Vibell OR-VID-MB-1083 Handleiding

Vibell Intercomsysteem OR-VID-MB-1083

Lees hieronder de 📖 handleiding in het Nederlandse voor Vibell OR-VID-MB-1083 (9 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
Operating and installation instructions
Video doorphone set Pacto
OR-VID-MB-1083/B
STOP!
2
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS .............................................................................................................................. 2
2. CHARACTERISTICS OF THE SET ............................................................................................................... 3
3. TECHNICAL DATA ....................................................................................................................................... 3
4. SET CONSTRUCTION ................................................................................................................................. 4
5. INSTALLATION ............................................................................................................................................. 5
MONITOR INSTALLATION ........................................................................................................................................... 5
OUTDOOR UNIT WITH CAMERA INSTALLATION ................................................................................................. 5
6. WIRING DIAGRAMS ................................................................................................................................... 6
7. SET OPERATION .......................................................................................................................................... 7
8. RFID READER .............................................................................................................................................. 8
9. CLEANING AND MAINTENANCE ................................................................................................................ 8
10. TROUBLESHOOTING ................................................................................................................................ 8
1. SAFETY INSTRUCTIONS
Before using the device, read this Service Manual and keep it for future use. The manufacturer is not responsible for any
damage that can result from improper device installation or operation. Any repair or modification carried out by yourselves
results in loss of guarantee. Installation and commissioning of the equipment by the customer are possible if the installer
has basic knowledge of electrical systems and the use of proper tools. In view of the fact that the technical data are
subject to continuous modifications, the manufacturer reserves a right to make changes to the product characteristics
and to introduce different constructional solutions without deterioration of the product parameters or functional quality.
Additional information about ORNO products is available at www.orno.pl. Orno-Logistic Sp. z o.o. holds no responsibility
for the results of non-compliance with the provisions of the present Manual Orno-Logistic Sp. z o.o. reserves the right to
make changes to the Manual - the latest version of the Manual can be downloaded from www.orno.pl Any translation/
interpretation rights and copyright in relation to this Manual are reserved.
1. Disconnect the power supply before performing any activities.
2. Do not immerse the product in water or other liquids.
3. Do not operate the device with damaged housing.
4. Do not break the seals or open the device and do not repair it yourself.
5. Do not use the device contrary to its dedication.
6. Do not install the monitor near devices that strongly emit magnetic fields such as TV, speakers.
7. Do not install the monitor in a place exposed to high moisture, vibration, shock and strong sunlight.
8. Turn off the power if there is a concerning sound coming from the device.
9. Remove the protective film from the monitor screen after installation and mounting.
Each household is a user of electrical and electronic equipment, and hence a potential producer of
hazardous waste for humans and the environment, due to the presence of hazardous substances, mixtures
and components in the equipment. On the other hand, used equipment is valuable material from which we
can recover raw materials such as copper, tin, glass, iron and others. The WEEE sign placed on the equipment,
packaging or documents attached to it indicates the need for selective collection of waste electrical and
electronic equipment. Products so marked, under penalty of ne, cannot be thrown into ordinary garbage along with
other waste. The marking means at the same time that the equipment was placed on the market after August 13, 2005.
It is the responsibility of the user to hand the used equipment to a designated collection point for proper processing.
Used equipment can also be handed over to the seller, if one buys a new product in an amount not greater than the
new purchased equipment of the same type. Information on the available collection system of waste electrical
equipment can be found in the information desk of the store and in the municipal oce or district oce. Proper handling
of used equipment prevents negative consequences for the environment and human health!
12/2023
3
2. CHARACTERISTICS OF THE SET
The videodoorphone is designed for installation in 1-family buildings.
Functions:
- simultaneous view and hold of a conversation with a person in front of an entrance;
- direct control of an electric door strike;
- gate control;
- built-in RFID reader allows access with proximity cards and tags;
- infrared LED lighting enables night vision;
- adjustment of monitor parameters (image brightness, saturation, volume);
- intercom function when additional monitors are used.
Key features:
- high quality color camera;
- outdoor unit housing for surface mounting (rainshield included);
- 4,3” LCD color monitor;
- set can be expanded with two additional monitors;
- 16 ringtones to choose from;
- 4-wire installation (electric door strike connected to the outdoor unit by 2 wires no additional power supply required; ).
3. TECHNICAL DATA
TYPE OF THE DEVICE:
INSTALLATION METHOD:
COMMUNICATION SYSTEM:
single family
4-wire
wired
MONITOR
SCREEN SIZE:
RESOLUTION:
STANDARD:
FUNCTIONS:
NUMBER OF MELODIES:
VOLUME CONTROL:
CALL TIME:
MONITORING TIME:
POWER SUPPLY:
POWER CONSUMPTION:
ELECTRICAL STRIKE CONTROL:
GATE CONTROL:
WORKING TEMPERATURE:
INSTALLATION:
MATERIAL:
DIMENSIONS:
NET WEIGHT:
4,3”
480x272
PAL
call, monitoring, door and gate control,
monitor and volume control, intercom
16
yes
120s
40s
15V DC 1A
standby <2W; work <5W
yes (12V DC max. 300mA - powered from monitor)
yes (dry contact)
-20°C ~ +50°C
surface-mounted
plastic
1 x143x37 21mm
0,26kg


Product specificaties

Merk: Vibell
Categorie: Intercomsysteem
Model: OR-VID-MB-1083

Heb je hulp nodig?

Als je hulp nodig hebt met Vibell OR-VID-MB-1083 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Intercomsysteem Vibell

Handleiding Intercomsysteem

Nieuwste handleidingen voor Intercomsysteem