PowerBox Systems Mercury SRS Handleiding

PowerBox Systems Radiografisch bestuurbaar speelgoed Mercury SRS

Lees hieronder de 📖 handleiding in het Nederlandse voor PowerBox Systems Mercury SRS (36 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

Instruction Manual

mErcury SrS

2PowerBox-Systems − World Leaders in RC Power Supply Systems

Dear customer,

We are delighted that you have decided to purchase the PowerBox Mercury SRS

power supply from our range.

We hope you have many hours of pleasure and great success with your PowerBox

Mercury SRS.

Product description

The PowerBox Mercury SRS is a new power management system which combines

all the experience and ﬁndings we have gained over the last few years, together with

customer requests, in a single compact unit. Never before has so much functionality

been crammed into such a small space! The is ideal for any applicaMercury SRS -

tion requiring an airborne system which provides an uncompromising level of high

performance. Integral , dual battery, dual receiving system, telemetry, door seiGyro -

quencer and servo matching are just a few of the highlights which this small, light-

weight device provides.

Introduction

These instructions explain how to install the Mercury SRS in the model and set it up

with the help of the Assistants. Working through the individual steps in the Assistants

completes most of the programming for the model; all that remains is to set up the

auxiliary functions and ﬁne-tune the servos using the servo-match function. Natu-

rally it is also possible to set up all the functions of the manually, i.e. Mercury SRS

without using the Setup Assistant. All the menu points are explained individually in

the latter part of these instructions.

1. USING THE UNIT FOR THE FIRST TIME

Any pilot who has experience using a will immediately feel ‘at home’ with PowerBox

the method of operating the . The device is operated in the usual way Mercury SRS

with the help of a menu system displayed on the OLED screen, and the ON / OFF

switch.

www.powerbox-systems.com 3

1.1. Installing the Mercury SRS in the model

The Mercury SRS must be screwed to a hard surface in the model, otherwise it is

possible that the integral will not work properly. If the mounting plate is large, iGyro

it must be stiffened by the addition of cross-struts. Please note that the Mercury

SRS must always be installed in the model at right-angles to the fuselage centreline.

The actual orientation of the is unimportant: it can be installed in any Mercury SRS

location which is at 90° to the direction of ﬂight. The actual installed position is auto-

matically detected later when the Assistant is invoked.

The switch is mounted on the fuselage side. As is usual, the inside of the switch

opening should be stiffened by adding a hardwood doubler to prevent serious vibra-

tion from reaching the switch; this is particularly important if the fuselage is made

of GRP. In the case of scale models it is often undesirable to have an exposed switch

on the outside, and for such applications we offer the or the MagSensor Magic Jeti

Switch (only Jeti TX) as alternative methods of switching. Please note, however: the

SensorSwitch is essential for programming the unit, and should always be acces-

sible.

The OLED screen can be installed in any location where it is clearly visible. If the stan-

dard cable (50 cm) is not long enough, we can supply extension leads.

1.2. Connections

The ﬁrst step in operating the is to connect two batteries to it; the two PowerBox

packs should be of the same type and capacity. Connect the switch, the screen, both

receivers (Spektrum system: four satellites) and the optional sensor using GPS II

the patch-leads supplied in the set. The batteries can be either 2S LiPo, 2S LiIon, 2S

LiFePo or 5S NiMH types. We recommend the use of PowerBox Batteries, which

include integral electronic charge circuitry. If you intend to make up your own battery

packs, please note that correct polarity is vital, as the unit does not include reverse

polarity protection in order to avoid power losses.

Connecting a battery with reversed polarity - no matter how brieﬂy - will instant-

ly destroy the voltage regulators in the PowerBox.

Product specificaties

Merk:	PowerBox Systems
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	Mercury SRS
Kleur van het product:	Zwart
Soort:	Radio-Controlled (RC) Model Parts
Correct gebruik:	Vliegtuig
Merkcompatibiliteit:	Alle merken
Spanning:	4 - 9 V
Compatibiliteit:	Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Type product:	Voeding