Angelcare AC417 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Angelcare AC417 (64 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 138 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64
OWNER’S MANUAL
Model AC417 and AC517
Baby Breathing Monitor, with Video
TABLE OF CONTENTS
WARNINGS.......................................................................................................................................................................................................................2
SETUP REQUIREMENTS ...............................................................................................................................................................................................................3
Charging the Parent Unit (9 hours) ...................................................................................................................................................................................... 4
Positioning the movement Sensor Pad ................................................................................................................................................................................5
Setting up the Camera ............................................................................................................................................................................................................. 6
Turning on your monitor ............................................................................................................................................................................................................7
Getting to know your monitor .................................................................................................................................................................................................8
Activating and deactivating additional functions ...........................................................................................................................................................12
Adding accessories .................................................................................................................................................................................................................16
Troubleshooting ........................................................................................................................................................................................................................16
Limited warranty.......................................................................................................................................................................................................................18
Technical specifications ........................................................................................................................................................................................................19
FRENCH ...................................................................................................................................................................................................................................... 21
SPANISH .................................................................................................................................................................................................................................... 41
256AC_07_Manuel_AC517_NA_m4.indd 1 2018-08-15 10:15 AM
12. IMPORTANT SAFETY INSTRUCTIONS
12.1 Heed all warnings – All warnings on the product and in the operating
instructions should be adhered to.
12.2 Follow all instructions – All operating and use instructions should
be followed.
12.3 Water and moisture - DO NOT use this apparatus near water. For
example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
environment or near a swimming pool and the like. Care should be taken
so that objects DO NOT fall onto units and that liquids are not spilled into
either unit or Sensor Pad through its openings.
12.4 Cleaning - Disconnect all units before cleaning. DO NOT immerse in
water any part of the monitor. Clean only with dry cloth.
12.5 Ventilation - DO NOT block any ventilation openings. Allow for proper
ventilation when units are in use. DO NOT cover the Camera or the Parent
Unit with any object such as a blanket. DO NOT place it in a drawer or in
any location which would muffle the sound or interfere with the normal
flow of air.
12.6 Heat sources - DO NOT install near any heat sources such as radiators,
heat registers, stoves, TVs or other apparatus (including ampliers) that
produce heat. Heat can damage the case or electrical parts.
12.7 Power cord protection - Protect the Sensor Pad cord and
adapter’s power cord from being walked on or pinched by furniture
or other items – Power supply cords should be routed so that they
are not likely to be walked on or pinched by items upon or against
them, paying particular attention to cords and plugs, convenience
receptacle, and the point where they exit from the product.
e socket outlet shall be installed near the equipment and shall be easily
accessible. Make sure to plug the adapter to the socket outlet nearest to
the equipment and that is easily accessible. To disconnect from mains,
unplug the adapter.
12.8 Accessories - Only use attachments/accessories specified by the
manufacturer. DO NOT place this product on an unstable cart, stand,
tripod, bracket or table. e product may fall, causing serious injury to a
child or adult and serious damage to the product. Use ONLY with a cart,
stand, tripod, bracket or table recommended by the manufacturer or
sold with the product. Any mounting of the product should follow the
