONTROLS
Telemetrie socket USB/BlueCom socket
Regulated output
to receiver
Switch socket
Battery inputs
Display socket


Product specificaties

Merk: PowerBox Systems
Categorie: Radiografisch bestuurbaar speelgoed
Model: Source
Kleur van het product: Zwart
Soort: Radio-Controlled (RC) Model Parts
Correct gebruik: Vliegtuig
Spanning: 4 - 9 V
Compatibiliteit: CORE PยฒBUS, Jeti EX-Bus, Futaba S.BUS2, Multiplex M-Link, Graupner Hott
Type product: Voeding
Werkingsstroom (@4,8 V): 85 mA

Heb je hulp nodig?

Als je hulp nodig hebt met PowerBox Systems Source stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radiografisch bestuurbaar speelgoed PowerBox Systems

Handleiding Radiografisch bestuurbaar speelgoed

Nieuwste handleidingen voor Radiografisch bestuurbaar speelgoed