FeiyuTech MG Lite Handleiding

FeiyuTech Niet gecategoriseerd MG Lite

Lees hieronder de 📖 handleiding in het Nederlandse voor FeiyuTech MG Lite (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

[2] Motor knob ring of tilting

[3] Cross arm

[4] Rolling axis

[5] Motor knob ring of rolling

[6] Vertical arm [13] Handle

[12] Socket connector

[11] Function button

[9] Indicator light

[10] Joystick

[16] Thumb screw for ﬁxing lens

[15] USB function interface

[14] 1/4 inch screw hole [21] Charger

[20] USB cable（micro port）

[19] Thumb screw

[17] Adjusting clamping plate

[18] Adapter(Clamping plate)

[22] Batteries (Type: 18650)

[8] Panning axis

[7] Motor knob ring of panning

[1] Tilting axis

1. Product Overview

MG Lite is one kind of 3-axis handheld gimbal especially for mirrorless cameras. Simple and clean design

integrated strong operation function, easy to switch among more using ways.

Panning / Tilting / Rolling 3-axis 360 degrees coverage, giving you ultimate experience while using the

MG Lite for shooting.

Portable

Installation

Exte nded

Installation

* Default mode is handheld

* This product does not contain cameras

and camera equipment category

The showing camera is only for reference.

Optional Accessories

[16]

[20] [21] [22][19]

Portable handle

Package List

Product model

MG Lite gimbal

Handle

Adjusting clamping plate

Batteries (type: )18650

Charger

Quantity

User manual

Thumb screw

Thumb screw for fixing lens

Product model

Quantity

USB cable (micro port)

Warranty card

M4 screw

M22

Us e r M an u a l

GuiLin FeiYu Technology Incorporated Company

3-Axis Gimbal for Mirrorless Camera

[16]

[18] [17]

[13]

[3]

[6]

Rolling

360°

Tilting

360°

Panning 360°Panning 360°

[15]

[1]

[2]

[13]

[4]

[5]

[8]

[7]

[6]

[9]

[4]

[5]

[3]

[8]

[7]

[6]

[10]

[11]

[1]

[12]

[14]

[13]

[2]

Camera

B2B2

5Power on / oﬀ

Thumb

screw

Tilting

axis

( 1 ) Please mount the adjusting clamping plate, camera lens,memory card, etc. and then remove

the lens cover before the balance adjustment.

( 2 ) Simply loosen the Motor knob ring, the adapter or cross arm or vertical arm to move without

all wring out.

3. Balance

Adjustment

STEP 1 Balance adjustment

of the tilting axis

Mount the camera on the adjusting

clamping plate, ﬁx the tilting, rolling

position, and keep it at the horizon

level, and turn the lens down.

Observe the camera status.

If the camera leans to front or back, then

loosen the motor knob ring(shown at

right), and adjust the camera to the

opposite position, until the camera can

mount properly

As shown, if the camera is tilted toward A1, the ﬁxed

plate live A2 direction, if tilted toward B1, the

adapter should be live B2 direction.

As shown, if the camera is tilted toward A1, the camera live

A2 direction, if tilted toward B1, the camera should be live

B2 direction.

Be sure to tighten the Motor knob ring after the

adjustment (shown at right).

Adjust the center of gravity of the camera’s horizon

position in tilting axis, after the adjustment of the center of

gravity in vertical position.

The screws on the bottom of the adapter in a relaxed state.

Fix the tilting, rolling position, and keep it at the horizon level. Make

the camera lens forward. And observe the camera status.

If the camera leans to front or back, then move the camera to the

opposite position , until the camera can mount properly.

After the adjustment tighten the screws on the adapter

and the lens retaining ring.

（1） Adjust the center of gravity of the

camera’s vertical position in tilting axis

（2）

Thumb screw

The bottom

of adapter

Camera must close to the tiltingCamera must close to the tilting

2. Installation Attention: Please complete the following instructions before power on the gimbal

18650 18650

Installation of the camera

Camera balance adjustment

Installation of adjusting clamping plate

Adjusting clamping plate light slip along the slideway to the suitable position.

If use a long lens, please install the thumb screw for ﬁxing lens[16] after

installing the adjusting clamping plate.

Correctly place the camera to the adjusting

clamping plate, ﬁxing it by the thumb screw[19]

trough the screw holes on the bottom of the

adjusting clamping plate. Adjust the adjusting

clamping plate to make the camera close to

the tilting motor, ﬁxing the adjusting clamping

plate by the thumb screw [19]. If a long lens,

the long lens close to the thumb screw for

ﬁxing lens [16].

In order to achieve the desired eﬀect of

the gimbal, the ﬁrst time to use or replace

the camera / lens, or change the camera

position, weight, size, appearance, please

adjust the balance.

Adjusting clamping plate

Thumb screw

for ﬁxing lens Adapter

1Insert the batteries

Remove the handle, insert

2 pcs 18650 batteries and

tighten the screw.

Warm tip: If the ﬁrst time to use or replace the

camera / lens, or change the camera position,

weight, size, appearance, it is only ﬁxed,

without tightening the middle screw too tight,

in order to facilitate the balance after

adjustment.

