VTech VM300 Handleiding

VTech Babyfoon VM300

Lees hieronder de 📖 handleiding in het Nederlandse voor VTech VM300 (2 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

User’s manual

VM300

Accessory baby unit with

wide-angle lens

for use with VTech model

VM342

VM342-2

Congratulations

on purchasing your new VTech product.

Before using this product, please read

Important safety instructions.

This manual has instructions on how to set

up and pair your new baby unit. For complete

instructions on using the baby unit, see the

user’s manual that comes with your video and

audio monitor.

For support, shopping, and everything new at

VTech, visit our website at

www.vtechphones.com.

3-month warranty!

Visit www.vtechphones.com.

Registration

enhanced warranty support.

Product news

Learn about the latest VTech

products.

What’s in the box

Connect the baby unit

NOTES

Use only the power adapter supplied with this

product.

Make sure the electrical outlet is not controlled

by a wall switch.

The power adapter is intended to be correctly

oriented in a vertical or ﬂoor mount position. The

prongs are not designed to hold the plug in place

if they are plugged into a ceiling, under-the-table

or cabinet outlet.

Make sure the baby unit and the power adapter

cord are out of reach of children.

•

Overview

1Light sensor

2Camera

3Infrared LEDs

4ON/OFF light

On when the baby unit is turned on

and is paired to the parent unit.

Flashes when the baby unit is not

being viewed; or when the link to the

parent unit is lost.

•

5 Play/Stop

Press to play or stop lullaby on the

baby unit.

•

6Microphone

7 Skip

Press to play the next lullaby.•

VOLUME

Press to adjust the baby unit

speaker volume. It determines the

lullaby volume and talkback volume

transmitted from parent unit.

•

9 ON/OFF switch

Slide to turn on or off the baby unit.•

10 Speaker

11 Temperature sensor

12 Threaded socket

For wall mount installation use.•

13 PAIR

Press and hold to pair to the parent

unit.

•

14 Power jack

Before use

Pair new baby unit

Each newly purchased baby unit (VM300)

must be paired to your video and audio

monitor system (VM342

VM342-2).

NOTES

You can pair a maximum of four baby units to

your parent unit. Each new baby unit must be

paired to the parent unit before use.

Make sure you power on the parent unit before

pairing.

Press MENU when the parent unit is idle.

Press or to choose Pair/Unpair CAM,

then press SELECT.

Press SELECT again to choose Pair CAM.

Press or to choose an empty baby unit

slot, then press SELECT.

The parent unit screen displays Press

and hold the pair button at the CAM

for 5 seconds until the power indicator

flashes.. Immediately press and hold

PAIR on the bottom of the baby unit with

a narrow pointed object such as a pencil.

The LED light ﬂashes quickly.

When pairing is successful, the screen

displays the view of newly paired baby unit in

SINGLE-CAM mode. The LED light on the

new baby unit remains on.

•

NOTES

If pairing fails, the screen displays Pairing failed.

Try the pairing process again.

Only one baby unit can be paired at a time.

Positioning the baby monitor

CAUTION

Keep the baby units out of the reach of your baby.

Never place or mount the baby units inside the

baby’s crib or playpen.

NOTE

To avoid interference from other electronic

devices, place your baby monitor far away from

devices such as wireless routers, microwaves, cell

phones and computers.

Place the baby units more than 1 meter

(3 feet) away from your baby.

> 1m (3ft)

Adjust the angle of the baby unit camera to

aim at your baby.

Place the parent unit more than 1 meter

(3 feet) away from the baby units.

63ē

> 1m (3ft)

< 1m (3ft)

•

CAUTION

The default volume of your parent unit is level 4.

If you experience high-pitched screeching noise

from your baby monitor while positioning:

Make sure your baby units and parent unit are

more than 1 meter (3 feet) apart, OR

Turn down the volume of your parent unit.

Install the lens (optional)

The wide-angle lens (VM101) provided allows

you to view more of your baby’s room from the

parent unit screen. Install the wide-angle lens

onto the baby unit camera as shown below.

Remove the lens

NOTES

When the lens is not in use, cover both sides of

the lens with the lens covers provided to avoid

scratches.

You can purchase and install an extra new

wide-angle lens (VM101) onto your baby unit if

necessary.

•

Mount the baby monitor

(optional)

NOTE

Check for reception strength and camera angle

before drilling the holes.

Place the wall mount bracket on a wall and

then use a pencil to mark the top and the

bottom holes as shown. Remove the wall

mount bracket and drill two holes in the wall

(7/32 inch drill bit).

