Adastra RM240S Handleiding

Adastra Mengpaneel RM240S

Lees hieronder de 📖 handleiding in het Nederlandse voor Adastra RM240S (8 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

RM-SERIES

Rackmount 100V mixer-amplifiers with Bluetooth®

Item ref: 213UK, 953.214UK, 953.215 , 953.216UK 953. UK

User Manual

Version 3.1

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

RM Series User Manual

Introduction

Thank you for choosing the Adastra -series rackmount 100V amplifier as part of your public address system. This RM

amplifier is designed to offer high quality, dependable service for mobile and installed systems. Please read this manual

fully and follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit.

SAFETY NOTICE

1. Prior to use, read through this manual

2. Keep the manual in good condition

3. Pay attention to safety warnings

4. Observe all operating requirements

5. Do not use the device near water or wet areas

6. For cleaning, only use a lint-free, dry cloth

7. Install according to the specifications

8. Place away from heat sources or heating appliances

9. Use mains lead provided and avoid damage to cable or connectors

10. Unplug power from mains during stormy weather or if unused for long periods

11. In case of malfunction, water ingress or other damage, consult qualified service personnel

12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing

13. Please pay attention to warning symbols during transit and placement

14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel

15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection

16. Ensure correct operation of the mains switch

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.

If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before

further use. Avoid impact, extreme pressure or heavy vibration to the case

No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

Safety

• Check for correct mains voltage and condition of IEC lead before connecting to power outlet

• Use double insulated speaker wire with adequate current rating for 100V speaker connections

• Only use one type of output i.e. 8 or 100V do not mix or combine these outputs on a single zone or output – Ω –

• Do not connect 8 speakers to the 100V terminal or 100V speakers to the 8 terminal Ω Ω

• Do not allow any foreign objects to enter the case or through the ventilation grilles

Placement

• Keep out of direct sunlight and away from heat sources

• Keep away from damp or dusty environments

• For rack-mounting, use the rack ears provided and ensure adequate support for the weight of the amplifier

• Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier

• Ensure adequate access to controls and connections

Cleaning

• Use a soft cloth with a neutral detergent to clean the casing as required

• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups

• Do not use strong solvents for cleaning the unit

RM Series User Manual

Front panel

Rear panel

DIP switches (24)

MIC 1 channel has an option for +20V phantom power for condenser microphones and

paging microphones with chimes.

MIC 1 also has the option of VOX control, which attenuates the line input channels 4 and 5

by -40dB when MIC 1 signal is detected and returns them to normal when MIC 1 signal is

silent.

MIC/LINE 2 (23) and MIC/LINE 3 (22) inputs can be set to MIC (up position) or LINE (down position)

sensitivity to suit the type of input being used. Be sure to make these DIP switch settings when the amplifier

is switched off. Making any changes when the amplifier is powered up may cause loud noises which can

damage the speakers.

USB/SD/FM/BT media player

BASS EQ control

MIC 1 volume control

TREBLE EQ control

MIC/LINE 2 volume control

MASTER volume control

MIC/LINE 3 volume control

10.

VU level meter

LINE 4 volume control

11.

POWER on/off switch

LN5/USB volume control

12.

Speaker zone selector buttons (RM240S/ 360S only) RM

13.

Mains voltage switch

21.

LINE 4 input (RCA)

14.

IEC mains inlet & fuse holder

22.

MIC/LINE 3 input (6.3mm jack)

15.

DC power terminals

23.

MIC/LINE 2 input (6.3mm jack)

16.

COM speaker terminal

24.

DIP switches (see DIP switches section below)

17.

8 speaker terminal Ω

25.

MIC 1 input (balanced XLR)

18.

100V speaker terminals (1 zone for RM60 / RM120)

26.

24V Mute contacts

19.

LINE OUT connectors (RCA)

27.

Antenna connection for FM tuner

20.

LINE 5 input (RCA)

Product specificaties

Merk:	Adastra
Categorie:	Mengpaneel
Model:	RM240S
Kleur van het product:	Zwart
Gewicht:	9620 g
Breedte:	433 mm
Diepte:	320 mm
Hoogte:	89 mm
Breedte verpakking:	535 mm
Diepte verpakking:	390 mm
Hoogte verpakking:	133 mm
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Bluetooth-versie:	5.0
USB-poort:	Ja
USB-connectortype:	USB Type-A
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Microfoon, line-in ingang:	Ja
Versterker output power:	240 W
Videomogelijkheid:	Nee
Audio-ingangen:	Mic XLR, 2 x mic/line jack, 2 x RCA line
Equalizer-instellingen:	Ja
Rack-montage:	Ja
Aantal kanalen:	5 kanalen
Totale harmonische vervorming (THD):	1 procent
XLR in:	Ja
Rackcapaciteit:	2U
AC-ingangsspanning:	100 -240 V
AC-ingangsfrequentie:	50/60 Hz
Aantal microfooningangen:	5
Synchronisatie ingangsimpedantie:	1000 Ohm
Line inputs (RCA):	2
Versterker inclusief:	Ja
Output impedance:	8 Ohm
Spook power:	20 V