Please refer to the "Balance Adjustment"

section.

Tilting axis

For long lens camera,

please install the camera

closely onto the thumb screw

For long lens camera,

please install the camera

closely onto the thumb screw

Power on： Long press Function Button and

release it until the green light is on.

Power oﬀ：Long press Function Botton and

release it until the green light changes from

quick ﬂashing to constant.

If the battery power is too low, the red light

will ﬂash 3 times every 5 seconds.

Please shut down the gimbal in time, and recharge

or replace the battery.

Cross armCross arm

Motor knob ringMotor knob ring

AdapterAdapter

Camera

Tips: Just need loose the

motor knob ring without all

wring out when adjustment

T=Tight L=Loose

A2A2

B2B2

As the stabilizer comes with boot

self-test function, such as the

stabilizer due to no load, the

balance adjustment is less than

ideal, or due to the intensity

adjustment does not ﬁt and other

reasons cause the stabilizer

vibration is too large, the gimbal

will automatically enter the

Standby mode.

Attention

STEP 2 Balance adjustment of the rolling axis

Adjust the center of gravity of the camera’s horizon position in rolling axis, after the adjustment

of the center of gravity in tilting axis.

Fix rolling position manually and keep the camera at the horizon level, leave hold of it and observe the

camera status.

If the camera leans to left or rihgt, then loosen the motor knob ring (shown at bellow), and adjust the cross

arm to the opposite position of the cross arm, until the camera keep the current position after adjustment.

c. Be sure to tighten the motor knob ring after the adjustment (shown at bellow）.

A1 B1

Cross armCross arm

B2B2

A2A2

Tips: Just need loose the

motor knob ring without all

wring out when adjustment

Tips: Just need loose the

motor knob ring without all

wring out when adjustment

4. Operation

STEP 3 Balance adjustment of the panning axis

Adjust balance of the panning after the balance adjustment of the tilting and rolling.

Keep the socket connector of the gimbal parallel to the

ground, refer the right picture:leave hold of it and

observe the camera status.

c. Be sure to tighten the Motor knob ring after the adjustment (shown at bellow).

If the camera leaning left or right, loosen the Motor

knob ring (shown at bellow）, adjust the vertical arm

to leaning opposite direction,until the camera keep

the current position after adjustment.

Horizontal

Socket connector

Joystick Camera lens

Down

Left

Down

Left

RightRight

Explanation of joystick control

Realize other functions

Switch the working mode

Power on / oﬀ

Identify the current mode of the

gimbal by the indicator lights

Function Button

As shown, if the camera is tilted toward A1, the vertical arm

live A2 direction, if tilted toward B1, the vertical arm should

be live B2 direction.

A1A1 B1

Vertical armVertical arm

B2B2

A2A2

Indicator lightIndicator light

LED status Mode / Status

Blue light ﬂashes once

Blue light ﬂashes twice

Panning mode

Panning and Tilting mode

Lock mode / Initialize the gimbalBlue light constant on

Blue light keeps ﬂashing Initialization failure / Malfunction

Blue light ﬂashes for three times Standby

Low battery （please charge or change the batteries）Red light ﬂashes three times

Red light keeps ﬂashing Entering standby / Entering power oﬀ

Explanation of LED indicator status

Reset the tilting axis of the gimbal to initial orientation and initial

mode

Operation

Double tap

Single tap

Function

Explanation

Panning mode / Lock mode

Panning and Tilting mode

Triple tap

Under panning and tilting mode, single tap to switch to lock mode

Rotate 180°in horizontal Make the camera lens rotate 180 °

Single tap to switch between panning mode and lock mode

Quadruple tap Reset

Single tap again to awake the gimbal, or triple tap to initialize the

gimbal

Long press

for 1 second Standby

Long press

for 3 seconds Power oﬀ

Operating Instructions of Function Button

Working Modes

Other Functions

Panning Mode

The camera can move to left or right smoothly along with the handheld moving.

The tilting and rolling directions ﬁxed.

Panning and Tilting Mode

The camera can move to left or right and tilt up and down smoothly along with the handheld

moving. The rolling directions ﬁxed.

Lock Mode

The camera stays in its current orientation. The panning, tilting and rolling direction are all ﬁxed.

Reset

Reset the tilting axis of the gimbal to initial orientation and initial mode.

Standby

In standby model, keep the gimbal in power-up state, the motor stops working, the indicator

light ﬂashes for three times, and single tap again to wake the gimbal.

As shown, if the camera is tilted toward A1, move the cross arm to A2 direction, if tilted toward B1,

move the cross arm to B2 direction.

STEP 4 Camera adaptation parameter adjustment

Joystick down

Decrease the

parameter

Increase the

parameter

Joystick up

（1）

（2）

（3）

（4）

After power on, You can adjust the adaptation parameter of the corresponding axis while operation the

function corresponding keys（as shown below）.the led will keep ﬂashing in the adjust mode.

If the panning axis / rolling roll / tilting axis from side to side, then move up the joystick to increase the

adaptation parameter.

