La Crosse WS6158IT Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse WS6158IT (16 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 87 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
19
LCD2
display
Battery cover
LCD1
display
Hanging holes
Foldable stand
WEATHER WALL CLOCK
Instruction Manual
FEATURES:
WEATHER WALL CLOCK:
• DCF-77 Radio controlled time with manual setting option
• 24 hour time display
• Time display: hour, minute, second
• Alarm setting with snooze function
• Calendar display
• Weekday display (3 languages to choose from: German, English, and French)
Function keys
« Instant Transmission+» is the up and coming state-of-the-art new wireless
transmission technology, exclusively designed and developed by LA CROSSE
TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
20
• Weather forecasting with 3 weather icons
• Weather tendency indicator
• Time zone setting
• ºC or ºF temperature display selectable
• Indoor temperature display
• Outdoor temperature display via 868MHz transmission
• Low battery indicator
• Signal reception intervals at 4-second
• Wall mount or freestanding
OUTDOOR TEMPERATURE TRANSMITTER:
• Remote transmission of outdoor temperature to Weather Station
by 868 MHz
• Wall mounting case
• Mounting at a sheltered place. Avoid direct rain and sunshine
TO INSTALL AND REPLACE BATTERIES IN THE WEATHER WALL CLOCK
The weather wall clock uses 2 x AA, IEC LR6, 1.5V
batteries. To install and replace the batteries, please
follow the steps below:
1. Insert finger or other solid object in the space at
the bottom center of the battery compartment and
lift up to remove the cover.
2. Insert batteries observing the correct polarity (see
marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
21
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and
replace the batteries, please follow the steps below:
1. Remove the cover.
2. Insert the batteries, observing the correct polarity (see marking
inside battery compartment).
3. Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid
using rechargable batteries.
SETTING UP:
1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and
replace batteries in the Temperature Transmitter” above).
2. Within 3 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather wall clock as
indicated above (see "To install and replace batteries in the Weather wall clock“
above).
3. Once the batteries are in place, all segments of the LCD will light up briefly and a brief
beep sound will be hear. Then the indoor temperature “OF” and outdoor temperature - - -,
the time as 0:00, the date as 1/1, and weekday will be displayed.
4. Do not press any buttons for 10 minutes
5. The Weather wall clock will start receiving data from the transmitter. The remote
temperature will then be displayed on the Weather wall clock. If the outdoor temperature
is not displayed 90 seconds after inserting the batteries into the receiver, all batteries are
needed to be removed and wait for at least 1 minute for reset from step 1.
6. The DCF time code reception will automatically start. This takes typically between 3 - 5
minutes in good conditions. This time period is an excellent opportunity to locate the
transmitter in suitable location outdoors. In order to ensure sufficient 868MHz
transmission however, this should under good conditions be no more than 100 meters
from where the Weather wall clock will be finally positioned (see notes on “Positioning”
and “868MHz Reception”).
7. If after 10 minutes the DCF time has not been received, use the SET key to enter into the
set mode and change either the time or date in order to activate the DCF reception. The
clock will then automatically attempt to receive the DCF time. When this is successful,
Product specificaties
| Merk: | La Crosse |
| Categorie: | Klok |
| Model: | WS6158IT |
Heb je hulp nodig?
Als je hulp nodig hebt met La Crosse WS6158IT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Klok La Crosse
14 April 2023
14 April 2023
14 April 2023
14 April 2023
Handleiding Klok
- Klok Braun
- Klok IKEA
- Klok Casio
- Klok Fysic
- Klok Xiron
- Klok Accusplit
- Klok Ade
- Klok Alecto
- Klok Amplicom
- Klok Ascot
- Klok Audiovox
- Klok Auriol
- Klok Balance
- Klok Balance Time
- Klok BBrain
- Klok Dexford
- Klok Digi-tech
- Klok Ecom
- Klok Elro
- Klok Eurochron
- Klok Fisher Price
- Klok Geemarc
- Klok Gingko
- Klok Gira
- Klok Global Tronics
- Klok GlobalTronics
- Klok Glunz
- Klok Hager
- Klok Hama
- Klok Hermle
- Klok IHome
- Klok Irox
- Klok Karlsson
- Klok Kogan
- Klok Konig
- Klok Krontaler
- Klok Lenovo
- Klok Lexon
- Klok Livoo
- Klok Lorus
- Klok Lydion
- Klok Marquant
- Klok Mebus
- Klok Mondaine
- Klok Muse
- Klok Nedis
- Klok Perel
- Klok Profile
- Klok Ranex
- Klok RCA
- Klok Salter
- Klok Sempre
- Klok Taylor
- Klok Techno Line
- Klok Technoline
- Klok TFA
- Klok Tronic
- Klok United Office
- Klok Velleman
- Klok Ventus
- Klok Vitek
- Klok Weinberger
- Klok Jacob Jensen
- Klok Jung
- Klok Oregon Scientific
- Klok McIntosh
- Klok Camry
- Klok ECG
- Klok EMOS
- Klok Cresta
- Klok Citizen
- Klok Trevi
- Klok Zuiver
- Klok Chacon
- Klok Valcom
- Klok Dormakaba
- Klok AcuRite
- Klok ART
- Klok La Crosse Technology
- Klok AV:link
- Klok Elation
- Klok ASA
- Klok TFA Dostmann
- Klok Antelope Audio
- Klok Equity
- Klok DB Technologies
- Klok Focus Electrics
- Klok Pyramid
- Klok CyberData Systems
- Klok Electronics International
- Klok Antelope
- Klok Bearware
Nieuwste handleidingen voor Klok
3 December 2024
3 December 2024
3 December 2024
3 December 2024
3 December 2024
2 December 2024
20 November 2024
19 November 2024
19 November 2024
19 November 2024