SIIG CE-MT1B12-S1 Handleiding

SIIG Wandsteun CE-MT1B12-S1

Lees hieronder de 📖 handleiding in het Nederlandse voor SIIG CE-MT1B12-S1 (8 pagina's) in de categorie Wandsteun. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Articulating LCD/TV Monitor

Mount - 10" to 27"

Installation Guide

04-0922A

IMPORTANT: If you don't understand the installation

instructions, please consult an installation specialist.

Caution

• Prior to installation of this product, the installation

instructions should be read and completely

understood. The installation instructions must be

read to prevent personal injury and property

damage. Keep these installation instructions in an

easily accessible location for future reference.

• The maximum load capacity is 33lbs (15kg). Use

with products exceeding the maximum load capacity

may cause serious injury. See apparatus instructions.

• Recommended mounting surfaces: wood stud and

solid-flat concrete. If the mount is to be installed on

any surface other than wood studs or solid concrete,

use suitable hardware (not included but

commercially available).

• Do not install on a structure that is prone to vibration,

movement or chance of impact. Failure to do so

could result in damage to the display and/or

damage to the mounting surface.

• Do not install near heater, fireplace, air conditioning,

in direct sunlight or any other heat producing source.

Failure to do so may result in damage to the display

and could increase the risk of fire.

• The wall structure must be capable of supporting at

least five (5) times the maximum load capacity as

indicated. If not, the wall must be reinforced.

• Proper installation procedure by yourself or a

qualified service technician, as outlined in the

installation instructions, must be adhered to. Failure

to do so could result in serious personal injury.

(x2) M6x60

bolt

(x2) M6

concrete anchor

(x4) M6

small washer

(x2) M6

large washer

(x4) M4x12

screw

(x4) M5x12

screw

(x4) M6x12

screw

Hardware Kit

A B

Tools Required: Electronic stud finder, #2 Phillips head

screw driver, drill, 1/8" drill bit (wood stud installation),

5/16" masonry drill bit (concrete/brick wall installation).

• When mounting to a wall that contains wood studs,

confirm the dead center of the wood stud prior to

installation, it is recommended that the wood studs

be a minimum of 16" apart (if applicable).

• It is recommended that two people perform the

installation. Injury and/or damage can result from

dropping or mishandling the display.

Product specificaties

Merk:	SIIG
Categorie:	Wandsteun
Model:	CE-MT1B12-S1
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	15 kg
Paneelmontage-interface:	50 x 50, 75 x 75, 100 x 100 mm
Duurzaamheidscertificaten:	RoHS
Horizontaal draaibaar:	-135 - 135 °
Pan bereik:	-90 - 90 °
Montage interface compatibiliteit (min):	50 x 50 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	1
Bereik kantelhoek:	-15 - 15 °
Maximale schermgrootte:	27 "
Minimale schermgrootte:	10 "