Bobrick B-165 2436 Handleiding

Bobrick Niet gecategoriseerd B-165 2436

Lees hieronder de 📖 handleiding in het Nederlandse voor Bobrick B-165 2436 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 4/19/21
R/B Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
Technical Data
continued . . .
MIRROR WITH
STAINLESS STEEL
CHANNEL FRAME
Designer's Notes:
1. Special-order sizes available on request.
2. Maximum size mirror available, 96" x 72'' (244 x 183cm); minimum size, 12" x 12" (30 x 30cm).
3. All Bobrick framed mirrors are manufactured to overall width and height dimensions. EXAMPLE: A 24" x 36''
(61 x 91cm) mirror will be furnished 24'' x 36'' (61 x 91cm) outside-of-frame to outside-of-frame.
4. To specify special sizes use Series Number followed by width x height in inches. EXAMPLE: B-165 2024 20" x
24" (51 x. 61cm)
5. Bobrick framed mirrors are manufactured to a tolerance 1/8'' (3.2mm).
6. For su󰀩cient space to lift mirror onto wall hanger(s), provide 1" (25mm) minimum clearance above top of
mirror frame.
7. Provide 1/2'' (12.7mm) minimum clearance on each side.
B-165
SERIES
Note: Mirrors greater than 36" in width will have multiple
hanger brackets with a typical 8" o󰀨 each edge.
Snap Locking Design
(Rear View)
"2S" Tab Design
(Rear View)
- for all other mirrors up to a width of 36"
Figure: 1 Figure: 2
3/4''
19mm 2-1/2''
65mmS
2-9/16''
65mm
S
4'' or 5" Typ.
100 or 125mmS
Side View
Back Plate/Wall Hanger
Frame
Mirror
Finish Face of Wall
Frame
Mirror
S
S S
1" to 1-1/2"
25mm to 40mm
S
(Does not engage with lower Louvers)
Half
Mirror Width
4"
100mm Typ.
Mirror
Bracket
w/Tape
2-7/8"
75mm
Mirror
Bracket
1/2"
13mm
Finish Face
of Wall
B-165 1824 18'' (46cm) 24'' (61cm)
B-165 1830 18'' (46cm) 30'' (76cm)
B-165 1836 18'' (46cm) 36'' (91cm)
B-165 2430 24" (61cm) 30" (76cm)
B-165 2436 24'' (61cm) 36'' (91cm)
B-165 2448 24'' (61cm) 48'' (122cm)
B-165 2460 24'' (61cm) 60'' (152cm)
STANDARD B-165 SERIES MIRRORS
HW
MODEL
NO.
OVERALL SIZE
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-165 Rev. 4/19/21
R/B Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
MATERIALS:
Frame — Type-430 stainless steel, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm) channel with 1/4" (6mm) return at rear for Snap Locking
Design; 1/2" x 1/2" x 1/2" (13 x 13 x 13mm) channel for Lock Tab Design, with bright polished finish. One piece frame with 90 degree
mitered corners. Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bot-
tom to prevent the bottom of the mirror from pulling away from the wall.
Mirror — No. 1 quality, 1/4" (6mm) select float glass: selected for silvering, electrolytically copper-plated by the galvanic process, and
guaranteed for 15 years against silver spoilage. Back is protected by full-size, shock-absorbing, water-resistant, nonabrasive, polyethyl-
ene padding.
Concealed Wall Hanger — For snap locking design: Heavy gauge steel construction. Incorporates upper and lower members, which
engage backplate louvers to keep mirror against the wall. For "2S"-Tab design: Incorporates upper bracket engaging in upper louver
and double sided tape below the bottom louver securing mirror to concealed wall hanger.
INSTALLATION:
Mount wall hanger on wall with screws (not furnished) at points indicated by an . For plaster or dry wall construction, provide S
backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed
backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide
fiber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.
Snap Locking Design: Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger
members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed flat against the wall approximate-
ly 1" (25mm) above final position and then lowered into final position.
"2S" Tab Design: Comprises of two brackets, while the bottom one is furnished with double side tape. Bottom hanger
bracket's mounting holes must be 1" - 1 1/2" above mirror's bottom edge. Note: Bottom hanger bracket is not supposed to
engage with louvers of mirror's backplate. Hang mirror on wall top hanger bracket with the top two louvers engaged behind top
wall hanger bracket.To do this, mirror must be centered in front of the wall hanger horizontally, pressed only at the top against
the wall approx. 1" (25mm) above final position an then lowered into final position. When lowering, pull mirror's bottom edge
off the wall by preventing bottom bracket from engaging. Once lowered, mirror must be pressed against wall to engage with
double sided tape of lower wall hangar bracket.
Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into final
position (see figure 3). Locking devices may be unlocked by inserting two flat blade screwdrivers behind each side of mirror
near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.
"2S" Tab Design — Secure mirror to concealed wall hanger by pressing mirror against double sided tape of lower hanger
once it is lowered into final position (see figure 4).
SPECIFICATION:
Mirror shall have a one-piece type-430 stainless steel channel frame, with 90 mitered corners; all exposed surfaces shall °
have bright polished finish. Select float glass mirror shall be guaranteed for 15 years against silver spoilage. The back shall be
protected by full-size, shock-absorbing, water-resis tant, nonabrasive, polyethylene padding. Galvanized steel back shall have
integral horizontal hanging brackets located at top and bottom for mounting on concealed wall hanger to prevent the mirror
from pulling away from the wall. Locking devices secure mirror to concealed wall hanger. Mirror shall be removable from the
wall.
Framed Mirror shall be Model B-165 _______________ (insert width and height) of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
Aprox. 1"
25mm
Initial
Position
S
S
Final
Position
C
L
Aprox. 1"
25mm Initial Position
S
Final
Position
C
L
S
Figure: 3 Figure: 4
"2S"-Tab Design - up to 36" Width
(Front View)
Snap Locking Design
(Front View)

Product specificaties

Merk: Bobrick
Categorie: Niet gecategoriseerd
Model: B-165 2436

Heb je hulp nodig?

Als je hulp nodig hebt met Bobrick B-165 2436 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Bobrick

Bobrick

Bobrick B-165 2436 Handleiding

4 April 2025
Bobrick

Bobrick B-166 1836 Handleiding

4 April 2025
Bobrick

Bobrick B-35643 Handleiding

25 September 2024
Bobrick

Bobrick ConturaSeries B-4112 Handleiding

11 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Mr Steam

Mr Steam LEDLITE Handleiding

4 April 2025
Auray

Auray BAC-4A4HB Handleiding

4 April 2025
Kernau

Kernau KSSI 2601 C Handleiding

4 April 2025
Savio

Savio TR-17 Handleiding

4 April 2025
Navman

Navman MiVue SmartBox III Handleiding

4 April 2025
Hortus

Hortus 211-900 Handleiding

4 April 2025
Sabrent

Sabrent CR-U4XB Handleiding

4 April 2025
Planet

Planet CS-6303R Handleiding

4 April 2025
Therm-a-Rest

Therm-a-Rest ProLite Handleiding

4 April 2025
Therm-a-Rest

Therm-a-Rest Trail Pro Handleiding

4 April 2025