ArmyTek Wizard C1 Pro Handleiding

ArmyTek Lamp Wizard C1 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor ArmyTek Wizard C1 Pro (33 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/33
WIZARD C1 PRO
MULTI FLASHLIGHT
2 ENG USER MANUAL
6 GER BENUTZERANLEITUNG
10 FRA MANUEL D’UTILISATEUR
14 RUS РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
18 FIN YTTÖOHJE
22 SWE ANVÄNDARMANUAL
26 NOR BRUKSANVISNING
30 POL INSTRUKCJA OBSŁUGI REV_00-0001
2 ENG USER MANUAL WIZARD C1 PRO REV_00-0001
Headlamp: simple one-hand operation, reliable headmount. Solid body
without long wires, weak rubber connectors and unnecessary boxes.
The flashlight is easily installed, removed and 180° rotatable in the
mount
Every Day Carry light: compact design, convenient side button, spe-
cial matt anti-abrasive finish without rough knurling, strong built-in tail
magnet and robust removable steel clip
Bicycle light: body made from durable and lightweight aircraft-grade
aluminium, improved shock resistance, spring in the tailcap for better
battery and driver protection. Constant light without flickering, optional
quick-release mount
Keychain light: compact and lightweight for even more comfortable
carry in a pocket, hole for keyring or lanyard in the tailcap
Multicolor temperature, battery level and state indication with the
ability to turn o the latter
Specifications
Convenient wide beam of fully upgraded optical system, TIR-lense
is protected from scratches by tempered glass with anti-reflective
coating
Innovative technology allows using any standard 18350 Li-Ion batte-
ries and provides full protection against short circuit even in case of
contact between magnetic connector and metal objects
Active real-time temperature control to prevent overheating
above +58 °C
Total protection from water, dirt and dust in accordance with IP68
standard — flashlight continues to work even at 10 meters depth.
Withstands fallings from up to 10 meters
Robust and water resistant magnetic connector
ENG USER MANUAL
Thank you for choosing the products of Armytek.
Please read this manual carefully before using the flashlight.
Model Wizard C1 Pro (White)
LED/Optics Samsung LH351D/TIR
Brightness stabilization type DIGITAL (CPU brightness control)
Light output 1000 lm
Peak beam intensity 2510 cd
Hotspot : Spill 70°:120°
Beam distance 100 m
Modes, light output and runtimes (measured
with 18350 Li-Ion 900 mAh battery until the
light output drops to 10% of the initial value)
Turbo2 1000 lm/55 min (500 lm after 5 min)
Turbo1 440 lm/1 h 24 min
Main3 210 lm/3 h
Main2 100 lm/6 h 40 min
Main1 40 lm/16 h 30 min
Firefly3 7 lm/2.5 d
Firefly2 2 lm/8 d
Firefly1 0.11 lm/60 d
Strobe3 1000 lm/10 Hz/1 h
Strobe2 1000 lm/1Hz/2 h 20 min
Strobe1 100 lm/1 Hz/32 h
Power source 1x18350 Li-Ion
Length/Body diameter/Head diameter 76.3 mm/20.4 mm/33 mm
Weight without/with battery 55 g/80 g
Dust, water and impact resistance IP68. Submersion at 10 m up to 2 h. Fallings from 10 m
XLight output for flashlights with Warm light is about 7% less, beam distance is about 3% less. All the above specifications are test results based on ANSI/NEMA FL1-2009 Standard.
The tests are performed using the battery included in the set. The data may vary due to environment, heat dissipation and other factors.
3WIZARD C1 PRO USER MANUAL ENGREV_00-0001
Set description
Flashlight, 18350 Li-Ion 900 mAh battery, magnetic USB charger, clip,
headmount, 2 spare O-rings, user manual.
The producer reserves the right to change the package at his own
discretion without modifying this manual. Specifications are sub-
ject to change without notice.
Initial Service
TO SET/REPLACE BATTERY
1. Unscrew the tailcap.
2. Place the battery with the positive contact (+) facing the head of the
flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
HOW TO CONNECT THE MAGNETIC CHARGER
Unscrew the tailcap to 1/4 of a circle and adjust the magnetic charger
to the tailcap.
CHARGER COLOR INDICATION
Charger not plugged in:
Green — device is in waiting mode.
Charger plugged in:
Green blinking — evaluation of battery voltage.
Red blinking — unscrew the tailcap to 1/4 for charging.
Orange blinking — USB power source voltage is too low for correct
continuation of charging or bad contact between charger and battery.
Clean the tailcap and the threads of the flashlight parts, use a die-
rent power source.
Red — charging with rated charging current is going on.
Orange — USB power source voltage is too low, charging current may
be reduced.
Green — charging is finished.
Operation
Before use: Tighten the tailcap as far as it can go.
GENERAL TYPE
Modes: Firefly1, Firefly2, Main modes, Turbo mode (last used in
Advanced, Turbo2 by default).
In OFF state
1 click: To turn on the last used mode.
Press and hold: To start cycling through Firefly modes. Release to
select. Keeping button pressed will start cycling through Main modes.
In ON state
1 click: To turn o the flashlight.
Press and hold: To start cycling through Main modes from any mode. In
Firefly1 cycling through Main modes starts after cycling through Firefly
modes. Release to select.
2 clicks: To turn on Turbo mode from any mode. The second double click
brings back last used mode.
ADVANCED TYPE
To switch between types of operation unscrew the tailcap to 1/4 while
the flashlight is o, press the button and tighten the tailcap while
keeping the button pressed.
Sections of modes:
[1] – Firefly modes, [2] – Main modes, [3] – Turbo modes,
[4] – Strobe modes
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To turn on Firefly1 mode [Section 1]. Keeping button
pressed will start cycling through modes: Firefly1 - Firefly2 - Firefly3 -
Main1 - Main2 - Main3 - Turbo1.


Product specificaties

Merk: ArmyTek
Categorie: Lamp
Model: Wizard C1 Pro

Heb je hulp nodig?

Als je hulp nodig hebt met ArmyTek Wizard C1 Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp ArmyTek

Handleiding Lamp

Nieuwste handleidingen voor Lamp