If you drill the holes into a stud, go to step 3.

-OR-

If you drill the holes into an object other than

a stud, insert the wall anchors into the holes.

Tap gently on the ends with a hammer until

the wall anchors are ﬂush with the wall.

Align the wall mount bracket and screws

with the holes in the wall as shown. Tighten

the screw in the middle hole ﬁrst, so that

the wall mount bracket position is ﬁxed. You

can tighten the other screw in the top hole.

Place the baby unit on the wall mount

bracket. Tighten the screw into the threaded

socket at the bottom to secure the baby unit.

•

-OR-

Insert the screws into the holes and tighten

the screws until only 1/4 inch of the screws

are exposed.

Place the baby unit on the wall mount

bracket. Tighten the screw into the threaded

socket at the bottom to secure the baby unit.

Align the holes on the wall mount bracket

with the screws on the wall, and slide the wall

mount bracket down until it locks into place.

The default angle of the wall mount bracket

is 90 degrees. You can maximize your

baby unit’s viewing angles by tilting the

wall mount bracket.

Hold the baby unit, and then rotate the

knob in anticlockwise direction. This will

loosen the joint of the wall mount bracket.

Tilt your baby unit up or down to adjust to

your preferred angle. Then, rotate the knob

in clockwise direction to tighten the joint

and secure the angle.

Operating range

The operating range of the baby monitor is

up to 300 meters (1,000 feet) outdoors or

50 meters (160 feet) indoors. The actual

operating range may vary depending on

the environmental conditions and other

interferences such as walls, doors and other

obstructions.

Unpair a baby unit

NOTE

Make sure you power on the baby unit and the

parent unit before unpairing the baby unit.

Press MENU when the parent unit is idle.

Press or to choose Pair/Unpair CAM,

then press SELECT.

Press or to choose Unpair CAM, then

press SELECT.

Press or to choose a desired baby

unit, then press SELECT.

The screen displays To unpair CAM X,

press the [ZOOM] key at the Parent

Unit.. Press on the parent unit.

The screen displays Then, press the

[MENU/SELECT] key to confirm.. Press

SELECT to continue.

When unpairing is successful, the screen

displays CAM X is unpaired and returns

to previous menu. If there is no paired

baby unit, the screen displays No CAM is

paired..The LED light on the selected baby

unit ﬂashes slowly.

General product care

To keep this product working well and looking good,

follow these guidelines:

Avoid putting it near heating appliances and

devices that generate electrical noise (for

example, motors or ﬂuorescent lamps).

DO NOT expose it to direct sunlight or moisture.

Avoid dropping the product or treating it roughly.

Clean with a soft cloth.

DO NOT immerse the baby unit in water and do

not clean them under the tap.

DO NOT use cleaning spray or liquid cleaners.

Make sure the baby unit is dry before you connect

them to the mains again.

•

Important safety instructions

When using your equipment, basic safety

precautions should always be followed to reduce the

risk of ﬁre, electric shock and injury, including the

following:

Follow all warnings and instructions marked on

the product.

Adult setup is required.

This product is intended as an aid. It is not

a substitute for responsible and proper adult

supervision and should not be used as such.

This product is not intended for use as a

medical monitor.

Do not use this product near water. For

example, do not use it next to a bath tub, wash

bowl, kitchen sink, laundry tub or swimming

pool, or in a wet basement or shower.

Use only the adapters included with this

product. Incorrect adapter polarity or voltage

can seriously damage the product.

Baby unit power adapter: Output: 5V DC 1A

The power adapters are intended to be correctly

oriented in a vertical or ﬂoor mount position.

The prongs are not designed to hold the plug

in place if it is plugged into a ceiling, under-the-

table or cabinet outlet.

For pluggable equipment, the socket-outlet

shall be installed near the equipment and shall

be easily accessible.

Unplug this product from the wall outlet before

cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

Do not cut off the power adapters to replace them

with other plugs, as this causes a hazardous

situation.

Do not allow anything to rest on the power

cords. Do not install this product where the

cords may be walked on or crimped.

This product should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power

supply in your home, consult your dealer or

local power company.

Do not overload wall outlets or use an extension

cord.

Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.

This product should not be placed in any area

where proper ventilation is not provided. Slots

and openings in the back or bottom of this

product are provided for ventilation. To protect

them from overheating, these openings must

not be blocked by placing the product on a soft

surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator

or heat register.

