British Telecom Digital Video Baby Monitor 1000 Handleiding

British Telecom Babyfoon Digital Video Baby Monitor 1000

Lees hieronder de 📖 handleiding in het Nederlandse voor British Telecom Digital Video Baby Monitor 1000 (4 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

User Guide

Additional Camera

For Digital Video Baby Monitor 1000

Setting up is easy. Just follow the simple steps in this guide.

If you need further assistance, please visit our website www.bt.com/producthelp

to view our advanced user guide or call our helpdesk on *0808 100 6554

* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.

Please

turn

over

Ofﬁces worldwide

The services described in this publication are subject to availability and may be

modiﬁed from time to time. Services and equipment are supplied subject to

British Telecommunications plc’s respective standard conditions of contract.

Nothing in this publication forms any part of a contract.

Registered Ofﬁce: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

Designed and produced by The Art & Design Partnership Ltd.

Printed in China / Issue 1 / ADP11-11

10%

General information

For information on important safety

instructions, cleaning or further help,

please refer to the full user guide at

www.bt.com/producthelp

Guarantee

Your BT Digital Video Baby Monitor 1000 Additional Camera

is guaranteed for a period of 12 months from the date

of purchase.

Subject to the terms listed below, the guarantee will provide

for the repair of, or at BT’s or its agent’s discretion the

option to replace the BT Digital Video Baby Monitor 1000

Additional Camera, or any component thereof, which is

identiﬁed as faulty or below standard, or as a result of inferior

workmanship or materials. Products over 28 days old from

the date of purchase may be replaced with a refurbished or

repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that

occur within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent as instructed.

This guarantee does not cover any faults or defects caused

by accidents, misuse, fair wear and tear, neglect, tampering

with the equipment, or any attempt at adjustment or repair

other than through approved agents.

This guarantee does not affect your statutory rights.

For further information within and outside the 12 month

guarantee, please refer to the full user guide at

www.bt.com/producthelp

Product disposal instructions

The symbol shown here and on the product means

that the product is classed as Electrical or Electronic

Equipment and should not be disposed with other household

or commercial waste at the end of its working life.

The Waste of Electrical and Electronic Equipment (WEEE)

Directive (2002/96/EC) has been put in place to recycle

products using best available recovery and recycling

techniques to minimise the impact on the environment, treat

any hazardous substances and avoid the increasing landﬁll.

Product disposal instructions for residential users

When you have no further use for it, please remove any

batteries and dispose of them and the product as per your

local authority’s recycling processes. For more information

please contact your local authority or the retailer where the

product was purchased.

R&TTE Directive & Declaration

of Conformity

This product is intended for use within the UK.

This equipment complies with the essential requirements

for the Radio Equipment and Telecommunications Terminal

Equipment Directive (1999/5/EC).

For a copy of the Declaration of Conformity

please refer to www.bt.com/producthelp

2. Plug the power adaptor cable (item code

064785) into the socked marked on

the side of the Baby unit and plug the

other end into the mains power and

switch on.

Removing the batteries

If you ever need to remove the batteries,

unplug the power adaptor, then open the

battery compartment cover and use the

ribbon to gently pull them out.

The Camera unit can be wall mounted using the wall mounting

bracket supplied. For instructions, see your original BT Digital Video

Baby Monitor 1000 User guide or view online at www.bt.com/producthelp

Find out more

• New Frequently Asked Questions available at www.bt.com/producthelp

• If you need more detailed instructions, the full BT Digital Video Baby Monitor

1000 user guide is available to download from www.bt.com/producthelp

• If you cannot ﬁnd the answer to your problem in the full online

user guide, then please call the free Helpline on 0808 100 6554*.

Our dedicated advisors are more likely to be able to help you than the retailer

where you made your purchase.

• This document is also available in other formats, such as Large print,

Braille and Audio CD. If you would like a copy, please call 0808 100 6554*.

1 Setting up

The Camera unit can be powered up using the power adaptor provided or using

4 AA batteries (not supplied). Even if the power adaptor is used, we recommend

that you also install batteries to guarantee continual operation in the case of a

power cut.

1. Install 4 AA batteries (not supplied) into the battery

compartment as shown observing the polarity

markings inside. Then replace the battery

compartment cover.

The operating time for using AA batteries is

approximately 8 hours depending on light

conditions and feature usage. If you want to monitor

your baby for long periods we strongly recommend

you connect the power adaptor to the Camera unit.

Warning

Do not mix old and new batteries. Only use the recommended type of 4 AA

batteries. Using other types could permanently damage the unit.

Check box contents

Skip

1 Camera unit for the baby’s room 1 mains power adaptor

(item code 064785)

Please refer to your original BT Digital Video Baby Monitor 1000 User guide if you

want to wall mount your Camera unit. This User guide can also be downloaded

from www.bt.com/producthelp

Important: Only use the mains power adaptor supplied in this box or your

product may not work.

This Quick start guide to get your

new camera connected to your

BT Digital Video Baby Monitor 1000

Wall mounting bracket screws (x2) and wall plugs (x2)

Your Additional Camera

Skip

Front

Camera

Infra red LEDs

Back-up light

for night vision.

Power on/off

Press and hold to

turn on or off.

Red light is on

when powered

by batteries.

