PowerBox Systems iGyro 3xtra Handleiding

PowerBox Systems Radiografisch bestuurbaar speelgoed iGyro 3xtra

Lees hieronder de 📖 handleiding in het Nederlandse voor PowerBox Systems iGyro 3xtra (12 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Instruction Manual

2PowerBox-Systems − World Leaders in RC Power Supply Systems

1. PRODUCT DESCRIPTION

The iGyro 3xtra ushers in the second generation of the iGyro family. The new boasts a iGyro 3xtra

completely revised set-up procedure and regulatory algorithm, expanded features and enormously

enhanced performance, making it the new “State of the Art”.

In contrast to its predecessor - the 3e - the new no longer incorporates delta and V-tail mixers. iGyro

Instead the has a new, simple learning process enabling it to detect all servo mixer combiiGyro -

nations, which can even include differential and unequal travels. The user simply sets up delta

control surfaces, V-tails, aperons and tailerons at the transmitter in the usual way. A sophisticated

three-dimensional algorithm then divides up the control commands again into aileron, elevator and

rudder for all ve inputs individually. This method ensures accurate suppression of the individual

axes when control commands are given, or when the heading function is in use.

Another signicant innovation is the learning process for the installed position of the gyro: this

simply involves movements of the model itself. At the same time the procedure also denes the di-

rections of effect in the iGyro. In the past many pilots have been unsure whether they have actually

set the direction of effect correctly, but this doubt is now eliminated.

If you are at the ying eld and don’t have a smartphone with BlueCom Adapter or a laptop with

USB Interface Adapter to hand, you can very easily adjust the gyro’s gain for each axis individually

and accurately using the transmitter sticks - without any additional equipment at all!

The hardware has also been subtly improved: the unit now features comprehensive ESD protection

to provide a complete shield against static charge problems in the model.

Supplementary features such as gyro characteristics, stick priority and lock-in feel also give experts

the means to customise the iGyro 3xtra to their exact personal requirements.

www.powerbox-systems.com 3

2. INSTALLATION, CONNECTIONS

The iGyro 3xtra can be installed in any position in the model - provided that it is parallel to or at

right-angles (90°) to the direction of ight. The result of installing it at an angle would be mixed

corrective effect. For example: a gust affecting the aileron axis might cause the gyro to correct the

elevator and rudder at the same time.

Mount the on a clean, smooth surface, then connect it to the receiver using the patch leads iGyro

supplied. The iGyro has two aileron inputs, two elevator inputs and one rudder input.

The Gain input is absolutely essential if the is to function correctly, and you need to set up a iGyro

rotary control or slider (up to +/- 200%) at the transmitter for this. Once you have established the

correct settings during a set-up ight, the percentage values for this transmitter control can be

programmed permanently onto a switch, enabling you to activate or disable the , or select a iGyro

second mode.

The following wiring diagrams should be observed if you are using a delta / V-tail model; note that

it is also possible to control model deltas with four control surfaces:

Delta A: connect the two pairs of control surfaces to and Aile-A Elev-A

Delta B: connect the two pairs of control surfaces to and Aile-B Elev-B

V-tail: connect the two pairs of control surfaces to Elev-B Rudder and

Delta – vector models: Delta A as described above; Elev-B can be used for the vector.

The mixing arrangements for the delta and V-tail functions are set at the transmitter in the normal

way. You don’t need to worry about differential or unequal travels, as the 3D algorithm detects this,

and ensures that the axis inputs are separated again without error.

Product specificaties

Merk:	PowerBox Systems
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	iGyro 3xtra
Kleur van het product:	Grijs
Soort:	Radio-Controlled (RC) Model Parts
Materiaal behuizing:	Aluminium
Correct gebruik:	Vliegtuig
Spanning:	4 - 9 V
Type product:	Gyrosysteem
Stroom (max.):	20 A