Vango Sandon 500 Handleiding

Vango Tent Sandon 500

Lees hieronder de 📖 handleiding in het Nederlandse voor Vango Sandon 500 (1 pagina's) in de categorie Tent. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

IF YOU HAVE ANY PROBLEMS PLEASE CONTACT YOUR LOCAL RETAILER or

AMG Group Ltd., Kelburn Business Park, Port Glasgow, Scotland. PA14 6TD.

UK Consumer Hotline: 0844 811 0535 E-Mail: info@vango.co.uk

Calls to our Customer Hotline cost 5p per minute. Calls from mobile phones, cable networks or public payphones will generally cost more.

FLYSHEET FIRST PITCHING



 Assemble the 3 poles and lay them on the ground.



 Open out flysheet and position in required direction.



 Insert the diagonal poles through the pole sleeves on

the outside of the flysheet.



 Locate one end of each pole on one side of flysheet,

into the Ring & Pin system at the base of the tent.

Make sure poles locate into correct pin system (all

poles follow corresponding flysheet seams to pin

system).



 Push poles into an arch from opposite ends and locate

pole ends into corresponding metal pin to create the

dome.



 Insert front pole, push the pole into an arch and locate

the ends of the pole into the metal pin system.



 Tighten the tension adjusters located on the Ring & Pin

webbing.



 Start pegging out the main corners at one end of the

tent using the pin pegs provided.



 Pull the tent forward until taut and peg out the main

corners at the other end of the tent, again with the pin

pegs.



 Ensure the tent is in a straight line.



 Secure the tent using the pin pegs through the ring &

pin system (See fig 2).



 Peg out ALL guy lines, ensuring that they are in line

with the pole or seam they are attached to.

INNER ATTACHMENT



 Suspend the inner by attaching toggles on

the inner tent through rings on the inside of

the flysheet. Do the rear first and work

towards the front of the tent.



 Once fully attached, the inner can be left in

when pitching or striking the tent. However,

it is advisable to remove the inner when

striking the tent when wet.

Figure 1.

Figure 2.

Tent Pitching Instructions Sandon 500 –

Ring & Pin System

1. Locate one end of each pole onto the corresponding metal pin. The metal pin inserts into the hollow

metal ferrule on the end of each pole. (See Figure 1). Push the pole into a curve from the opposite

side, one at a time, and locate all pole ends onto the metal pins.

2. Peg the corners of the tent through the metal rings using pin-pegs. It is important to drive the peg

into the ground at a 45 degree angle to obtain the best grip. (See Figure 2).

King poles not included

Product specificaties

Merk:	Vango
Categorie:	Tent
Model:	Sandon 500

Heb je hulp nodig?

Als je hulp nodig hebt met Vango Sandon 500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Tent Vango

Vango Theta 300 Handleiding

17 November 2024

Vango Tour 200 Handleiding

17 November 2024

Vango Woburn 500 Handleiding

17 November 2024

Vango Woburn 400 Handleiding

17 November 2024

Vango Zenith 200 Handleiding

17 November 2024

Vango Zenith 100 Handleiding

17 November 2024

Vango Zephyr 300 Handleiding

17 November 2024

Vango Zeya DLX 500 Handleiding

17 November 2024

Vango Capri 400 Handleiding

17 November 2024

Vango Aether Air 600XL Handleiding

26 Maart 2024

Handleiding Tent

Nieuwste handleidingen voor Tent

Perel GASSK8N Handleiding

14 December 2024

Dometic Pico FTC2X2/1X1 Handleiding

5 December 2024

Hilleberg Anjan 3 GT Handleiding

25 November 2024

Hilleberg Helags 2 Handleiding

25 November 2024

Hilleberg Allak 2 Handleiding

25 November 2024

Hilleberg Keron 4 Handleiding

25 November 2024

Hilleberg Nallo 4 Handleiding

25 November 2024

Hilleberg Kaitum 3 GT Handleiding

25 November 2024

Hilleberg Nammatj 3 GT Handleiding

25 November 2024

Hilleberg Soulo BL Handleiding

25 November 2024