10.

11.

12.

13.

14.

15.

Never push objects of any kind into this product

through the slots because they may touch

dangerous voltage points or create a short circuit.

Never spill liquid of any kind on the product.

To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the product other than speciﬁed access

doors may expose you to dangerous voltages

or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently

used.

You should test the sound reception every

time you turn on the units or move one of the

components.

Periodically examine all components for damage.

Be aware of possible loss of privacy while using

public airwaves. Conversations may be picked

up by other nursery monitors, cordless phones,

scanners, etc.

Children should be supervised to ensure that

they do not play with the product.

The product is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

SAVE THESE INSTRUCTIONS

Cautions

Use and store the product at a temperature

between 32oF and 104oF.

Do not expose the product to extreme

cold, heat or direct sunlight. Do not put the

product close to a heating source.

Make sure the baby unit(s) and the adapter

cord(s) are always out of reach of the baby,

at least 3 feet away from the baby or crib, to

avoid a possible strangulation hazard.

Never place the baby unit(s) inside the

baby’s crib or playpen. Never cover the baby

unit(s) with anything such as a towel or a

blanket.

Other electronic products may cause

interference with your baby monitor. Try

installing your baby monitor as far away

from these electronic devices as possible:

wireless routers, radios, cellular telephones,

intercoms, room monitors, televisions,

personal computers, kitchen appliances and

cordless telephones.

16.

17.

18.

19.

20.

21.

22.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital cordless

devices):

Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless devices and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration,

WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches

from the pacemaker.

Should NOT place wireless devices directly over

the pacemaker, such as in a breast pocket, when

it is turned ON.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons

using wireless devices.

Electromagnetic fields (EMF)

This VTech product complies with all standards

regarding electromagnetic ﬁelds (EMF). If handled

properly and according to the instructions in this

user’s manual, the product is safe to be used based

on scientiﬁc evidence available today.

The RBRC® seal

The RBRC® seal on the lithium-ion battery indicates

that VTech Communications, Inc. is voluntarily

participating in an industry program to collect and

recycle these batteries at the end of their useful

lives, when taken out of service within the United

States and Canada.

The RBRC® program provides a convenient

alternative to placing used lithium-ion batteries into

the trash or municipal waste, which may be illegal in

your area.

VTech’s participation in RBRC® makes it easy for

you to drop off the spent battery at local retailers

participating in the RBRC® program or at authorized

VTech product service centers. Please call

1 (800) 8 BATTERY® for information on Li-ion

battery recycling and disposal bans/restrictions in

your area. VTech’s involvement in this program is

part of its commitment to protecting our environment

and conserving natural resources.

RBRC® and 1 (800) 8 BATTERY®

are registered trademarks of the

Rechargeable Battery Recycling

Corporation.

•

FCC and IC regulations

FCC Part 15

This equipment has been tested and found

to comply with the requirements for a Class

B digital device under Part 15 of the Federal

Communications Commission (FCC) rules. These

requirements are intended to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy and,

if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which

can be determined by turning the equipment off

and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

WARNING: Changes or modiﬁcations to this

equipment not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

To ensure safety of users, the FCC has established

criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander

according to the intended usage of the product. This

product has been tested and found to comply with

the FCC criteria. The baby unit shall be installed

and used such that parts of all persons’ body are

maintained at a distance of approximately 8 in (20

cm) or more.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

•

Industry Canada

This device complies with Industry Canada licence-

exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference,

including interference that may cause undesired

operation.

The term ‘’IC:‘’ before the certiﬁcation/registration

number only signiﬁes that the Industry Canada

technical speciﬁcations were met.

This product meets the applicable Industry Canada

technical speciﬁcations.

RF radiation exposure statement

The baby unit complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. The baby unit should be installed and

operated with a minimum distance of 8 in (20 cm)

between the baby unit and all persons’ body. Use of

other accessories may not ensure compliance with

FCC RF exposure guidelines. This transmitter must

not be co-located or operating in conjunction with

any other antenna or transmitter. This equipment

complies also with Industry Canada RSS-102 with

respect to Canada’s Health Code 6 for Exposure of

Humans to RF Fields.

For cETL compliance only

Mesures de sécurité importantes

Lorsque vous utilisez votre appareil, vous devriez

toujours suivre certaines mesures de précaution

de base aﬁn de réduire les risques d’incendie,

d’électrocution et de blessures corporelles, dont

ceux qui suivent :

Observez toutes les instructions et mises en

garde inscrites sur l’appareil.