Green light is on

when powered by

the power adaptor.

Orange light is on when

the Camera unit

is not paired to

the Parent unit.

Flashes red when

the battery is low.

Flashes red and green

alternately when

the Camera unit is in

pairing mode.

Camera angle

adjustment tab

Pull to adjust the

camera angle.

Light sensor

Press to play and

stop lullabies.

Volume +/-

Press to increase or

decrease the volume.

Skip

Press to skip to the

next lullaby.

Microphone

Back

Temperature sensor

Speaker

To listen to lullabies

and parent’s voice

when Talk feature

is used from the

Parent unit.

Power socket

Antenna

Battery

compartment cover

Threaded socket

(6mm)

Used for the wall

mounting bracket

supplied or a tripod

(not supplied).

2 Pairing and testing

You will need to pair your new Camera unit to your BT Digital Video 1000

Parent unit before you can use it. You can pair a maximum of four Camera

units to your Parent unit.

To pair the Camera unit to your Parent unit

1. Firstly, make sure the Camera and Parent units are turned on, by pressing and

holding the power buttons on each unit.

2. Press on the Parent unit.

3. Press or to highlight PAIR/UNPAIR CAM, then press or .

4. Press or again to select .Pair new CAM

5. Press or to choose a Camera unit slot, then press .

6. When the display shows Please press both and keys on CAM side until

POWER indicator ﬂashes Red and Green light, press and hold the and

buttons for 5 seconds on the Camera unit. The light on the button of

the Camera unit will ﬂash red and green alternately.

7. When pairing has been successful, the screen will display the image from the

newly paired Camera unit. The light on the button of the Camera unit

will turn red when it is powered by AA batteries or green when powered by the

power adaptor.

If pairing fails, the screen will display Pairing failed. Try the pairing procedure again.

If you pair a new Camera unit to an already occupied Camera unit slot it will

unpair the current Camera unit. Only one Camera unit can be paired at a time.

Testing the units before use

It is important that you test the units before use and at regular times thereafter,

especially if they have not been used for some time.

To test your units

1. Place the Parent and Camera units in the same room but make sure they are at

least 2 metres apart.

2. Press and hold the button on the Camera unit until the Power light on the

button turns on.

3. Press and hold the button on the Parent unit until the display shows

Waiting for linking and the Link light ﬂashes.

4. Press the button on the Parent unit to view the image from the Camera unit.

If no connection can be established, the Parent unit will display No link to CAM for

a few seconds, then Waiting for linking… The Link light will continue to ﬂash.

Positioning and operating range

Positioning

We recommend you place the Camera unit between 1-2 metres away from your

baby for best performance. Make sure the unit and cable is out of reach of your

baby. Do not place the Parent and Camera units too close together as you will

hear a high-pitched noise, this is normal. The units are designed to be located

at a distance from one another, e.g. in separate rooms.

Operating range

The operating range is up to 300 metres outdoors and 50 metres indoors.

The actual operating range may vary depending on the environmental conditions

and other interferences such as walls, doors and other obstructions.

3 Go!

Switch the Camera unit on/off

1. Press and hold the button until the light on the button turns on.

2. To turn the Camera unit off, press and hold the button for 2 seconds. The

light will turn off.

Adjust the Camera unit loudspeaker volume

You can adjust the loudspeaker volume from Level 1 to Level 5. The default

setting is Level 3. If you adjust the loudspeaker volume it will also adjust the

parent voice (Talk) playback volume.

When the maximum or minimum volume levels have been reached you will

hear an error tone.

1. Press the or button on the Camera unit at any time to increase or

decrease the loudspeaker volume.

Play lullabies from the Camera unit

The Camera unit has ﬁve lullabies that can be played to gently soothe your baby.

The total lullaby playback time is about 15 minutes and it starts from where you

stopped it last time.

To play lullabies

Press the button to play.

Press the Skip button to skip to the next lullaby.

Press the button to stop playback.

Lullaby playback will be paused if the Talk feature is being used from the

Parent unit, when ﬁnished lullaby playback will resume.

Night vision

To help you monitor your baby at night, the Camera unit automatically uses the

light from its infrared LEDs when it is turned on in a dark room. However, it only

transmits black and white images in this mode.

The LEDs on the Camera unit may glow red slightly in dark conditions,

this is normal.

To unpair a Camera unit from the Parent unit

1. Firstly, make sure both units are turned on, then press on the Parent unit.

2. Press or to highlight PAIR/UNPAIR CAM, then press or .

3. Press or to select , then press .Unpair CAM

4. Press or to select the Camera unit you want to unpair,

then press .

5. When the display shows, To unpair CAM # from the system, press key,

press the button.

6. When the display shows, Press key to conﬁrm, press .

7. When unpairing has been successful, the screen will display the image from

the next paired Camera unit. If there is no paired Camera unit, the screen will

display .NO CAM paired

Product specificaties

Merk:	British Telecom
Categorie:	Babyfoon
Model:	Digital Video Baby Monitor 1000
Kleur van het product:	Purple, White
Type stroombron:	Batterij/Accu
Maximumbereik:	300 m
Zender breedte:	103.5 mm
Zender diepte:	78.9 mm
Zender hoogte:	120.6 mm
Transmitter gewicht:	205 g