Ikan MB8 Handleiding

Ikan Verlichting MB8

Lees hieronder de 📖 handleiding in het Nederlandse voor Ikan MB8 (6 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

QUIC TAR U EKS T G ID

MW8

Mylo Daylight Half x 1 LED Light

MB8

Mylo Bi-Color Half x 1 LED Light

CHECKED BY

What’s Included

1 x Light Fixture

1 x Yoke Mount

1 x Neutral Density Filter

1 x Power Supply w/ Cable

1 x Power Supply for Dual Charger

1 x DV Dual Battery Charger

2 x DV Battery

Getting to know your MYLO lights

PRECAUTIONS:

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use only the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting service department the

at ikancorp.com.

• Keep the unit clean and free of dust. The unit can be cleaned with a soft dry cloth.

• Use only parts provided by the manufacturer.

• Always use caution when plugging in the ﬁxture.

Mounting the Mylo to a Stand:

The Mylo LED Light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily

sit and adjust on any stand. The yoke allows the light to move freely, without obstruction. The Baby

5/8" and Junior 1-

1/8" Combo Pin give the user a wide range of stands. The light can be mounted either

horizontally or vertically on a 5/8" baby pin.

Power the LEDs:

The Mylo light comes with an included AC power supply and 6 foot cable. This allows the user to plug

into any standard 120-240v electrical outlet. The Mylo LED light can be powered from one of two Sony

“L” Style DV batteries that are supplied with the unit.

Adjusting the Color & Brightness of the Light:

The Mylo LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was

designed with the idea that it could be reached and adjusted when the light is up on a stand. The knob

has two push settings.

1. The default setting is the brightness from 10%-100% brightness.

2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)

Optional Accessories

Some other products that work well with the include:Mylo lights

HD-STND

ROLLR-STND10

CP-STND-V3

SW-04

KCP-703

Heavy Duty Light Stand

2 Stage Roller Stand 10 ft 6 in

Compact Light Stand Version 3

Safety Wire

Stage Clamp w/ 16mm Stud

Mylo Battery Operation

You can charge your Sony style NP-F970 6600mah DV batteries at the same time.

Connect the power cable to the AC Charger and plug it into the wall.

1.) Place one or both battery packs onto the charger and slide it towards the indicator lights.

2.) The indicator lights will illuminate with how much charge is left on the battery.

3.) The charger will begin charging when the battery is fully inserted into the charger.

(Note: The battery is fully charged when all lights are a solid red).

Attaching the battery pack to the back of the Mylo light ﬁxture can be done by placing the

battery against the back of the Mylo battery port and sliding it forward.

Properly store the NP-F970 battery when not in use. If the NP-F970 battery will not be used for

a while, run down the battery and store it with Mylo light ﬁxture.

Charging Times

Normal Charge Time Fully Charge Time

NP-F970 ~375 min ~450 min

Be sure to charge the battery pack before you start using your Mylo light.

We recommend charging the battery pack in an ambient temperature of between 10˚C~30˚C (50 F~86˚ ˚F)

until the charge lamps are all fully lit. If you charge the battery pack outside of this temperature

range, you may not be able to charge it efﬁciently. Battery pack performance decreases when

the ambient temperature is 10˚C or below, and the length of time you can use the battery (50˚F)

pack becomes shorter. In that case, do the following to use the battery pack for a longer time.

Put the battery pack in a pocket to warm it up, & insert your Mylo light right before you turn it on.

About Battery Life

Battery capacity decreases over time and through repeated use. If you notice problems with the

battery keeping charge, it is probably time to replace it with a new one. Each battery’s life is

governed by storage, operating and enviromental conditions

Product specificaties

Merk:	Ikan
Categorie:	Verlichting
Model:	MB8
Kleur van het product:	Zwart
Materiaal behuizing:	Metaal
Type stroombron:	AC
Vorm:	Rechthoekig
Aantal per verpakking:	1 stuk(s)
Color Rendering Index (CRI):	95
Stralingshoek:	50 °
Aantal leds:	800
Kleurtemperatuur (max):	5600 K
Kleurtemperatuur (min):	3200 K