La Crosse WS8167 Handleiding

La Crosse Klok WS8167

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse WS8167 (15 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
868MHZ WEATHER WALL CLOCK
Instruction Manual
LCD2
display Battery cover
LCD1
display
Hanging holes
Foldable
stand
LCD3
display
FEATURES:
WEATHER WALL CLOCK:
Function keys
« Instant Transmission+» is the up and coming state-of-the-art new wireless transmission
technology, exclusively designed and developed by LA CROSSE TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
DCF-77 Radio controlled time with manual setting option
Time display: hour, minute, second
Alarm setting with snooze function
Calendar display
Weekday display (3 languages to choose from: German, English, and French)
Weather forecasting with 3 weather icons
17
Weather tendency indicator
Time zone setting
ºC or ºF temperature display selectable
Indoor temperature display
Wireless transmission at 868 MHz
Signal reception intervals at 4 seconds
Wall mount or freestanding
TEMPERATURE TRANSMITTER:
Remote transmission of outdoor temperature to weather station by 868
MHz signal
Wall mounting case
Mounting at a sheltered place. Avoid direct rain and sunshine
TO INSTALL AND REPLACE BATTERIES IN THE WEATHER WALL CLOCK
The weather wall clock uses 2 x AA, IEC LR6, 1.5V
batteries. To install and replace the batteries, please follow
the steps below:
1. Insert finger or other solid object in the space at the
bottom center of the battery compartment and lift up
to remove the cover.
2. Insert batteries observing the correct polarity (see
marking inside battery compartment).
3. Replace compartment cover.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Remove the cover.
2. Insert the batteries, observing the correct polarity (see marking inside
battery compartment).
3. Replace the battery cover on the unit.
18
SETTING UP:
1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and replace
batteries in the Temperature Transmitter” above).
2. Within 2 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather wall clock as
indicated above (see "To install and replace batteries in the Weather wall clock“ above).
3. Once the batteries are in place, all segments of the LCD will light up briefly and a brief bip
sound will be hear. Then the indoor and outdoor temperature - -.-°C, the time as 0:00, the date
as 1/1, and weekday will be displayed.
4. Do not press any buttons for 10 minutes
5. The Weather wall clock will start receiving data from the transmitter. The remote temperature
will then be displayed on the Weather wall clock. If the outdoor temperature is not displayed 60
seconds after inserting the batteries into the receiver, all batteries are needed to be removed
and wait for at least 1 minute for reset from step 1.
6. The DCF time code reception will automatically start. This takes typically between 3 - 5 minutes
in good conditions. This time period is an excellent opportunity to locate the transmitter in
suitable location outdoors. In order to ensure sufficient 868MHz transmission however, this
should under good conditions be no more than 100 meters from where the Weather wall clock
will be finally positioned (see notes on “Positioning” and “868MHz Reception”).
7. If after 10 minutes the DCF time has not been received, use the SET key to manually enter the
set mode and change either the time or date in order to activate the DCF reception. The clock
will then automatically attempt to receive the DCF time every full hour each day. When this is
successful, the received time will override the manually set time. The date is also updated with
the received time (Please refers to notes on “DCF Radio controlled time” and “Manual time
setting”).
8. The indoor temperature will be measured after the DCF reception.
Note:
In the event of changing batteries of the unit ensure that the batteries do not spring free from the
contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise start
up and transmission problems may occur.
FUNCTION KEYS
The weather wall clock has four easy to use keys:
SET key : To enter into the set mode for the following functions: L time zone, language,
manual time setting, year, month, day, weekday, and ºC or ºF temperature display
+ key : To toggle between the weekday/date, alarm time, or second display
To change the values in manual set mode
19


Product specificaties

Merk: La Crosse
Categorie: Klok
Model: WS8167

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse WS8167 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klok La Crosse

Handleiding Klok

Nieuwste handleidingen voor Klok

TFA

TFA 60.3050.02 Handleiding

7 December 2024
TFA

TFA 60.3519.02 Handleiding

7 December 2024
TFA

TFA 60.3528.02 Handleiding

7 December 2024
TFA

TFA 60.4507 Handleiding

7 December 2024
TFA

TFA 60.3541.09 Handleiding

7 December 2024
TFA

TFA 60.3521.02 Handleiding

7 December 2024
TFA

TFA 98.1097 Handleiding

7 December 2024
TFA

TFA 60.3036.01 Handleiding

7 December 2024
TFA

TFA 60.4506 Handleiding

7 December 2024
TFA

TFA 60.3028.54 Handleiding

7 December 2024