Viking E-1600-20A-EWP Handleiding

Viking Intercomsysteem E-1600-20A-EWP

Lees hieronder de đź“– handleiding in het Nederlandse voor Viking E-1600-20A-EWP (12 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Features Applications
Specifications
www.VikingElectronics.com
Information: 715-386-8861
ADA* Compliant Emergency Phones with
Built-In Digital Voice Announcer
• Automatic Noise Canceling (ANC) feature for clear audio in noisy environments
• Meets the latest ASME A17.1 code when used with the optional LV-1K Line Verification
Panel, see DOD 246
• Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 16 seconds of voice memory
• Advanced call progress detection
• Handsfree operation
• Phone line powered
• Non-volatile memory (no batteries required)
• Marine grade 316 stainless steel prevents corrosion on stainless models
• Dials up to 5 emergency numbers
• and dial up to 3 non-emergency “INFO” numbers E-1600-20A E-1600-52A
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet
IP66 Ingress Protection Rating, see DOD 859
• Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Extended temperature range (-30°F to 170°F)
• 16 different chassis or board only available
• Available in 42” tall tower phone model E-1600A-BLT-EWP DOD 217 ( )
• Central Station Monitoring capability (dials 2 numbers)
• Optional Polling System available ( ) PB-100 DOD 232
• Optional strobe light kit available ( ) BLK-4-EWP DOD 654
• Optional Six Port Concentrator available ( ) LC-6 DOD 245
• Optional LV-1K DOD 246 Line Verification Panel available ( )
• Optional Pedestal Mounting Kit ( ) E-1600A-MK-GNP DOD 227
• Optional Panic Button Kit ( ) PB-1 DOD 233
• Also available with VoIP interface, see for more informationDOD 255
Power: Telephone line powered.
Minimum 24V DC talk battery voltage, with
a minimum loop current of 20mA loop. Loop current may be boosted on low
current lines with a Viking model Talk Battery Booster (DOD 632).TBB-1B
Dimensions: See Installation and Specifications
Operating Temperature: -30° F to 170° F (-34° C to 77° C)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
CAUTION - When installing on an analog extension of a phone system:
Some phone systems do not conform to analog telecom standards and might
not be compatible with the 1600A Series emergency phones. For a detailed
description of the telephone line specifications required for any of the 1600A
Series DOD 869 phones, see .
* Americans with Disabilities Act of 1992 contains federal regulations
regarding elevator telephones (Public Law 101-336).
• Elevators
• Parking ramps/lots
• Emergency pool phones
• ATM machines
• Area of refuge locations
• Lobbies
• Silent holdup alarm dialer using optional Panic Button Kit
• Entryways
• Campus emergency stations
• Roadside emergency stations
• Stadiums
• Convention centers
E-1600-45A
K-1600-EHFA
E-1600A
E-1600-02A
E-1600-03B
E-1600-20A E-1600-55A
E-1600-30A
E-1600-65A E-1600-60A
The 1600A Series ADA Compliant Emergency Phones are designed to provide quick
and reliable handsfree communication for any standard analog telephone line or analog
phone system station port. All phones meet ADA requirements for1600A Series
elevator/ emergency telephones, and can be programmed from any touch tone phone.
The phones can dial up to 5 programmable emergency numbers, as well as 2 central
station numbers. In addition, the and feature a second "E-1600-20A E-1600-52A INFO"
button that will dial up to 3 non-emergency numbers.
The 1600A Series phones can be programmed to automatically deliver a digital
announcement to identify the location of the emergency call. Alternatively, a DTMF touch
tone code may also be delivered. A “Call Connected” LED can be initiated manually or
automatically. All programming parameters, including phone numbers and location
