Cotech ECLC-HALO-0103D Handleiding

Cotech Verlichting ECLC-HALO-0103D

Lees hieronder de 📖 handleiding in het Nederlandse voor Cotech ECLC-HALO-0103D (12 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg om
at du forstår dem, før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
ENGLISHSVENSKANOR SKSUOMIDEUTSCH
Ver. 20131028
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no. Model
18-2158 ECLC-HALO-0103D-UK
36-3812 ECLC-HALO-0103D
Halogenbelysning
Halogenbelysning
Halogeenivalaisin
Halogenbeleuchtung
Halogen
Flood Light
2
ENGLISH
Halogen Flood Light
Art.no. 18-2158 Model ECLC-HALO-0103D-UK
36-3812 ECLC-HALO-0103D
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse).
Safety
• Please read the entire instruction carefully to ensure safe usage of this product.
• Ensure that the cable has not been damaged before use.
• Never place the cable against, or directly in front of the light source.
• Do not place the light angled directly toward a wall socket.
• Never cover the light in any way.
• Never leave children unattended with this product.
• Distance to nearest object in front of the light must be a minimum of 1 m.
• Always unplug the unit when the light is not used.
• Before changing tube light, unplug the unit.
• The light becomes very hot. Let it cool down before changing tube light.
• Never use the light in areas where explosive gases or liquids are stored.
• If the protective glass, the rubber gasket or the cord is damaged, never use
the unit before the damaged part is replaced.
• If the external flexible cable of this luminary is damaged, it shall be replaced by
a special cord or cord exclusively available from the manufacturer/his service agent.
• Never use the light with a timer or other equipment, which can turn on
the light automatically.
3
ENGLISH
Mounting
1. Before mounting check that no parts have been damaged during transport.
2. Unscrew the lock for the armature housing and open the spotlight. Put in the light
source (120 W, R7s, 78 mm) and screw it closed.
3. Mount the stand onto the halogen spotlight.
4. Place the stand on a stable foundation where it cannot tip. Then adjust the angle
of the spotlight.
5. Connect the plug to the wall socket.
Specifications
Article 18-2158 / 36-3812
Type No. ECLC-HALO-0103D
Voltage 220–240 V AC, 50 Hz
Light source Max 1 × 120 W, R7s, 78 mm
Cord 1.5 m rubber cable H05RN-F 3 × 1.0 mm
2
IP class IP44 for indoor and outdoor


Product specificaties

Merk: Cotech
Categorie: Verlichting
Model: ECLC-HALO-0103D

Heb je hulp nodig?

Als je hulp nodig hebt met Cotech ECLC-HALO-0103D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Cotech

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting