Adastra DM-8 Handleiding

Adastra Mengpaneel DM-8

Lees hieronder de 📖 handleiding in het Nederlandse voor Adastra DM-8 (8 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

DM-8

DIGITAL MESSAGING UNIT

Item ref: 053 953. UK

User Manual

Version 3.1

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

953.053 User Manual UK

Introduction

Thank you for choosing an Adastra -8 digital messaging unit for scheduled music, announcements, and alerts in your public address DM

system. This unit is designed to provide flexible and hassle-free automation of audio playback, fully programmable by the operator.

Please read this manual to gain the best results from your product and avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit.

SAFETY NOTICE

1. Prior to use, read through this manual

2. Keep the manual in good condition

3. Pay attention to safety warnings

4. Observe all operating requirements

5. Do not use the device near water or wet areas

6. For cleaning, only use a lint-free, dry cloth

7. Install according to the specifications

8. Place away from heat sources or heating appliances

9. Use mains lead provided and avoid damage to cable or connectors

10. Unplug power from mains during stormy weather or if unused for long periods

11. In case of malfunction, water ingress or other damage, consult qualified service personnel

12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing

13. Please pay attention to warning symbols during transit and placement

14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel

15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection

16. Ensure correct operation of the mains switch

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.

If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before

further use. Avoid impact, extreme pressure or heavy vibration to the case

No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

Safety

• Check for correct mains voltage and condition of IEC lead before connecting to power outlet

• For DC power, use a stable 24Vdc supply connected to the 24Vdc power terminals on the rear panel.

Placement

• This unit can be used free-standing or fixed into a 19” rack

• Ensure adequate support and access to controls and connectors when rack-mounting

Cleaning

• Use a soft cloth with a neutral detergent to clean the housing as required

• Do not use strong solvents for cleaning the unit

Firmware upgrading

• A USB port is included on the rear panel to enable future firmware upgrades as they become available

953.053 User Manual UK

Front panel

Rear panel

Preparing the SD Card

The DM-8 message player requires an SD card (or microSD with adaptor) to read the message and schedule information

from. The SD card should be formatted to FAT32 and is recommended to be between 4GB and 32GB in capacity.

NOTE: It is necessary to use a new or completely blank SD

card. If re-using an existing SD card, it must be fully formatted

using the application called SD Memory Card Formatter,

which is available at the website. sdcard.org

The standard “Format” function provided by your PC operating

system does not always remove all of the data and the SD card

might not work with the DM-8.

If pre-recorded messages are to be used, these must be in

standard mp3 audio format and stored to the root folder of the

SD card with file names as follows…

“ .mp3… .mp3” M001 M002 M003.mp3, .mp3, M099

… for up to 99 message tracks.

The message tracks must be stored into a folder called MESSA,

which itself needs to be in the root folder of the SD card, for

the DM-8 to recognize them.

The message schedule must be stored on the SD card as a text

file, named as which can be created using the free application. schedule.txt DM8_Schedule_Editor.exe

This a pplication is downloadable from… http://www.avsl.com/assets/downloads/953053UK_software.zip

and runs without installation on PC computers running Windows XP and above.

Paging microphone gain adjustment

Message 1 - direct trigger buttons 8

Paging microphone XLR/jack combo input

Message output leve control l

Paging button

SD card slot

Schedule / Record / Return button

10.

Output level indicator LEDs

Clock set / Repeat button

11.

Power on/off switch

LCD display

12.

IEC mains inlet and fuse holder

17.

Phantom power & mic/line level DIP switches

13.

24Vdc power terminals

18.

Paging microphone or line input (screw terminals)

14.

Message 1-8 trigger RELAY terminals &

19.

BGM background music input (RCA L+R)

15.

Balanced line output (screw terminals)

20.

BGM background music output level

16.

Unbalanced line output (2 x RCA)

Product specificaties

Merk:	Adastra
Categorie:	Mengpaneel
Model:	DM-8
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	1650 g
Breedte:	150 mm
Diepte:	44 mm
Hoogte:	483 mm
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Beeldscherm:	LCD
Maximale capaciteit van de geheugenkaart:	32 GB
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Microfoon, line-in ingang:	Ja
Rack-montage:	Ja
Aantal kanalen:	1 kanalen
Microphone input impedance:	2.2 Ohm
Rackcapaciteit:	1U
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	- W
Aantal microfooningangen:	1
Synchronisatie ingangsimpedantie:	2.2 Ohm
Line inputs (RCA):	1
Digitaal geluid verwerken:	- Bit
Spook power:	+20 V
Booth out (RCA):	1
Gebalanceerde lijn output level:	1 V