numbers, are stored in non-volatile memory. All units are phone line powered, requiring
no batteries or external power and are compatible with common Central Station
Monitoring equipment.
For outdoor installations where the unit is exposed to precipitation or condensation, select
1600A Series phones are available with Enhanced Weather Protection (EWP). EWP
products are designed to meet IP66 standards and may feature foam rubber gaskets,
sealed connections, gel-filled butt connectors, as well as potted circuit boards with
internally sealed, field-adjustable trim pots and DIP switches for easy onsite
programming. For more information on EWP, see DOD 859.
E-1600-32A
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA 1600A Series
ADA Compliant
Emergency Phone
October 2, 2023
SECURITY & COMMUNICATION
VIKING
E-1600-SSA E-1600-RDA E-1600-YLA E-1600-BLA E-1600-BLPA E-1600-BKA
Wiring
-OR-
C.O. Line
Analog
PABX/KSU Station Rear View of a 1600A Series Phone
****
* Drip Loop
*** Gel-Filled Butt
Connectors
Red
Green
Ring
Terminal
(included)
** Earth
Ground
(optional)
**** Note: When installing a line powered phone on a low voltage and/or low loop current phone system
extension, a Talk Battery Booster may be required, see for more info.TBB-1B DOD 632
* Note: When wires are routed from above, a “drip loop” is
recommended to keep water away from the circuit board.
*** Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26
gauge wire with a maximum insulation of 0.082 inches. Cut off bare wire ends prior to terminating.
Dimensions: 5.25” x 4.0” x 2.0” (133 mm x 102 mm x 51 mm)
Shipping Weight: 2.5 lbs (1.13 kg)
Material: 0.062” thick (16 gauge) steel
Finish: E-1600A - Red powder paint
- Red powder paint, no “EMERGENCY PHONE” verbiage E-1600-40A
- Yellow powder paint E-1600-45A
- Blue powder paint with “POLICE” verbiage E-1600-60A
- Blue powder paint E-1600-65A
Connections: Gel-filled butt connectors
Mounting: Surface mount to walls, posts, single gang boxes or 4” x 4” electrical junction boxes,
or recess mount in elevator phone boxes. Attach the mounting plate in desired location and
connect the wires. Then, secure the phone to the mounting plate with the provided set screw.
2.00
4.00
5.25
0.703
diameter
4.96
3.40
3.40
1.70
1.70
3.30
3.82
2.00
1.15
EMERGENCY
PHONE
CALL
CONNECTED
PUSH FOR
VIKING©
HELP
Grade 2
Braille Label
Red Call
Connected
LED
Push to Call
Button
POLICE
Condensation
Drain Hole
SIDE
VIEW
BOTTOM
VIEW
FRONT VIEW
MOUNTING PLATE
on model E-1600-60A only
3/4" knockout
Model E-1600-45A has
"EMERGENCY" vertically
down the side. Model
E-1600-60A has "POLICE"
vertically down the side.
0.15 x 0.31
Wire Exit Notch
(4) .20 dia.
mounting
holes
(2) .20 x .40
slots for single
gang box
Model E-1600A
shown with
optional VE-GNP
pedestal and
E-1600A-MK-GNP
mounting kit.
Set
Screw
Optional Enhanced Weather Protection (EWP) Available: EWP products
are designed to meet IP66 standards and may feature foam rubber gaskets,
sealed connections, gel-filled butt connectors, as well as potted circuit boards
with internally sealed, field-adjustable trim pots and DIP switches for easy
onsite programming. For more info on EWP, see . DOD 859
Note: For greater weather resistance, apply a bead of clear silicon caulking
around the top edge and sides of the chassis.
Optional Gooseneck Pedestal Mounting Kit: The E-1600A-MK-GNP
Mounting Kit ( ) allows you to mount the DOD 227 E-1600A E-1600-40A, ,
E- E-1600-45A, 1600-60A E-1600-65A VE-GNP or to a Viking Gooseneck
Pedestal ( ).DOD 424
Installation and Specifications
The following sections show specifications and installation instructions for the different chassis in the 1600A Series.
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
E-1600A / E-1600-40A / E-1600-45A / E-1600-60A / E-1600-65A
2
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
