ArmyTek Wizard C2 WR Handleiding

ArmyTek Lamp Wizard C2 WR

Lees hieronder de 📖 handleiding in het Nederlandse voor ArmyTek Wizard C2 WR (27 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/27
WIZARD C2 WR
MULTI FLASHLIGHT
2 ENG USER MANUAL
5 GER BENUTZERANLEITUNG
9 FRA MANUEL D’UTILISATEUR
12 RUS РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
16 FIN KÄYTTÖOHJE
19 SWE ANVÄNDARMANUAL
22 NOR BRUKSANVISNING
25 POL INSTRUKCJA OBSŁUGI REV_00-0003
2 ENG USER MANUAL WIZARD C2 WR REV_00-0003
ENG USER MANUAL
Thank you for choosing the products of Armytek.
Please read this manual carefully before using the flashlight.
Specifications
Headlamp: simple one-hand operation, reliable headmount. Solid body
without long wires, weak rubber connectors and unnecessary boxes.
The flashlight is easily installed, removed and 180° rotatable in the
mount. Quick-release rubber ring provides additional fixation
Every Day Carry light: compact design, convenient side button, spe-
cial matt anti-abrasive finish without rough knurling, strong built-in tail
magnet and robust removable steel clip
Bicycle light: body made from durable and lightweight aircraft-grade
aluminium, improved shock resistance, new springs for better bat-
tery and driver protection. Constant light without flickering, optional
quick-release mount. Red light for use as bicycle rear light
• 4 LEDs: amazing beam of red light up to 230 lumens and white light
up to 1100 lumens thanks to 2 LEDs for each color
• Red light is almost invisible for animals, fish and insects, comfortable
for night vision
• 5 brightness modes for each color, easy operation with one button
and double click for switching between white and red light
• Convenient wide beam of fully upgraded optical system, TIR-lense
is protected from scratches by tempered glass with anti-reflective
coating
• Innovative technology allows using any 18650 Li-Ion batteries and
provides full protection against short circuit even in case of contact
between magnetic connector and metal objects
• Active real-time temperature control to prevent overheating above
+58 °C and warning indication of low battery level
• Total protection from water, dirt and dust in accordance with IP68
standard — flashlight continues to work even at 10 meters depth.
Withstands fallings from up to 10 meters
• Robust and water resistant magnetic connector
Set description
Flashlight, 18650 Li-Ion 3200 mAh battery, magnetic USB charger, clip,
headmount, 2 spare O-rings, user manual.
The producer reserves the right to change the package at his own
discretion without modifying this manual. Specifications are sub-
ject to change without notice.
Model Wizard С2 WR (White)
LED/Optics 2 х XD16 (white) + 2 x XQE (red)/TIR
Brightness stabilization type FULL (constant light)
White light Red light
Light output 1100 lm 230 lm
Peak beam intensity 2400 cd 430 cd
Hotspot : Spill 70°:120°
Beam distance 98 m 41 m
Modes, light output and
runtimes (measured with
18650 Li-Ion 3200 mAh
battery until the light output
drops to 10% of the initial
value)
Turbo 1100 lm/2 h 30 min (520 lm after 90 sec) 230 lm/3 h (160 lm after 7 min)
Main2 410 lm/4 h 72 lm/13 h
Main1 130 lm/13 h 18 lm/46 h
Firefly 0.6 lm/65 d 0.1 lm/65 d
Strobe 410 lm/1 Hz/17 h 230 lm/1 Hz/9 h 20 min
Power source 1x18650 Li-Ion
Length/Body diameter/Head diameter 112 mm/20.4 mm/33 mm
Weight without/with battery 65 g /115 g
Submersion and Impact resistance IP68, 10 m for 2 h. Height up to 10 m
XLight output for flashlights with Warm light is about 7% less, beam distance is about 3% less.
All the above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the set.
The data may vary due to environment, heat dissipation and other factors.
3WIZARD C2 WR USER MANUAL ENG
REV_00-0003
Initial Service
TO SET/REPLACE BATTERY
1. Unscrew the tailcap.
2. Place the battery with the positive contact (+) facing the head of the
flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
The flashlight is ready for operation.
HOW TO CONNECT THE MAGNETIC CHARGER
Unscrew the tailcap to 1/4 of a circle and adjust the magnetic charger
to the tailcap.
CHARGER COLOR INDICATION
Charger not plugged in:
• Green — device is in waiting mode.
Charger plugged in:
• Green blinking — evaluation of battery voltage.
• Red blinking — unscrew the tailcap to 1/4 for charging.
• Orange blinking — USB power source voltage is too low for correct
continuation of charging or bad contact between charger and battery.
Clean the tailcap and the threads of the flashlight parts, use a die-
rent power source.
• Red — charging with rated charging current is going on.
• Orange — USB power source voltage is too low, charging current may
be reduced.
• Green — charging is finished.
Operation
Before use: Tighten the tailcap as far as it can go.
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To turn on Firefly mode of the last used light. Keeping
button pressed will start cycling through modes of the chosen light.
Release to select.
In ON state:
1 click: To turn o the flashlight.
Press and hold: To start cycling through modes of the chosen light.
Release to select.
2 clicks: To change between white and red light in any mode.
Add/Remove Strobe modes. Unscrew the tailcap to 1/4 while the
flashlight is o, press the button, tighten the tailcap while keeping the
button pressed and then unscrew it again.
MOMENTARY ACCESS
Firefly. Press and hold the button in OFF state to start cycling through
Firefly modes. Release to select. Keeping button pressed will start
cycling through Main modes.
Main. Short click from OFF state activates Main mode if it was the last
used mode.
Turbo. Double click in any mode in ON state. The second double click
brings back last used mode.
Cycling through Main modes. In ON state press and hold the button
in any mode. Main modes will start switching cyclically. In Firefly1
cycling through Main modes starts after cycling through Firefly modes.
Release to select.
Automemorizing. After switching o the last used mode is memorized
for quick access at next switching on.
Active temperature control. When the temperature of the flashlight
becomes close to +58 °С, brightness decreases to safe value, allowing
the flashlight to avoid overheating for a long period of time. In condi-
tions of good air-cooling the flashlight delivers light without stepping
down.

