Thermaltake Pacific R11 Handleiding

Thermaltake Hardwarekoeling Pacific R11

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific R11 (1 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

This product is intended for installation only by expert users. Please consult with a qualified technician for

installation. Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack

and fail ! Do not clean it using alcohol either !

Pacific

R11

Reservoir

Installation Guide

Parts List

Reservoir

Clip

Nuts

Wrench

G1/4 Stop Plug

Wrench

Cable Ties

Long Screws

Ax 2

Bx 4 Cx 4

Dx 1

Ex 3

Fx 1

Gx 4

This product comes with

one mounting kit, please

follow the installation

guide to install it.

Install your fittings and

tubes, remember to use

the bottom as an outlet

and top as an inlet.

After adding the recommended

coolant, remember to fill the

reservoir to only 80% and

leave the fill port cap off. This

will help stabilize your internal

loop pressure

3 4

Fill Port

Five predrilled G1/4” holes

provide multiple options for

placing the G1/4” fittings

as inlet or outlet.

NOTE: The reservoir diagram is for reference only, length may differ depending on the model of reservoir

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific R11
Kleur van het product:	Black, Transparent
Gewicht:	263 g
Hoogte:	110 mm
Maximale temperatuur (in bedrijf):	55 °C
Diameter:	64 mm
Certificering:	Tt LCS
Materiaal:	Polymethyl methacrylate (PMMA), Polyoxymethylene (POM)
Gebruiksvriendelijk:	Ja
Connectie draad:	1/4 "
Koelmiddel:	Vloeistof
Coolant capaciteit:	0.12 l