Yamaha YX-500R Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha YX-500R (12 pagina's) in de categorie Muziekinstrument. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
CONCERT XYLOPHONE
YX500R/YX500F
『安全上のご注意』および『ガススプリング取り扱いに関する注意事項』を必ずお読みください。
Carefully read the contents of this manual, especially all precautions.
Lesen Sie unbedingt die „Vorsichtshinweise für die Handhabung der Gasfeder“ und die „Vorsichtsmaßregeln“.
Lire attentivement les paragraphes « Précautions de manipulation du ressort à gaz » et « Précautions à observer ».
Lea sin falta las “Precauciones para la manipulación del muelle de gas” y las “Precauciones”.
Обязательно прочтите разделы
Предосторожности при обращении с пневматической пружиной
и
Меры предосторожности
.
务请阅读“气弹簧操作注意事项”和“注意事项”
“가스 스프링 취급상의 주의사항” 및 “주의사항” 을 반드시 읽어 주십시오 .
取扱説明
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Руководство пользователя
使用手册
사용설명
English /
日本語
Русский / Español Français / Deutsch
한국어
/
中文
2
Precautions
Please read the following instructions and explanations on handling before using the xylophone.
Using the Xylophone Safely
The xylophone is an instrument that gets used in many places ranging from school to home,
by a wide variety of people, from children to professional musicians. For your safety, please observe the following
precautions regarding the placement and daily use of the instrument. Especially in the case of children,
a responsible adult should provide instruction on the proper use and treatment of the instrument.
Preventing Injuries—Obey all precautions described below
This icon indicates actions that are prohibited.
This icon urges you to pay caution (includes dangers and warnings).
This icon indicates instructions that should be strictly followed.
Icons are used in this section to pro-
mote the safe and proper use of this
product and to prevent harm and prop-
erty damage to you and others. Please
fully understand the meaning of the
icons before reading the manual.
About the
Icons
Warning Disregard of the warnings with this mark or misuse may result
in death or serious injury.
Hold the instrument by
the frame end and push
forward slowly.
Caution Disregard of cautions with this mark or misuse may result in
personal injury or the loss of personal property.
Handling
Do not touch cracked tone bars.
Cracked tone bars have sharp edges that can cut
hands. Please change cracked tone bars as soon as
possible.
Do not use the mallets for any other purpose than
playing the instrument.
Misuse of the mallets may result in unexpected injury
or accidents.
Always make sure that the wing bolts and wing
nuts are firmly tightened to prevent parts from
becoming loose during performance.
Using the instrument with loose bolts and nuts can
cause trouble during performance such as unexpect-
ed movement, etc., or parts falling off during transport
resulting in injury.
Be careful not to pinch your fingers or hands
when assembling.
Doing so may cause injury due to pinched fingers,
etc. When assembling legs, reinforcement stays, and
resonator pipes, use two persons taking special care
to double-check each other as the assembly proceeds.
Never lift or carry the instrument alone.
If the instrument must be lifted, never do so alone.
Lifting the instrument by yourself may result in
pinched fingers or limbs, injury to your back, or other
serious injury. If the instrument must be lifted, always
do so with at least two persons lifting the instrument
with a firm grip by its frame ends.
* Instrument weights are as follows:
YX500R: 35kg (77lbs. 3oz.)
YX500F: 38kg (83lbs. 12oz.)
When moving the instrument on its casters, hold
the instrument by its frame end and push forward
slowly across smooth, flat surfaces.
Moving the instrument on surfaces that are sloped,
uneven, or graveled may result in the instrument fall-
ing over or getting out of control.
Instrument Placement
Do not place the instrument on an unstable sur-
face such as a slope or uneven surface.
The instrument may fall or overturn resulting in injury.
Instrument Handling
Do not lean on or climb on the instrument.
The instrument may fall causing serious injury.
Do not play around the instrument.
It may cause the instrument to fall over. Bumping into
the instrument may result in injury.
Keep away from the instrument during earth-
quakes.
Strong tremors can cause the instrument to move
about or overturn.
Instrument Movement
Do not run while pushing the instrument.
The instrument may become impossible to stop,
crash into a wall, and cause serious injury.
Never carry the assembled instrument up or down
the stairs.
Parts may fall off, or you may loose balance resulting
in serious injury. Only move the instrument after it has
been disassembled.
3
Caution
Please observe the following instructions for proper handling of the gas spring when adjusting the height
of the xylophone stand.
Precautions for Handling the Gas Spring
Do not lubricate. Additional oil on the gas spring will
reduce the durability of the seal and cause oil leakage.
Do not hit the piston rod or cylinder. A nick in the piston
rod or cylinder will shorten the service life of the seal or
result in defective operation.
Do not bang on or apply pressure to the gas spring. It
will cause oil leakage, malfunction or breakage.
Do not expose the gas spring to excessive tempera-
ture. Use the instrument only in temperatures ranging
from -4°F (-20°C) to 122°F (50°C).
Do not disassemble. High-pressure gas is sealed inside
the gas spring, so any attempt to disassemble it cre-
ates a high risk of bodily injury.
Do not apply an excessive force to lift the frame end,
which may pull off the gas spring from the leg, causing
malfunction or breakage.
Do not bend. A poorly balanced load will cause the rod
to bend, resulting in defective operation.
Do not apply a high-tensile load to the gas spring as it
will cause damage to the gas spring.
In the event of a failure, stop using the instrument and contact the shop where you pur-
chased it. If your dealer is unable to assist you, please contact Yamaha directly as per enclo-
sure.
Precautions Regarding the Gas Spring
* Drill two holes, as shown above, to release
the gas before discarding the gas spring.
qw35mm
15mm
Drill Plastic bag
Fig. 1
[Caution]
Do not make a hole anywhere in the gas spring
other than in the specified positions (q and w
in the Fig.1).
Do not push.
Do not cut the gas spring.
Do not throw the gas spring into a fire.
[Discarding procedure]
1. Put the gas spring in a plastic bag. Using a drill of 2 to
3 mm, make a hole q from outside of the plastic bag
at the position as specified in the figure to release the
gas and oil and then make a hole w at the position as
specified. (Be sure to make holes in the order of q
and w.)
2. If a vinyl bag is not used, the oil and drill chips will
spread. (In such a case, wear eye protection glasses. )
Caution
Instructions for Discarding the Gas Spring
Pressured nitrogen gas is sealed inside the gas spring. Be sure to release the gas before discarding it, or
an explosion may occur, causing injury.


Product specificaties

Merk: Yamaha
Categorie: Muziekinstrument
Model: YX-500R

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha YX-500R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Muziekinstrument Yamaha

Handleiding Muziekinstrument

Nieuwste handleidingen voor Muziekinstrument