L’installation par un adulte est requise.

Ce produit a été conçu pour être un

dispositif d’appoint seulement. Il n’est pas le

remplacement d’une supervision responsable

et adéquate par un adulte et ne devrait pas être

utilisé comme telle.

Ce produit n’est pas conçu pour être utilisé en

tant que moniteur médical.

N’utilisez pas cet appareil près de l’eau ni de

toute autre source d’humidité, par exemple, près

d’une baignoire, cuve à lessive, évier de cuisine,

dans un sous-sol humide ni près d’une piscine,

dans un soussol humide ou une douche.

N’utilisez que les adaptateurs inclus avec ce

produit. L’utilisation d’un adaptateur dont la

polarité ou la tension serait inadéquate risque

d’endommager sérieusement le produit et mettre

votre sécurité en péril.

Adaptateur de l’unité du bébé : Sortie : 5 V CC 1A

Pour les PRODUITS À BRANCHER À UNE

PRISE DE COURANT, la prise de courant doit

être installée près du produit, aﬁn d’assurer une

accessibilité sécuritaire à la prise de courant.

Lorsqu’ils sont branchés dans une prise de

courant, les adaptateurs secteur ont été conçus

pour être orientés correctement, soit à la

verticale ou au plancher. Les broches n’ont pas

été conçues pour supporter le poids du bloc

d’alimentation et le maintenir en place si celuici

est branché dans une prise au plafond, sous une

table ou dans un meuble.

Débranchez ce produit de la prise de courant

avant de procéder au nettoyage. N’utilisez pas

de nettoyants en aérosols. Utilisez un chiffon

humide pour le nettoyer.

Ne coupez pas les cordons d’alimentation pour

remplacer les ﬁches, car ceci peut présenter un

danger potentiel.

Ne laissez aucun objet reposer ni appuyer sur

le cordon d’alimentation. N’installez pas cet

appareil dans un endroit où l’on risque d’écraser

le cordon d’alimentation ou de le piétiner.

Ne faites fonctionner cet appareil qu’avec le

type d’alimentation indiqué sur l’étiquette. Si

vous ne connaissez pas le type d’alimentation

que vous possédez à votre domicile, consultez

votre marchand ou votre compagnie locale

d’électricité.

Ne surchargez pas les prises de courant

murales ni les rallonges électriques.

Ne placez pas cet appareil sur un chariot,

meuble, trépied, support de montage ni table

chancelants.

Les trous et ouvertures du boîtier, situés à

l’arrière de l’appareil ou sous celui-ci, servent à

aérer l’appareil. Pour l’empêcher de surchauffer,

ne bloquez sous aucun prétexte ces ouvertures

et n’empêchez pas l’aération adéquate de

l’appareil en le plaçant sur un lit, divan, tapis ou

toute autre surface similaire. De même, ne le

positionnez pas à proximité ni au-dessus d’une

source de chaleur ou d’un calorifère. De plus,

ne placez pas l’appareil dans un endroit avant

de vous assurer qu’il y ait une bonne circulation

d’air.

N’enfoncez jamais d’objets à travers les

ouvertures de cet appareil, car ils pourraient

entrer en contact avec des points de tension

dangereux ou causer des courts-circuits qui

peuvent dégénérer en incendies ou en risques

d’électrocution. Ne renversez jamais de liquide

dans ce produit.

Aﬁn de réduire les risques d’électrocution, ne

démontez pas cet appareil, mais apportez-le

dans un centre de service autorisé. L’ouverture

du boîtier ou le retrait de toutes pièces que

contient cet appareil, à l’exception de l’accès

autorisé à certaines portes ou ouvertures,

risque de vous exposer à des points de tension

10.

11.

12.

13.

14.

15.

16.

17.

dangereux ou d’autres dangers. Un remontage

incorrect peut par la suite présenter des risques

d’électrocution.

Vous devriez tester la réception chaque fois que

vous mettez l’appareil en fonction.

Examinez les composantes aﬁn de vériﬁer si

celles-ci ne sont pas endommagées.

Soyez avisé de la perte de la conﬁdentialité

lorsque vous utilisez les ondes publiques. Les

conversations peuvent être entendues par

d’autres moniteurs de bébé, des téléphones

sans ﬁl, des scanneurs, etc.

Les enfants devraient être supervisés aﬁn

de vous assurer qu’ils ne jouent pas avec

l’appareil.