manufacturer’s instructions.
12.9 Unplug this appliance during lightning storms or when not used for
long periods of time.
12.10 Servicing - DO NOT attempt to service this product yourself as
opening or removing covers (except battery door) may expose you to
dangerous voltage or other hazards.
12.11 Replacement parts - When replacement parts are required, be sure
the replacement parts specified by the manufacturer have the same
characteristic as the original part. Unauthorized substitution may result
in fire, electric shock or other hazards.
12.12 Usage - is baby monitor is intended as an aid. It is NOT a substitute
for responsible and proper adult supervision and should not be used as
such. Use this appliance ONLY for its intended use as described in this
manual.
12.13 Power Sources - Operate this product only from the type of power
source indicated on the type plate of the adaptor. If you are unsure of
the type of power supply to your home, consult your dealer or local power
company.
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE. PLEASE READ THE
WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING & USING
THE PRODUCT. FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH OR DAMAGES TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR INFANTS
OLDER THAN 24 MONTHS. THE SENSOR PAD IS NOT INTENDED TO BE USED TO
DETERMINE IF A CHILD IS OUT OF THE CRIB.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare®, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at:
info@angelcarebaby.com
Other countries: Please contact your local distributor: international.
angelcarebaby.com.
WARNINGS
1. THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION. is
product is designed to aid in the monitoring of your child. When using the
monitor, you must still provide the supervision necessary for the continued
safety of your child. Monitoring of premature babies, or those considered
to be at risk, should always be carried out under the supervision of a health
professional. is monitor SHOULD NOT be used as a medical device, nor as
a device to prevent Sudden Infant Death Syndrome (SIDS).
2. When an adapter is plugged into an electrical outlet, DO NOT touch
the exposed end.
3. ALWAYS be sure that both the transmitter and receiver are working
properly and are within range of each other. Test the monitor before first
use, periodically and when changing location of the Camera.
4. ALWAYS be sure to immediately check on baby whenever an alarm
sounds.
5. DO NOT use monitor near water (such as bath tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
6. Keep monitor AWAY from heat sources (such as stoves, radiators, etc.).
7. ALWAYS place both the Camera and the Parent Unit on a flat surface
in an upright position and allow for proper ventilation. DO NOT place on
sofas, cushions, beds, etc. which may block ventilation.
8. is monitor uses public airwaves to transmit signals. e Parent Unit
may pick up signals or interference from other nursery monitors in your
area. Your monitor may even be picked up by other households. To protect
your privacy, make sure both units are turned OFF when not in use.
9. is product contains small parts. Adult assembly required. Exercise
care when unpacking and assembling the product and keep small parts
away from children.
10. When using the monitor, the room temperature should be between
50°F and 104°F (10 °C and 40 °C).
BATTERY WARNING
11. e Parent Unit battery is a replaceable Li-Ion battery. e Wireless
Sensor Pad battery is a replaceable Button Cell Lithium battery. Only use the
Angelcare® recommended replacement battery. Danger of explosion if the
wrong battery is used or if replaced incorrectly. Refer to your user manual
for correct battery installation. DO NOT short circuit supply terminals.
Only use the Angelcare® provided power adapter to charge the battery.
Remove the battery from your Parent Unit if product is to be stored for
an extended period of time. Dispose of batteries according to your local
ordinances. e Button cell battery represents a small part and a choking
hazard. ALWAYS keep all batteries away from children.
FCC AND IC REGULATIONS
RF radiation exposure statement
e Nursery Unit complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
Caution: To maintain the compliance with the FCC’s and Industry
Canada’s RF exposure guideline, install the Nursery Unit at least 7.9”
(20 cm) from ALL persons. e transmitter of this device must not
be co-located or operating in conjunction with any other antenna
or transmitter.
Industry Canada
is product meets the applicable Industry Canada technical
specifications.
CAN ICES-3 (B)/NMB-3 (B)
WARNING
- Strangulation Hazard –
Children have STRANGLED in cords.
KEEP the Nursery Unit and adapter cords OUT of the reach of children
more than 3 feet or 1 meter away.
NEVER use extension cords with adaptors. ONLY use adaptors provided.
is product is NOT a Toy. NEVER allow children to play with it.
is baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as
described in the User’s Guide, safe to use.
2
256AC_07_Manuel_AC517_NA_m4.indd 2 2018-08-15 10:15 AM
12.14 Overloading - DO NOT overload wall outlets, extension cords or
integral convenience receptacles as this can result in a risk of fire or
electric shock.
12.15 Object and Liquid Entry - NEVER push objects of any kind into this
product through casing slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock. NEVER
spill liquid of any kind on the product.
12.16 Antenna - e antenna used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and
must not be collocated or operating in conjunction with any other antenna
or transmitter.
12.17 Power Lines - An outside antenna system should NOT be located
in the vicinity of overhead power lines or other electric light or power
