ArmyTek Wizard Magnet Handleiding

ArmyTek Lamp Wizard Magnet

Lees hieronder de 📖 handleiding in het Nederlandse voor ArmyTek Wizard Magnet (2 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
THE MOST TECHNICALLY ADVANCED
Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan. .10 years no-hassle warranty
§Amazingly powerful multi-flashlight with 1 250 LED lm brightness powered by only one 18650 Li-Ion battery.
§Rechargeable flashlight with magnet USB charger.
§TIR optics with light angles 70°:120° for wide light without a “tunnel vision” effect.
§Easy operation and 6 convenient brightness modes.
§Due to a side switch button you can operate the multi flashlight- easily with one hand without shifting it aside.
§Compact and light-weight but at the same time durable and multi-functional flashlight.
§Record runtimes up to 1 days of operation on one battery.00
§Magnet in the tailcap, removable clip for fixation on a belt and flat tailcap for vertical standing.
§C l multi flashlightomp ete correspondence to the highest standards of durability and reliability: the - easily withstands fallings,
impacts and vibrations.
Warnings
Remember that old or low-quality batteries can be damaged under heavy load and explode.
Specifications are subject to change without notice.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Model
Wizard XP-L Magnet USB
LED / Optics
Cree / TIRXP-L
Brightness stabilization type
DIGITAL (CPU brightness control)
Light output, LED / OTF lumens*
1250 / 1000
Peak beam intensity, candelas
3560
Hotspot / spill
70 ° / 1 2
Beam distance*
119 meters
Modes, light output (OTF
lumens*) and runtimes
(measured with 18650 Li-Ion
3400mAh until the light output
drops to 10% of the initial
value)
Turbo
1000 lm / 1.5h
Main3
39 lm / .8h0 3
Main2
180 lm / 9h
Main1
30 lm / 48h
Firefly2
2.3 lm / 18d
Firefly1
0.4 lm / 100d
Power source
1x18650 Li-Ion
Size and weight (without batteries)
Length 108mm, body diameter 24.5mm, head diameter 29mm, weight g65
Armytek Optoelectronics Inc.
Web: www.armytek.com Email: service@armytek.com
Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Care and Storage
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.
It is recommended to clean the threads and O-ring off dirt and old grease once or twice per year. Remember that protection s reliable
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.
The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very
bright light can heat objects and be a cause of the fire.
Wizard
Magnet USB
Service and Warranty
Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.
Guarantee does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Longtime application in chlorinated or polluted water, or other liquids (other than water).
4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5. Usage of low-quality batteries.
OperationSet description
Initial Service
To set/replace batteries:
1. Unscrew the tailcap.
2. Place the batteries with the positive contact (+) facing the head of the flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
1.
2.
3. Click x1
OFF Main (if last used)в
Main
Press & Hold
OFF Firefly1 Firefly2в в
Firefly
ON Turboв
Turbo Last modeв
Click x2 Turbo
Main1 Main2в
ез
Main3
Press & Hold
In OFF state:
Click: To turn on the last used mode.
Press and hold: To go through 2 Firefly modes (release to select). Keeping button pressed will start cycling through the Main modes.
In ON state:
Click: To turn off the flashlight.
Press and hold: To start cycling through the Main modes.
Double click: To turn on the Turbo mode. The second double click brings back the last used mode.
For comfortable operation you have a convenient momentary access to all the following modes:
Main. Short click from OFF-state activates the Main mode (if
it was the last mode used previously).
Firefly. Press and hold the button in OFF-state to turn on the
desired Firefly mode and then release immediately. Keeping
the button pressed will start cycling through the Main
modes.
Turbo. The mode is activated by double click in any mode. To
return to the last mode make double-click again.
Cycling through the Main modes. In ON-state press and hold
the button (in any mode): the 3 Main modes will start
switching cyclically. Release the button to select the desired
mode. In Turbo mode it starts cycling through the Main
modes.
Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on.
Lock-out function. Unscrew the tailcap to 1/4 for the protection from accidental switching on.
Low Battery Indication. If the brightness is <25% from the nominal value, the LED flashes 2 times
ONCE (after 30sec from switching on). If you are not sure if it flashed or not switch the flashlight
off and on: in case the battery is low flashes will repeat. Light output decreases to Firefly mode at
critical level.
Active temperature control. T can quickly heat up Turbo . W the he flashlight in mode hen
temperature become +60 C small steps °the brightness decreases by . After cooling-down
( ) Turboprovided that battery voltage is sufficient the brightness increases to the mode again.
This stepping goes cyclically to maintain the user's safety and the flashlight's functionality. In
conditions of good air-cooling the flashlight delivers light without stepping down even in Turbo
mode. There are no preset timers for stepping, but real- active temperature measurements.time
Warning
Low Battery Indication
Critical
вFirefly1
вOFF
Cycling through Modes
We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can
leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in then use
new and quality batteries store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least high- and
once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also recommended to
replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.
Pass the end of the
band through the B
clasp.
Put in the band in the first clasp.A
Put in the bands
through the slots in
the plastic holder
and fix the
flashlight. Adjust
elastic bands to the
size of your head.
3. Unscrew the tailcap for 1/4 of a circle and turn
on a magnet charger device to the tailcap.
Charger device battery indication:
1. Red color the charging is going on.
2. Green color the charging is finished.
3. Red color blinking – unscrew the tailcap
for 1/4 for charging.
1/4
Pass the band A
through the eye of the
band .B
B
A
B
5.
A
A
1.
2.
Pass the end of the band through the A
second clasp and fix it.
4.
To use the headmount with the flashlight: How to turn on a magnet charger:
ьYour flashlight can inconsiderably differ from the pictures in the manual.
ьThe producer reserves the right to change the package at his own discretion without modifying this manual.
Wizard
Magnet USB
x2
Items included in the package:
1 - Flashlight 6 - 2 spare O-rings
2 - Clip 7 - Magnet USB charger
3 - User manual 8 - Plastic holder
4 - 18650 Li-Ion battery
5 - Headband (2 straps)
2
3
5
6
8
1
7
4


Product specificaties

Merk: ArmyTek
Categorie: Lamp
Model: Wizard Magnet

Heb je hulp nodig?

Als je hulp nodig hebt met ArmyTek Wizard Magnet stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp ArmyTek

Handleiding Lamp

Nieuwste handleidingen voor Lamp