If the motor has felt the feeling of holding the handle, then move down the joystick to decrease the

adaptation parameter.

After the shock rocker disappeared please release button and click Save function parameters.

After ﬁnishing the stabilizer balance adjustment , turn on the gimbal for a testing, please refer to point 5

in "Installation" chapter.

If there is a slight vibration happen on the panning / rolling / tilting axis after power on the gimbal, it

means the adaptation parameters needs to be adjusted.

Steps:

Function Button Adjusted Axis

Tap button for ﬁve times

Tap button for six times

adjust for panning axis

adjust for rolling axis

Tap button for seven times adjust for tilting axis

6. Firmware Upgrade

18650

Charger

USB Cable

Micro port

How to Charge

5. Gimbal Horizontal Angle Adjustment

The horizontal angle needs to be adjusted whenever the following situations happen to the gimbal:

（1） The tilt angle is not leveled with the horizontal surface.

（2） The roll angle is not parallel to the horizontal surface.

（3） Under lock mode, the panning angle drifts.

( Initialize the gimbal)

When the initialization failed, the LED indicator will ﬂash quickly, repeat step (2) to reinitialize.

7. Parameters

887g (Not including the accessories of batteries,camera,camera lens and ect.)

Panning Increments 3°/s ~ 150°/s

Adaption

Weight

Sony NEX-5N/NEX-7 and other N-series, SONY A7RII / ILCE-7R / ILCE-5100, Panasonic LUMIX GH4,

Canon 5D Mark III (with standard lens), and other cameras with similar dimensions with weight less

1630g（The camera weight including the accessories of lens and ect.）

Usage Time 6 Hours

Tilting Increments 2°/s ~ 75°/s

Tilting / Rolling / Panning 360°

5V USB

Power Adapter

(Equipped by users)

Prohibit any user for any illegal purpose.

Users will be responsible for all behaviors of purchase and

use products.

The Company assumes no liability for any risks related to

or resulting from the debug and use of this product

(including the direct, indirect or third-party losses).

For any unknown sources of using, we will not be at any

services.

You can get the latest user manual from the oﬃcial

website: www.feiyu-tech.com

Feiyu Tech reserves the right to amend this manual and

the terms and conditions of use the gimbal at any time.

ATTENTION

D I S C L AI M E R

Please correctly assemble the gimbal in accordance with the diagram.

Please install the camera, complete the installation and balance

adjustment before power on the gimbal.

Please charge the battery with the standard charger.

When the gimbal is not in use or placed on the table, please ensure

it is powered oﬀ.

Please visit the oﬃcial website of Feiyu Tech

to get related information: www.feiyu-tech.com

Support email: service@feiyu-tech.com

Connect the Micro-USB port of the USB cable with the charger,

and the USB port with 5V USB power adapter.

（1）

（2）

In boot-up state, long press the Function Botton until the red light ﬂashes quickly to enter standby

status, the blue light will ﬂash 3 times periodically.

Lay the gimbal on a static ﬂat surface and triple tap the Function Botton. Initialization is successful

when the blue light changes from constant on to ﬂashing 3 times periodically.

USB Cable

micro port

Function

Interface

Function

Interface

Upgrade........

Upgrade steps

(1)

Connect the USB cable with micro port as the above picture.(2)

(3)

Please visit the oﬃcial website www.feiyu-tech.com to download the relevant programs for

upgrading, including USB drive program, ﬁrmware upgrade software and product ﬁrmware,

and install the relevant software, decompress the ﬁrmware ﬁles for standby application.

Please upgrade the relevant ﬁrmware according to the operation instructions of ﬁrmware

upgrade software.

Adjusting steps:

2016.11

V 1.46

Joystick

down

Joystick up

Product specificaties

Merk:	FeiyuTech
Categorie:	Niet gecategoriseerd
Model:	MG Lite

Heb je hulp nodig?

Als je hulp nodig hebt met FeiyuTech MG Lite stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd FeiyuTech

FeiyuTech 3 Axis Handheld Gimbal Handleiding

19 November 2024

FeiyuTech AK4000 Handleiding

19 November 2024

FeiyuTech WG Mini Handleiding

19 November 2024

FeiyuTech G4 Plus Handleiding

19 November 2024

FeiyuTech MG Lite Handleiding

19 Maart 2024

FeiyuTech G4S Handleiding

19 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Peerless-AV ACC-MB3875 Handleiding

19 November 2024

Peerless-AV KIPC2546-EUK Handleiding

19 November 2024

Peerless-AV KIL655-EUK Handleiding

19 November 2024

Peerless-AV KIL755-EUK Handleiding

19 November 2024

Peerless-AV KIL749-EUK Handleiding

19 November 2024

Peerless-AV ACC-MB2200 Handleiding

19 November 2024

Supermicro A2SAN-L-WOHS Handleiding

19 November 2024

Supermicro A+ SuperWorkstation 5014A-TT Handleiding

19 November 2024

Olimpia Splendid Sitali CX 120 Handleiding

19 November 2024

Olimpia Splendid Sitali SFE100 S1 Handleiding

19 November 2024