Product specificaties

Merk: ArmyTek
Categorie: Lamp
Model: Wizard C2 WR

Heb je hulp nodig?

Als je hulp nodig hebt met ArmyTek Wizard C2 WR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lamp ArmyTek

ArmyTek

ArmyTek Wizard C1 Pro Handleiding

27 Maart 2024
ArmyTek

ArmyTek Tiara C1 Handleiding

27 Maart 2024
ArmyTek

ArmyTek Zippy WR Handleiding

27 Maart 2024
ArmyTek

ArmyTek Wizard C2 Pro Max Handleiding

27 Maart 2024
ArmyTek

ArmyTek Viking Pro Handleiding

27 Maart 2024
ArmyTek

ArmyTek Wizard C2 WUV Handleiding

27 Maart 2024
ArmyTek

ArmyTek Predator Pro Handleiding

27 Maart 2024
ArmyTek

ArmyTek Wizard C2 WR Handleiding

27 Maart 2024
ArmyTek

ArmyTek Tiara C1 Pro Handleiding

27 Maart 2024
ArmyTek

ArmyTek Wizard Magnet Handleiding

27 Maart 2024

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Lucide

Lucide Otis 79198/32/61 Handleiding

22 November 2024
Lucide

Lucide Chimney 09926/02/30 Handleiding

22 November 2024
Lucide

Lucide Giada 30472/30/02 Handleiding

22 November 2024
Lucide

Lucide Giada 30472/50/02 Handleiding

22 November 2024
Lucide

Lucide Mirasol 34540/03/31 Handleiding

22 November 2024
Lucide

Lucide Lorenz 74403/04/30 Handleiding

22 November 2024
Lucide

Lucide Nila 77977/01/30 Handleiding

22 November 2024
Lucide

Lucide Rilou 26994/15/31 Handleiding

22 November 2024
Lucide

Lucide Rilou 26994/05/31 Handleiding

22 November 2024
Lucide

Lucide Xanto 26993/15/11 Handleiding

22 November 2024