Supermicro BMB-CMM-002 Handleiding

Supermicro Controller BMB-CMM-002

Lees hieronder de đź“– handleiding in het Nederlandse voor Supermicro BMB-CMM-002 (64 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/64
Web-based Management Utility
For the SuperBlade® System
User’s Manual
Revison 1.0b
Web-based Management Utility User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and documentation
may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0b
Release Date: January 7, 2013
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
iii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the use of
Supermicro's Web-based Management Utility.
Manual Organization
Chapter 1: Introduction
The first chapter provides an introduction about the Web-based Management Utility.
Chapter 2: Blade System
This chapter covers the menu options and controls for the Blade System menu.
Chapter 3: Virtual Media
This chapter covers the menu options and controls for the Virtual Media menu.
Chapter 4: System Health
This chapter covers the menu options and controls for the System Health menu.
Chapter 5: User Management
This chapter covers the menu options and controls for the User Management menu.
Chapter 6: KVM Settings
This chapter covers the menu options and controls for the KVM Settings menu.
Chapter 7: Device Settings
This chapter covers the menu options and controls for the Device Settings menu.
Chapter 8: Maintenance
This chapter covers the menu options and controls for the Maintenance menu.
Chapter 8: Remote Console
This chapter covers the use of the Remote Console.

Product specificaties

Merk: Supermicro
Categorie: Controller
Model: BMB-CMM-002

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro BMB-CMM-002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Controller Supermicro

Supermicro

Supermicro AOC-SASLP-H8IR Handleiding

3 Juli 2023
Supermicro

Supermicro BMB-CMM-002 Handleiding

2 Juli 2023
Supermicro

Supermicro BTR-0012L-0000-LSI Handleiding

24 Juni 2023
Supermicro

Supermicro AOC-S3008L-L8I Handleiding

20 Juni 2023
Supermicro

Supermicro AOC-USASLP-L8I Handleiding

20 Juni 2023
Supermicro

Supermicro AOM-S3108-H8 Handleiding

17 Juni 2023
Supermicro

Supermicro AOC-SASLP-MV8 Handleiding

16 Juni 2023
Supermicro

Supermicro AOC-USAS2-L8E Handleiding

15 Juni 2023
Supermicro

Supermicro AOC-SAS2LP-H8IR Handleiding

15 Juni 2023
Supermicro

Supermicro AOC-S3108L-H8IR Handleiding

13 Juni 2023

Handleiding Controller

Nieuwste handleidingen voor Controller

IVT

IVT SCDplus Handleiding

11 December 2024
IVT

IVT MPPTplus+ 20A Handleiding

10 December 2024
GVM

GVM YK22 Handleiding

10 December 2024
Alfatron

Alfatron ALF-IPCON-HDMI Handleiding

10 December 2024
Harvia

Harvia Xenio C260 Handleiding

8 December 2024
Hotone

Hotone Patch Kommander Handleiding

7 December 2024
Hotone

Hotone Ampero Control Handleiding

7 December 2024
IFM

IFM AC1317 Handleiding

5 December 2024
Speed-Link

Speed-Link Thunderstrike Handleiding

2 December 2024
COLBOR

COLBOR CTRL1 Handleiding

29 November 2024