Thermaltake Pacific PR32-D5 Handleiding

Thermaltake Hardwarekoeling Pacific PR32-D5

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific PR32-D5 (1 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !

Installation Guide

Parts List

Pump & Reservoir Bracket G1/4 Stop Plug Wrench

Clip Nuts Long Screws Short Screws

Ax 1

Bx 1 C Gx 1 x 1 Hx 1

There are two types of mounting kits, please choose

the mounting kit you want to use.

Install your fittings and tubes,

remember to use the bottom as

an outlet and top as an inlet.

1 2

3 4

Pump+Reservoir

Pacific PR32-D5

E Fx 4 x 4Dx 4

www.thermaltake.com

After adding the recommended

coolant, remember to fill the

reservoir to only 80% and leave

the fill port cap off. This will help

stabilize your internal loop

pressure

Connect the Pump power cable to

the 4pin Molex connecter.

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific PR32-D5
Kleur van het product:	Black, Transparent
Breedte:	74.8 mm
Diepte:	74.8 mm
Hoogte:	267 mm
Soort:	Waterkoelingreservoir
Aantal snelheden:	5
Aantal per verpakking:	1 stuk(s)
Spanning:	12 V
Rotatiesnelheid ( max):	4800 RPM
Rotatiesnelheid ( min):	1800 RPM
Geschikte locatie:	Videokaart
Stroomverbruik (typisch):	37 W
Ventilator diameter:	- mm
Fan connector:	4-pin