Citronic Q-PAD Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Citronic Q-PAD (7 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Q-PAD
Compact Mixer USB/BT/mp3
Item ref: 170.814UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Q-PAD User Manual
Introduction
Thank you for choosing a Citronic Q-PAD mixer as part of your professional sound system. This product
has been developed to provide a wide range of facilities for professional and reliable sound reinforcement.
Please read and keep this manual to achieve the best results from your purchase and avoid damage
through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC
ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If liquids
enter the housing, stop using immediately, allow the unit to dry out and have it checked by qualified
personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Use the 5Vdc power adaptor supplied or equivalent.
• Avoid ingress of water or particles into any part of the housing. If liquids are spilled on
the console, stop using immediately, allow the unit to dry out and have checked by
qualified personnel before further use
Placement
• Keep the console out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the control surface
• Allow adequate space for airflow and keep the console away from damp or dust.
Cleaning
• Use a soft cloth with a neutral detergent to clean the housing as required.
• A soft brush can be used to clear debris from between controls without damaging them
• Do not use solvents for cleaning the unit.
Q-PAD User Manual
Console layout
The Q-PAD compact mixing console has a pair of mono input channels which can accept a balanced
microphone input or switchable line/instrument input. There is also a stereo input for playback devices or
line level instruments.
All preamps have studio grade, low noise architecture for the cleanest possible path throughout the signal
chain. Console layout is set out in distinct sections to simplify operation.
The following pages are divided up into these stages to explain the details and function of each control.
Channel inputs
Channel inputs are provided as XLR or 6.3mm jack on combo sockets.
If an XLR is plugged in, this will be connected as low impedance (microphone) level.
If a 6.3mm plug is used, this will be connected as high impedance ( ) level. line
The connections for these inputs are assigned as shown below.
Balanced
Pin 1/Sleeve = Ground
Pin 2/Tip = Signal +
Pin 3/Ring = Signal –
Unbalanced
Pin 1/Sleeve = Ground
Pin 2/Tip = Signal +
Pin 3/Ring = Ground
Mono input channels
1. Combo input: Connect a balanced microphone via XLR connection or a line level (or
instrument) input via 6.3mm plug. An unbalanced XLR can be connected provided that
+48V phantom power is not used. Wired as follows.
2. -Z switch: press this switch in when connecting instruments directly or line level signals. Hi
Leave this switch in the out position for microphone or low impedance inputs.
3. +48V phantom Press this button in to enable +48V phantom power to the pair of XLRs and the LED
indicator will light. This provides power to some condenser microphones and DI boxes.
Do not use phantom power with unbalanced XLR connectors. his does apply to any jack inputs) (t
Channel controls
4. GAIN Adjust this to match the input signal level to be suitable for the channel.
Increase this setting if the input source is quiet.
Reduce this setting if the channel is overloading or sounds distorted.
5 This control can boost or cut the high frequencies . HI
by ±15dB (12 o’clock position is zero)
6 This control can boost or cut the low frequencies . LOW
by ±15dB (12 o’clock position is zero)
7 DELAY Controls how much of this channel is fed through the delay effect section .
8. LEVEL Adjusts the output level (volume) of this channel to the output section


Product specificaties

Merk: Citronic
Categorie: Mengpaneel
Model: Q-PAD

Heb je hulp nodig?

Als je hulp nodig hebt met Citronic Q-PAD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Citronic

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel

Bogen

Bogen TEL1S Handleiding

28 Februari 2025
Bogen

Bogen LMM1S Handleiding

28 Februari 2025
Bogen

Bogen LMR1S Handleiding

28 Februari 2025
Bogen

Bogen MAX1R Handleiding

28 Februari 2025
Bogen

Bogen MIC2X Handleiding

28 Februari 2025
Bogen

Bogen MIC2S Handleiding

28 Februari 2025
Bogen

Bogen CAM8Pro Handleiding

28 Februari 2025
Bogen

Bogen BAL2S Handleiding

28 Februari 2025