PowerBox Systems PBR-12X Handleiding

PowerBox Systems Radiografisch bestuurbaar speelgoed PBR-12X

Lees hieronder de 📖 handleiding in het Nederlandse voor PowerBox Systems PBR-12X (12 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Instruction Manual

2PowerBox-Systems − World Leaders in RC Power Supply Systems

Dear PowerBox Customer,

Congratulations on your decision to install a PowerBox in your model. PBR-12X

This unit represents the most compact power supply system available anywhere

at present.

The -PBR-12X offers full telemetry capability in addition to its role as high-perfor

mance power supply system with electronic switch.

We are condent that you will have great pleasure and success with your PBR-12X!

1.Installation, connections

In order to minimise the unit’s dimensions, the case does not feature mounting

lugs; instead the is installed using the self-adhesive pad supplied in the PBR-12X

set. Since the unit is so light and compact, this represents an excellent method of

mounting.

The PBR-12X can be used with any of four radio control systems: PowerBox

CORE/ATOM P²BUS, Jeti EX-BUS, Spektrum SRXL2 and Futaba S.BUS2. All four

systems share a particular characteristic: servo-signals and telemetry data are

carried on a single bus cable. This eliminates the need for a second patch lead for

telemetry data, as is still required for other systems.

The PBR-12X automatically detects the system to which it is connected; it may

take a few seconds for the system to be recognised unambiguously the rst time

it is plugged in. However, once detected, the type is saved, and the system starts

without delay next time it is switched on.

This means that the system is Plug‘n Play, unless you wish to adjust the fail-safe

www.powerbox-systems.com 3

positions, the frame rate or the capacity reset channel.

CORE- and Jeti-users have the facility to carry out all adjustments from the trans-

mitter. Alternatively a USB-adapter can be used; this is a requirement for Futaba

and Spektrum pilots. With this arrangement everything can be set up using the

associated Terminal-App.

Connecting the battery

It is essential to maintain correct polarity. Use the adapter lead; if you wish to use

a connector other than the MPX connector, note that red = positive and black =

negative.

Connecting the switch

Plug the switch into the appropriate socket. The can be supplied either PBR-12X

with a button switch or the MicroMag magnet switch.

The button switch operates in the same way as with all PowerBox systems: hold

the button pressed in until the LED starts ashing at a high rate. Release the button

briey, then press it again briey: the LED now glows a constant green to indicate

that it is switched on. Repeat the procedure to switch off.

If you have a MicroMag switch, hold the magnet over the switch until the, PBR-12X

switches on. The LED turns blue as soon as the switch registers a magnet. When

the switching process is complete, the LED turns red. The LED then glows green to

indicate that it is switched on.

Connecting the USB interface adapter

If required, the USB interface adapter should be plugged into the input socket mar-

ked RX2. The RX2 input can only be activated for Terminal when it is switched on.

If you have already connected a receiver to RX2, you must restart the PBR-12X

without a receiver at RX2 in order to activate the Terminal function.

Product specificaties

Merk:	PowerBox Systems
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	PBR-12X
Gewicht:	15 g
Breedte:	22 mm
Diepte:	23 mm
Hoogte:	42 mm
Materiaal behuizing:	Aluminium
Correct gebruik:	Universeel
Aantal per verpakking:	1 stuk(s)
Merkcompatibiliteit:	PowerBox Systems
Compatibiliteit:	PowerBox P²BUS, Jeti Ex-BUS, Spektrum and Futaba S.BUS2
Aantal kanalen:	12 kanalen
Bedrijfstemperatuur (T-T):	-30 - 85 °C
Type product:	Expander
Bedrijfsspanning (min):	4 V
Bedrijfsspanning (max):	9 V
Aantal servo's:	12