Thermaltake Pacific PR15 Handleiding

Thermaltake Hardwarekoeling Pacific PR15

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific PR15 (1 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

This product is intended for installation only by expert users. Please consult with a qualified technician for

installation. Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack

and fail ! Do not clean it using alcohol either !

Pacific

PR15

Pump+Reservoir

Installation Guide

Parts List

Pump+Reservoir

Clip

Nuts

Wrench

G1/4 Stop Plug

Wrench

Cable Ties 3-pin power

extension cable Velcro

Long Screws

Ax 2

Bx 4 Cx 4

Dx 1

Ex 1

Fx 1

Gx 4 Hx 4 Ix 4

This product comes with one mounting

kit, please follow the installation guide

to install it.

Install your fittings and tubes, remember

to use the bottom as an outlet and top

as an inlet.

After adding the recommended

coolant, remember to fill the

reservoir to only 80% and leave

the fill port cap off. This will help

stabilize your internal loop

pressure

1 2 3

Fill Port

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific PR15
Kleur van het product:	Black, Transparent
Breedte:	66.4 mm
Diepte:	81 mm
Hoogte:	179 mm
Maximale temperatuur (in bedrijf):	55 °C
Certificering:	Tt LCS
Materiaal:	Polymethylmethacrylate (PMMA), Polyoxymethylene (POM)
Connectie draad:	1/4 "
Koelmiddel:	Vloeistof
Coolant capaciteit:	0.2 l