Le produit n’est pas conçu pour être utilisé

par des personnes (incluant des enfants) aux

capacités physiques, sensorielles ou mentales

réduites ou qui manquent d’expérience et de

connaissances, à moins qu’on leur ait donné

sufﬁsamment de supervision ou d’instructions

relativement à l’utilisation de l’appareil par une

personne responsable de leur sécurité.

CONSERVEZ CES INSTRUCTIONS

Mises en garde

Utilisez et entreposez le produit à une

température entre 0˚ C (32˚F) et 40˚C (104˚ F).

N’exposez pas cet appareil à des froids ou des

chaleurs extrêmes, ainsi qu’à la lumière directe

du soleil. Ne l’installez pas près d’une source de

chauffage.

Assurez-vous que le moniteur et le cordon

de l’adaptateur sont toujours hors de portée

des enfants, à au moins 1 mètre (3 pieds) de

l’enfant ou du berceau, pour éviter tout risque

de strangulation.

Ne jamais placer le moniteur à l’intérieur du

berceau ou du parc de bébé. Ne jamais couvrir

le moniteur ou l’unité (s) portative avec un

article tel une serviette ou une couverture.

D’autres équipements électroniques peuvent

produire des interférences sur votre moniteur

vidéo et audio. Tentez d’installer votre moniteur

vidéo ou audio à l’écart des appareils

électroniques tels que des routeurs sans fil,

radios, téléphones cellulaires, interphones,

moniteurs, téléphones, ordinateurs personnels,

électroménagers et téléphones sans fil.

18.

19.

20.

21.

22.

Stimulateurs cardiaques implantés dans

l’organisme

Les simulateurs cardiaques (ne s’applique qu’aux

dispositifs numériques sans fil) :

L’organisme ‘Wireless Technology Research, LLC

(WTR)’, une firme de recherche indépendante,

a mené une évaluation pluridisciplinaire des

interférences entre les téléphones sans fil portatifs

et les stimulateurs cardiaques implantés dans

l’organisme. Appuyée par l’Administration des

aliments et drogues (FDA) des États-Unis, la firme

WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

Vous devriez maintenir les dispositifs sans fil à

au moins six pouces du simulateur cardiaque.

Ils ne doivent PAS placer le téléphone sans fil

directement sur le stimulateur cardiaque, tel que

dans une poche de chemise, lorsque celui-ci est

en marche.

L’étude effectuée par l’organisme WRS n’a

pas identifié de risque pour les détenteurs de

simulateurs cardiaques causés par les gens qui

utilisent dispositifs sans fil à proximité de ceux-ci.

Champs électromagnétiques (EMF)

Ce produit de VTech est conforme à toutes

les normes se rapportant aux champs

électromagnétiques (EMF) standard. Si vous le

manipulez correctement en suivant les instructions

de ce guide, son utilisation sera sécuritaire pendant

de nombreuses années, selon les meilleures

évidences scientifiques dont nous disposons

aujourd’hui.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants

to the holder of a valid proof of purchase

(“Consumer” or “you”) that the Product and

all accessories provided in the sales package

(“Product”) are free from defects in material and

workmanship, pursuant to the following terms

and conditions, when installed and used normally

and in accordance with the Product operating

instructions. This limited warranty extends only to

the Consumer for Products purchased and used in

the United States of America and Canada.

•

What will VTech do if the Product is not free

from defects in materials and workmanship

during the limited warranty period (“Materially

Defective Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair

or replace at VTech’s option, without charge,

a Materially Defective Product. If we repair

the Product, we may use new or refurbished

replacement parts. If we choose to replace the

Product, we may replace it with a new or refurbished

Product of the same or similar design. We will

retain defective parts, modules, or equipment.

Repair or replacement of the Product, at VTech’s

option, is your exclusive remedy. VTech will return

the repaired or replacement Products to you in

working condition. You should expect the repair or

replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends

for ONE (1) YEAR from the date of purchase. If

VTech repairs or replaces a Materially Defective

Product under the terms of this limited warranty,

this limited warranty also applies to the repaired

or replacement Product for a period of either (a)

90 days from the date the repaired or replacement

Product is shipped to you or (b) the time remaining

on the original one-year warranty; whichever is

longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, ﬁre, water or other

liquid intrusion; or

2. Product that has been damaged due to repair,

alteration or modiﬁcation by anyone other than an

authorized service representative of VTech; or

3. Product to the extent that the problem experienced

is caused by signal conditions, network reliability,

or cable or antenna systems; or

4. Product to the extent that the problem is caused

by use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for

repair from outside the United States of America

or Canada, or used for commercial or institutional

purposes (including but not limited to Products

used for rental purposes); or

7. Product returned without a valid proof of purchase

(see item 2 on the next page); or

8. Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit

our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls

and features may save you a service call.

