Bogen MAX1R Handleiding

Bogen Mengpaneel MAX1R

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen MAX1R (2 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
MAX1R
Mono Aux Input
Module
Features
• Gain/Trim control
• Bass and treble
• Audio Gating with threshold and duration adjustments
• Variable signal ducking when muted or gated
• Fade back from mute level
• 4 levels of available priority
• Can be muted from higher priority modules
• Can mute lower priority modules
© 2005 Bogen Communications, Inc.
54-2053-01C 0911
Specifications subject to change without notice.
www.bogen.com
Block Diagram
The Bogen MAX1R Mono Aux Input Module is warranted to be free from defects in material and workmanship for
three (3) years from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with
normal installation and use, becomes defective (as confirmed by Bogen upon inspection) during the applicable warranty
period, will be repaired or replaced by Bogen, at Bogen’s option, provided the product is shipped insured and prepaid to:
Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. Repaired or replacement product will be
returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse,
misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any
manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHAS-
ER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW.
Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based
upon warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE
LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS
OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR
SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
OR LOSSES. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from State to State.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department – same address as
above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by
the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner's
expense. All returns require a Return Authorization number. For most efficient warranty or repair service, please include
a description of the failure.
12/2008
Gain
Provides control over the level of input signal that can be applied to
the internal signal buses of the main unit. Allows a way to balance
the input levels of various devices so that the main unit controls can
be set to relatively uniform or optimum levels.
Bass & Treble (Treb & Bass)
Provides separate control of Bass and Treble cut and boost. The Bass
control affects frequencies below 100 Hz and Treble affects frequencies
above 8 kHz. Clockwise rotation provides boost; counterclockwise rota-
tion provides cut. Center position provides no affect.
Gate - Threshold (Thresh)
Controls the minimum necessary input signal level to turn on the
moduleʼs output and apply mute signal to the main unit's buses.
Clockwise rotation increases the necessary signal level required to
produce output and mute lower priority modules.
Gate - Duration (Dur)
Controls the amount of time the output and mute signal of the module
remains applied to the main unitʼs buses after the input signal falls
below the required minimum signal level (set by the threshold control).
Ducking (Duck)
Controls the level of the output signal from the module when it has
been requested to mute/gate itsʼ output. The range is adjustable from
no reduction in level to full muting of the output signal.
Connections
Uses a standard RCA connector to make connections to the moduleʼs
input. The inputs are quasi-balanced to reduce the chance of ground
loops while still being compatible with unbalanced signal sources.
Module Installation
1. Turn off all power to the unit.
2. Make all necessary jumper selections.
3. Position module in front of desired module bay
opening, making sure that the module is right-
side up.
4. Slide module on to card guide rails. Make sure
that both the top and bottom guides are
engaged.
5. Push the module in to the bay until the face-
plate contacts the unitʼs chassis.
6. Use the two screws included to secure the
module to the unit.
WARNING:
Turn off power to unit and make all jumper
selections before installing module in unit.
Jumper Selections
Priority Level*
This module can respond to 4 different levels of
priority. Priority 1 is the highest priority. It mutes
modules with lower priorities and is never muted.
Priority 2 can be muted by Priority 1 modules
and mutes modules set for 3 or 4. Priority 3 is
muted by either Priority 1 or 2 modules and
mutes Priority 4 modules. Priority 4 modules are
muted by all higher priority modules.
*
The number of priority levels available is determined
by the amplifier the modules are used in.
Bus Assignment
This module can be set to operate so that the
mono signal can be sent to the main unitʼs A bus,
B bus, or both buses.
Gating
Gating (turning off) of the module's output when
insufficient audio is present at the input can be
disabled. Detection of audio for the purpose of
muting lower priority modules is always active
regardless of this jumper setting.

Product specificaties

Merk: Bogen
Categorie: Mengpaneel
Model: MAX1R

Heb je hulp nodig?

Als je hulp nodig hebt met Bogen MAX1R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Mengpaneel Bogen

Bogen

Bogen TEL1S Handleiding

28 Februari 2025
Bogen

Bogen LMM1S Handleiding

28 Februari 2025
Bogen

Bogen LMR1S Handleiding

28 Februari 2025
Bogen

Bogen MAX1R Handleiding

28 Februari 2025
Bogen

Bogen MIC2X Handleiding

28 Februari 2025
Bogen

Bogen MIC2S Handleiding

28 Februari 2025
Bogen

Bogen CAM8Pro Handleiding

28 Februari 2025
Bogen

Bogen BAL2S Handleiding

28 Februari 2025
Bogen

Bogen Classic Series C100 Handleiding

20 April 2023
Bogen

Bogen V150 Handleiding

11 Februari 2023

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel

Hobart

Hobart MG1532 Handleiding

27 Februari 2025
Ecler

Ecler eHMA60 Handleiding

10 Februari 2025
Alfatron

Alfatron ALF-VM41 Handleiding

5 Februari 2025
Alfatron

Alfatron ALF-VMix41 Handleiding

7 Januari 2025
Hanseatic

Hanseatic HHBL1000SD Handleiding

6 Januari 2025
Bosch

Bosch Plena PLE-1ME120 Handleiding

27 December 2024
Bosch

Bosch Plena PLE-1ME60 Handleiding

27 December 2024
Bosch

Bosch Plena PLE-1ME240 Handleiding

27 December 2024
DNA

DNA CM4-DSP Handleiding

24 December 2024
DNA

DNA Mix 4U Handleiding

24 December 2024