Yamaha YCHS7018 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha YCHS7018 (10 pagina's) in de categorie Muziekinstrument. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
한국어
CHIMES
YCH7018 YCH6018
CHIME STAND
YCHS7018 YCHS7006
取扱説明書
Owners Manual
Benutzerhandbuch
Mode d’emploi
Manual de instrucciones
Manual do Proprietário
Руководство пользователя
使用说明书
사용설명
使用說明書
日本語
EnglishDeutschFrançaisEspañolPortuguêsPусский
简体中文繁體中文
YCH7018YCHS7006
JA KOZH-TWRUPTESFRDEEN ZH-CN
2 • YCH7018 YCH6018 YCHS7018 YCHS7006 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to
avoid the possibility of serious injury or even death
from the chimes overturning, falling, the assembly
running out of control or the parts falling.
Lock the casters except when moving or transporting the
chimes.
Use a sufficient number of people when moving or transporting
the chimes.
The chimes should only be moved across smooth, flat surfaces
when using the casters. Always move the chimes slowly,
supporting the side frames as shown in the illustration. Never
move the chimes on a sloped, unstable, or gravel surface.
Never run when moving or transporting the chimes. Doing so
can result in the chimes running out of control, hitting an
obstacle or wall and causing serious injury.
With the sound tubes attached, do not lift the chimes and do not
go up or down stairs with the chimes. Only move the chimes
after the unit has been disassembled.
Stop use immediately if you notice any of the following
abnormalities in the casters.
- One of the casters stops rotating when moving.
- The stoppers behave abnormally.
These could cause the chimes to move or tip over, possibly
causing injury.
Do not go near the chimes during an earthquake. Strong shaking
during an earthquake could cause the chimes to move or tip
over, possibly causing injury.
CAUTION
Always follow the basic precautions listed below to avoid
the possibility of physical injury to you or others, or
damage to the instrument or other property. These
precautions include, but are not limited to, the following:
When transporting the chimes, make sure that all caster locks
are released.
When removing the chimes from the package, raising the chimes
and assembling the stand, always use two or more people.
Failure to do so might result in damage to the chimes or the
chimes overturning, and possibly causing injury.
Assemble the chimes in the proper sequence by following the
assembly instructions in this manual. Failure to do so might
result in chimes overturning, and possibly causing injury.
Make sure to tighten the screws or bolts regularly. Failure to do
so might result in misalignment of the chimes during playing,
noises, possibly causing injury.
Use only the specified chime stand. Failure to do so might result
in the sound tubes falling, and possibly causing injury.
Before every playing, make sure to confirm that the wires are not
damaged and that all wires are properly secured. Replace any
wire that is damaged. Failure to do so might result in the sound
tubes falling, and possibly causing injury.
When handling the sound tubes, be careful not to drop them.
Especially be careful when transporting and attaching or removing
the sound tubes, and when replacing the wires. Failure to do so
may result in damage to the sound tubes, possibly causing injury.
Do not recklessly swing the chime mallets. It may injure people
or damage surrounding objects.
Make sure to periodically check that the screws and bolts are not
loose. Use the included hex key of the YCHS7006. For models
other than YCHS7006, use the hex key you own or consult
qualified Yamaha service personnel.
Keep small parts (such as wires, wire caps, screws or bolts)
away from small children who might accidentally swallow them.
Replace the wire cap if it is damaged.
Do not directly touch the frayed wire with your hand.
Before playing, make sure to check that the tops of all the sound
tubes are in line. Failure to do so might result in the sound tubes
falling, and possibly causing injury.
Do not insert your finger, hand or foot in any gaps on the
casters, height adjustment mechanism or active part of
dampers. Doing so can result in pinching your finger/hand/foot,
and possibly causing injury.
Moving the instrument
Handling
Moving the instrument
Assembly
Handling
YCH7018 YCH6018 YCHS7018 YCHS7006 Owner’s Manual3
NOTICE
When transporting the chimes, remove all sound tubes from
the chime stand. After the sound tubes are removed, wrap
them in a soft cloth, etc., to prevent scratching while
transporting.
When attaching or removing the sound tubes, do so in a
place where there is sufficient room, so that the tubes do not
come into contact with other objects.
When transporting or moving the instrument, do not subject it
to strong shocks.
The sound tube’s pitch and/or tone may change if the tubes
are scratched or bent. Be careful to avoid this.
Hit the Head cap when playing the chime. Never directly hit
the sound tube with the chime mallet. Failure to do so might
result in damage to the sound tube.
Do not use hammers other than chime mallets for playing the
chimes. Doing so can result in damage to the sound tube.
Do not use the chime mallets for anything other than playing
the chimes.
Always use the chimes on a flat, level surface. The chimes
will not function properly on a sloped surface.
Do not rest your weight, or place heavy objects on the
damper pedal. Doing so can result in damage to the damper.
When not playing the chimes, contact the damper with the
sound tubes. Doing so prevents resonance of the sound
tubes from the acoustic sound of surrounding instruments.
Do not keep the chimes in an environment with high
temperature or high humidity.
When cleaning the product, wipe with a soft and dry cloth. Do
not use thinners or polishing preparations.
INFORMATION
When exposed to the air, the sound tubes may discolor over
time, but this does not affect the sound quality.
Use the sound tube and chime stand in the correct
combination. When a sound tube for the YCH6018 is attached
to the YCHS7018, the reverberation cannot be shortened by
the damper pedal.
The illustrations as shown in this manual are for instructional
purposes only, and may appear somewhat different from
those on your instrument.
The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.
Chime mallet
Sound tube
Head cap


Product specificaties

Merk: Yamaha
Categorie: Muziekinstrument
Model: YCHS7018

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha YCHS7018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Muziekinstrument Yamaha

Handleiding Muziekinstrument

Nieuwste handleidingen voor Muziekinstrument