Except as provided by applicable law, you assume

the risk of loss or damage during transit and

transportation and are responsible for delivery

or handling charges incurred in the transport of

the Product(s) to the service location. VTech

will return repaired or replaced Product under

this limited warranty. Transportation, delivery or

handling charges are prepaid. VTech assumes no

risk for damage or loss of the Product in transit.

If the Product failure is not covered by this limited

warranty, or proof of purchase does not meet the

terms of this limited warranty, VTech will notify you

and will request that you authorize the cost of repair

prior to any further repair activity. You must pay

for the cost of repair and return shipping costs for

the repair of Products that are not covered by this

limited warranty.

What must you return with the Product to get

warranty service?

Return the entire original package and

contents including the Product to the VTech

service location along with a description of the

malfunction or difﬁculty; and

Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product

model) and the date of purchase or receipt; and

Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive

agreement between you and VTech. It supersedes

all other written or oral communications related to this

Product. VTech provides no other warranties for this

Product. The warranty exclusively describes all of

VTech’s responsibilities regarding the Product. There

are no other express warranties. No one is authorized

to make modiﬁcations to this limited warranty and you

should not rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you

speciﬁc legal rights, and you may also have other

rights, which vary from state to state or province to

province.

Limitations: Implied warranties, including those of

ﬁtness for a particular purpose and merchantability

(an unwritten warranty that the Product is ﬁt for

ordinary use) are limited to one year from the date

of purchase. Some states/provinces do not allow

limitations on how long an implied warranty lasts,

so the above limitation may not apply to you. In no

event shall VTech be liable for any indirect, special,

incidental, consequential, or similar damages

(including, but not limited to lost proﬁts or revenue,

inability to use the Product or other associated

equipment, the cost of substitute equipment, and

claims by third parties) resulting from the use of this

Product. Some states/provinces do not allow the

exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may

not apply to you.

Please retain your original sales receipt as proof

of purchase.

Technical specifications

Frequency

control Crystal controlled PLL synthesizer

Transmit

frequency 2406 - 2475 MHz

Channels 24

Nominal

effective

range

Maximum power allowed by FCC

and IC. Actual operating range may

vary according to environmental

conditions at the time of use.

Power

requirements Output: 5V DC @ 1A

Credits:

The Background Noise sound ﬁle was created by Caroline

Ford, and is used under the Creative Commons license.

The Stream Noise sound ﬁle was created by Caroline Ford,

and is used under the Creative Commons license.

The Crickets At Night sound ﬁle was created by Mike Koenig,

and is used under the Creative Commons license.

The Heart Beat sound ﬁle was created by Zarabadeu, and

is used under the Creative Commons license.

Specifications are subject to change without notice.

Document order number: 91-010041-030-100

Product specificaties

Merk:	VTech
Categorie:	Babyfoon
Model:	VM300

Heb je hulp nodig?

Als je hulp nodig hebt met VTech VM300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Babyfoon VTech

VTech RM9751 Handleiding

13 December 2024

VTech RM5754-2HD Handleiding

13 December 2024

VTech RM5764-2HD Handleiding

13 December 2024

VTech VC2105 Handleiding

13 December 2024

VTech RM2751 Handleiding

13 December 2024

VTech RM5754HD Handleiding

13 December 2024

VTech VM3252 Handleiding

16 November 2024

VTech RM5764HD Handleiding

16 November 2024

VTech DM1211 Handleiding

16 November 2024

VTech RM5766HD Handleiding

27 Februari 2024

Handleiding Babyfoon

Nieuwste handleidingen voor Babyfoon

Alecto DVM-200 Handleiding

14 November 2024

Oricom SC330 Handleiding

10 December 2024

Alecto DVM200XL Handleiding

4 December 2024

D-Link DCS-825L Handleiding

23 November 2024

Chipolino Polaris Handleiding

16 November 2024

Neno Bambino Handleiding

15 November 2024

Babymoov YOO-Care A014422 Handleiding

15 November 2024

Oricom RVSL01 Handleiding

10 November 2024

Oricom RGB Handleiding

10 November 2024

Alecto DVM2028 Handleiding

5 November 2024