circuit, or where it can fall into such power lines or circuits as contact
with them may be fatal.
12.18 Vibration Source - When the monitor is in use, DO NOT use a bedside
crib, crib mobile or other crib accessories that may produce vibrations.
Other sources of vibrations may include fans, washing machines, loud
music, etc. ese sources of vibration may interfere with the performance
of your Angelcare® monitor and the alarm will not sound if it continues to
detect any movement other than your baby’s. Be sure all vibration sources
are eliminated before using the monitor.
12.19 You may experience false alarms for several reasons. The
most common reason is the Camera has not been turned OFF
after you have removed your baby from the crib. Another reason is
the Sensor Pad has not been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm surface with the Angelcare® logo
side facing up. e sensitivity level may also need to be adjusted. Refer
to Step 5.1. Always be sure to immediately check on baby whenever an
alarm sounds.
12.20 Sensor Pad - Your Sensor Pad can be used in any crib that is stationar y.
If the crib has a spring or slat base, place a hard board between the crib
base and the Sensor Pad measuring at least 33 x 33 cm and 6 mm thick.
Only use your Angelcare® monitor in a stationary sleeping environment such
as a crib where the Sensor Pad can rest on a completely flat, firm surface.
The Sensor Pad is made of plastic and does not permit the
air to circulate. Therefore, mildew build up could develop
underneath the mattress in the Sensor Pad area. We suggest
rotating the mattress regularly to prevent any mildew.
13. IMPORTANT SAFETY INSTRUCTIONS RELATED TO USE OF BATTERIES
13.1 Use ONLY the type and size of battery specified in the owner’s manual.
ere is a risk of explosion if battery is replaced with an incorrect type.
13.2 Charge the battery for 9 hours prior to first use. Be sure to have the
monitor in the OFF position during this period. ONLY use the adapters
included with your monitor.
13.3 DO NOT use these adapters with any other equipment.
13.4 When unplugging the adapter from the Camera, be sure it is switched
to the OFF position.
13.5 DO NOT dispose of batteries in fire. ey may explode. Check with
local regulations for possible special disposal instructions.
13.6 Exercise care in handling batteries in order not to short out the
batteries with conducting materials such as rings, bracelets and keys.
Overcharging, short circuiting, reverse charging, mutilation, or incineration
of batteries must be avoided to prevent one or more of the following
occurrences: release of toxic materials, release of hydrogen and/or oxygen,
gas and rise in surface temperature.
13.7 DO NOT attempt to rejuvenate the battery provided with or identified
for use with this product by heating them. Sudden release of battery
electrolyte may occur, causing burns or irritation to eyes or skin.
13.8 If and when necessary, the battery must be replaced with identical
new ones or equivalent (volts and size).
13.9 Remove the battery from the Parent Unit if you store the product
over 30 days because the battery could leak and damage the product.
13.10 Discard ‘dead’ batteries as soon as possible since ‘dead’ batteries
are more likely to leak in a product. If a battery has leaked or vented, it
should be replaced immediately using protective gloves.
13.11 DO NOT store this product, or the battery provided with or identied
for use with this product, in high-temperature areas.
WARNING (North America Only)
14. Modications not authorized by the manufacturer may void users
authority to operate this device.
14.1 NOTE: is equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ese limits are designed to provide reasonable protection against harmful
interference in a residential installation. is equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
14.2 However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
14.3 is device complies with the part 15 of the FCC Rules and the
Industry Canada license - exempt RSS standards(s). Operation is
subject to the following two conditions:
(1)is device may not cause harmful interference, and
(2) is device must accept any interference received, including
interference that may cause undesired operation.
IC Warning :
15. is device complies with industry Canada RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including inferences that
may cause undesired operation of the device.
15.1 Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Model AC417 and AC517
Baby Breathing Monitor, with Video
SETUP REQUIREMENTS
INCLUDED:
Touchscreen Parent Unit
Tabletop stand with removable
wall mount metal ball
(for Camera Unit)
Hardware
(Screwdriver required
for wall mounting)
Wireless movement Sensor Pad
* Always place Angelcare® logo side up *
Lithium ion
battery pack
(for Parent Unit)
2x AC adapter
(for Parent Unit and
Camera Unit)
2X
CR3032 battery
(for Sensor Pad)
Camera Unit
3
E
N
256AC_07_Manuel_AC517_NA_m4.indd 3 2018-08-15 10:15 AM


Product specificaties

Merk: Angelcare
Categorie: Babyfoon
Model: AC417

Heb je hulp nodig?

Als je hulp nodig hebt met Angelcare AC417 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Babyfoon Angelcare

Handleiding Babyfoon

Nieuwste handleidingen voor Babyfoon

Alecto

Alecto DVM- 360 Handleiding

14 November 2024
Alecto

Alecto DVM-700 Handleiding

14 November 2024
Alecto

Alecto DVM-200 Handleiding

14 November 2024
VTech

VTech RM9751 Handleiding

13 December 2024
VTech

VTech RM5754-2HD Handleiding

13 December 2024
VTech

VTech RM5764-2HD Handleiding

13 December 2024
VTech

VTech VC2105 Handleiding

13 December 2024
VTech

VTech RM2751 Handleiding

13 December 2024
VTech

VTech RM5754HD Handleiding

13 December 2024