Cotech AR0025 Handleiding

Cotech Verlichting AR0025

Lees hieronder de 📖 handleiding in het Nederlandse voor Cotech AR0025 (28 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
fÜrsäkra dig om att du har fÜrstütt den
innan du använder utrustningen. Spara
bruksanvisningen fĂśr framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg om
at du forstür dem, før du tar produktet i bruk.
Ta vare pĂĽ anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myÜhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
ENGLISHSVENSKANOR SKSUOMIDEUTSCH
Väggbelysning LED med rÜrelsevakt
Veggbelysning LED med bevegelsessensor
LED-seinävalaisin, jossa liiketunnistin
LED-Wandleuchte mit Bewegungsmelder
Art.no Model
36-4856 AR0025-BLACK
Motion Sensor
LED Wall Light
Ver. 20131204
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttÜohje
Original Bedienungsanleitung
2
ENGLISH
A B
Motion Sensor LED Wall Light
Art.no 36-4856 Model AR0025-black
Please read the entire instruction manual before using the product and save it for future
reference. We reserve the right for any errors in text or images and any necessary
changes made to technical data. If you have any questions regarding technical
problems please contact our Customer Services.
1. Product description
• The wall-mounted floodlight is combined with an infra-red (PIR) detector that
scans a settable detection zone. When the detector senses movement inside
the detection zone the light automatically comes on. This makes it suitable for
stairs, carports, and backyards, for your convenience and security. The light stays
on for as long as it detects movement inside the set detection zone.
• IP44 (approved for outdoor use)
• Wall light with 14 bright LEDs (6,500 K), 770 lm
• Detection zone of up to 8 m at an angle of up to 140°
• Settable lighting time (from 10 seconds up to 4 minutes)
• Aperture: 210×130 mm
• 20 W, 230 V
2. Location
Consider the following advice:
• The best height to mount the light is 1.8–2.5 m above the detection zone.
• Do not point the sensor at the sun.
• To avoid the light coming on unnecessarily, do not aim the motion sensor towards
heat sources such as BBQ’s, AC units, other outdoor lighting, car headlights or
sources of electromagnetic interference such as transformers.
• Do not aim the motion sensor at reflective surfaces such as white walls or
swimming pools.
• The motion sensor’s detection zone (max 8 m at 140˚) can vary depending on how
high and where it is positioned.
• Changes in temperature can
affect the range of the motion
sensor.
• Before positioning the floodlight, bear in
mind that movement across the detection
zone (A) will be detected before motion
towards or away from the sensor (B).
3
ENGLISH
1
8
3
4
5
5
6
7
2
3. Installation
1. Lamp housing
2. Strain relief
3. Terminal block
4. Wall mounting screws
5. Wall mount release catch
6. Wall mount
7. Rubber grommet
8. Locking screw
Important: Read the entire instruction manual before installation. The installation
should be carried out by a qualied electrician and conform to current regulations.
Warning: Make sure that the power is turned off and that the fuse is removed before
beginning any installation, change of light bulb or service.
1. Undo the locking screw.
2. Depress the release catch with a
screwdriver or similar, grasp the ring
and pull out the wall mount.
3. Mark out the position of the mounting
holes on the wall using the wall mount
as a template. Drill holes for the mounting
screws. Use suitable screws and wall
plugs if necessary. The floodlight must
be xed securely.
Note: Mount the light horizontally.
4. Undo the cable strain relief, pass
the power cable (3G, 0.75) through
the rubber grommet. Connect
the three wires: L - Live (brown),
N - Neutral (blue) and - Electrical
earth (green/yellow) to the terminal
block as marked in the junction box.

Product specificaties

Merk: Cotech
Categorie: Verlichting
Model: AR0025

Heb je hulp nodig?

Als je hulp nodig hebt met Cotech AR0025 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Cotech

Cotech

Cotech EMP701MD Handleiding

21 November 2023
Cotech

Cotech IPC30SA1A Handleiding

20 Juni 2023
Cotech

Cotech JF4011G Handleiding

13 Juni 2023
Cotech

Cotech RP120W Handleiding

31 Mei 2023
Cotech

Cotech 36-4137 Handleiding

23 Mei 2023
Cotech

Cotech LY9601H Handleiding

22 Mei 2023
Cotech

Cotech ECLC-HALO-0103D Handleiding

9 Mei 2023
Cotech

Cotech WCVC012W10 Handleiding

7 Mei 2023
Cotech

Cotech TOE-12 Handleiding

5 Mei 2023
Cotech

Cotech 36-6078 Handleiding

4 Mei 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

LumenRadio

LumenRadio CRMX Galileo MAX Handleiding

21 December 2024
Showtec

Showtec Performer Fresnel 2200 DDT Handleiding

21 December 2024
Showtec

Showtec AirDrive 2.4 IP Handleiding

21 December 2024
Bosch

Bosch FSN 1400 Set Professional Handleiding

21 December 2024
Neewer

Neewer VL66C Handleiding

18 December 2024
American DJ

American DJ ENCORE LB15IP Handleiding

18 December 2024
American DJ

American DJ ENCORE LP12IP Handleiding

18 December 2024
Wiesenfield

Wiesenfield UNI-LP-100 Handleiding

17 December 2024
Cateye

Cateye Wearable mini SL-WA10 Handleiding

16 December 2024
Cateye

Cateye Volt50 HL-EL460RC-REAR Handleiding

16 December 2024