Elba ETC-E2700 Handleiding

Elba Kraan ETC-E2700

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Elba ETC-E2700 (1 pagina's) in de categorie Kraan. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
1. Install the intake (A) on the wall.
2. Put the tape(C) around the screw threaded tube, cover the rosette (B) and screw into pipeline.
3. Connect water and check if the screw has been sealed tightly.
pipeline
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure di erences between hot and cold water ff
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETC-E2700
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Cold Water Tap


Product specificaties

Merk: Elba
Categorie: Kraan
Model: ETC-E2700

Heb je hulp nodig?

Als je hulp nodig hebt met Elba ETC-E2700 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kraan Elba

Elba

Elba ETC-E2700 Handleiding

19 Augustus 2024
Elba

Elba ETC-E3400 Handleiding

19 Augustus 2024
Elba

Elba ETM-E3690P Handleiding

19 Augustus 2024
Elba

Elba ETM-E3320 Handleiding

19 Augustus 2024
Elba

Elba ETM-E3920 Handleiding

19 Augustus 2024

Handleiding Kraan

Nieuwste handleidingen voor Kraan