Elba ETM-E3320 Handleiding
Lees hieronder de π handleiding in het Nederlandse voor Elba ETM-E3320 (1 pagina's) in de categorie Kraan. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
A Tap Body
B Rubber O-ring
C Sink top or Work top
D Rubber O-washer
E Metal O-washer
F Threaded fixing bushing
G Flexi bose
H Rubber O-ring for flexi hose
1. An opening hole of 35mm diameter is required on sink top or work top for installation of tap.
2. Slide the rubber O-ring (B) over the threaded tube and up to the base of tap (A).
3. Insert the threaded tube through the hole of sink top or work top (C) and position the tap properly.
4. Slide the rubber O-washer (D) and metal O-washer (E) over the threaded tube and up to the underside of
sink top or work top (C).
5. Screw the fixing bushing (F) up to the metal O-washer (E).
6. Connect the flexi hoses (G) to the extension tube on one end and the hot or cold water supply on the other
end. Please ensure that the hot water supply goes through the hot flexi hose while the cold water supply goes
through the cold flexi hose.
(C)
ETM-E3820
βBefore installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 CΛ Λ
-Water pressure between 0.05MPa β 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure diο¬erences between hot and cold water
supply
βFlush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
βInspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
βUse thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETM-E3320 ETM-E2920 ETM-E3920
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Mixer Tap
Product specificaties
| Merk: | Elba |
| Categorie: | Kraan |
| Model: | ETM-E3320 |
Heb je hulp nodig?
Als je hulp nodig hebt met Elba ETM-E3320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kraan Elba
19 Augustus 2024
19 Augustus 2024
19 Augustus 2024
19 Augustus 2024
19 Augustus 2024
Handleiding Kraan
- Kraan IKEA
- Kraan Etna
- Kraan Inventum
- Kraan Brita
- Kraan Delta
- Kraan Ernesto
- Kraan Franke
- Kraan Grohe
- Kraan Hansgrohe
- Kraan Hotto
- Kraan KitchenAid
- Kraan Livarno
- Kraan Lynx
- Kraan Miomare
- Kraan Quooker
- Kraan Smeg
- Kraan Stiebel Eltron
- Kraan Teka
- Kraan Blanco
- Kraan Caple
- Kraan CDA
- Kraan Curaqua
- Kraan SchΓΌtte
- Kraan Lamona
- Kraan Nodor
- Kraan Empire
- Kraan Brauer
- Kraan Elkay
- Kraan Oras
- Kraan Berg
- Kraan Mizzo
- Kraan ZLine
- Kraan Moen
- Kraan Mueller
- Kraan Aloni
- Kraan WillieJan
- Kraan Everpure
- Kraan Sani-Lav
- Kraan Fala
- Kraan Neo
- Kraan Lomazoo
- Kraan American Standard
- Kraan Livarno Lux
- Kraan Billi
- Kraan SaniSupreme
- Kraan Deante
- Kraan Omnires
- Kraan Vola
- Kraan Zip
- Kraan The Galley
- Kraan Viidako
- Kraan Waltec
- Kraan Gessi
- Kraan Sussex
- Kraan Fantini
- Kraan Oliveri
- Kraan Rogerseller
- Kraan Axor
- Kraan Graff
Nieuwste handleidingen voor Kraan
6 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024