** Note: To increase surge protection, loosen the PCB
mounting screw labeled (as shown) and fasten a
wire with ring terminal (included) from the mounting
screw to Earth Ground (grounding rod, water pipe, etc.)
3
2.0
10.0
10.5
0.25
6.25
12.5
13.0
0.25
3.1 3.8
4.8
4.7
EMERGENCY
PHONE
CALL
CONNECTED
PUSH FOR
VIKING
©
HELP
(6) 0.188 diameter
countersunk holes
Push To
Call Button
Minimum
Cutout
Grade 2
Braille
Label
SIDE VIEW
Red Call
Connected
LED
Dimensions: 13” x 10.5” x 2” (330 mm x 267 mm x 51 mm)
Shipping Weight: 7 lbs (3.18 kg)
Connections: Gel-filled butt connectors
Material: 0.105” thick (12 gauge) brushed stainless steel
Mounting: Flush mount in elevator cabs, ATMs, stairwells,
hallways, etc.
Suggested Hardware: (6) #8 x 3/4 flat head phillips sheet
metal type A screws (not included)
Optional Enhanced Weather Protection (EWP)
Available: EWP products are designed to meet IP66
standards and may feature foam rubber gaskets, sealed
connections, gel-filled butt connectors, as well as potted
circuit boards with internally sealed, field-adjustable trim
pots and DIP switches for easy onsite programming. For
more information on EWP, see . DOD 859
Note: When mounting outside to rough or uneven surfaces
(brick, stucco, etc.) apply a bead of clear silicone caulking
around the top edge and sides of faceplate.
E-1600-02A
E-1600-SSA / E-1600-RDA / E-1600-YLA / E-1600-BLA / E-1600-BLPA / E-1600-BKA
Connections: Gel-filled butt connectors
Mounting: Surface mount to walls, posts or single gang electrical boxes. Attach the
mounting plate in desired location and connect the wires. Then, secure the phone to
the mounting plate with provided 8-32 set screws.
Optional Enhanced Weather Protection (EWP) Available: EWP products are designed
to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled
butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim
pots and DIP switches for easy onsite programming. For more info on EWP, see DOD 859.
Note: For greater weather resistance, apply a bead of clear silicon caulking around the
top edge and sides of the chassis.
FRONT VIEW
3.08
5.75
CALL CONNECTED WHEN LIT
EMERGENCY
PHONE
PUSH FOR
VIKING©
HELP
Microphone
1.05
POLICE
(model E-1600-BLPA only)
Grade 2 Braille Label
Push to Call button
with red backlit
Call Connected LED
SIDE
VIEW
MOUNTING PLATE
DIMENSIONS
BOTTOM
VIEW
Speaker
0.30 diameter
countersunk
mounting hole
3.28”
3.90”
2.92”
2.52”
5.32”
0.78” diameter
wire exit hole
0.63”
UP
Mount with
this arrow
pointing up
0.20 x 0.43
mounting slot
(4) 0.20
diameter
mounting
holes
Condensation
Drain Holes
0.313”
Radius
Set Screw Set Screw
Dimensions: 5.75” x 3.08” x 1.05” (146 mm x 78 mm x 27 mm)
Shipping Weight: 2.5 lbs (1.3 kg)
Material / Finish E-1600-SSA only: 0.060” thick (16 gauge) marine grade 316
stainless steel with a #4 brushed finish
Material: 0.060” thick (16 gauge) 304 stainless steel
Finish: E-1600-RDA - Red fine texture powder paint
- Yellow fine texture powder paint E-1600-YLA
- Blue fine texture powder paint E-1600-BLA
E-1600-BLPA - Blue fine texture powder paint with “POLICE” verbiage
- Black fine texture powder paintE-1600-BKA


Product specificaties

Merk: Viking
Categorie: Intercomsysteem
Model: E-1600-20A-EWP
Kleur van het product: Roestvrijstaal
Gewicht: 1000 g
Breedte: 127 mm
Diepte: 57 mm
Hoogte: 127 mm
Materiaal behuizing: Roestvrijstaal
Internationale veiligheidscode (IP): IP66
Plaatsing: Muur
Connectiviteitstechnologie: Bedraad
Certificering: EWP\nIP66\nFCC Part 68\nFCC Part 15\nADA
Aantal knoppen: 2
Gemakkelijk te installeren: Ja
Bedrijfstemperatuur (T-T): -26 - 54 °C

Heb je hulp nodig?

Als je hulp nodig hebt met Viking E-1600-20A-EWP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Intercomsysteem Viking

Handleiding Intercomsysteem

Nieuwste handleidingen voor Intercomsysteem