VTech VM302 Handleiding

VTech Babyfoon VM302

Lees hieronder de 📖 handleiding in het Nederlandse voor VTech VM302 (2 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 84 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

When unpairing is successful, the POWER

light on the selected baby unit flashes. The

parent unit displays for a while, and then the

image from the baby unit previously viewing.

Positioning the baby monitor

NOTE

This baby monitor is intended as an aid. It is not a

substitute for proper adult supervision, and should not

be used as such.

CAUTION

Keep the baby unit out of the reach of the baby. Never

place or mount the baby unit inside the baby’s crib or

playpen.

Place the baby unit at least 1 meter / 3 feet

away from your baby.

NOTE

If you experience audio feedback on either the parent

unit or baby unit, move the parent unit further away

until there is no more audio feedback; or press VOL

on the parent unit to lower the audio feedback sound.

2. Place the parent unit at least 1 meter / 3

feet away from the baby unit.

TIP

You can increase the speaker volume of the parent unit

if you cannot hear the sounds transmitted from the baby

unit.

User’s manual

VM302

Accessory baby unit

for use with VTech model

VM312/VM312-2

NOTES

Use only the baby unit power adapter supplied

with this product.

Make sure the electrical outlet is not controlled by

wall switch.

The baby unit power adapter is intended to be

correctly oriented in a vertical or floor mount

position. The prong are not designed to hold the

plug in place if it is plugged into a ceiling, under-

the-table or cabinet outlet.

Make sure the baby unit and the power adapter

cord are out of reach of children.

•

Connect the baby unit 1Infrared LEDs

Backup light for night vision.

2POWER on/off indicator

On when the baby unit is powered on

and currently linked to parent unit.

Flashes when the baby unit is not

linked to a parent unit; or the pairing

process is in progress; or the parent

unit is not viewing this baby unit.

•

3Power jack

4 (On/Off)

Press to power on.

Press and hold to power off.

•

5Night sensor

6Camera

7/VOL

Press to increase the listening volume.

8PAIR

Press and hold to pair to the parent unit.

9/VOL

Press to decrease the listening volume.

10 Microphone

11 Speaker

12 Ball joint stand

Pan or tilt to adjust the camera angle.

13 Base

OverviewWhat’s in the box

Congratulations

on purchasing your new VTech product.

Before using this product, please read

Important safety instructions.

This manual has instructions on how to set

up and pair your new baby unit. For complete

instructions on using the baby unit, see the

user’s manual that came with your video and

audio monitor.

For support, shopping, and everything new at

VTech, visit our website at

www.vtechphones.com.

3-month warranty!

Visit www.vtechphones.com.

Registration

enhanced warranty support.

Product news

Learn about the latest VTech

products.

Pair and replace extra new baby unit

Each newly purchased baby units (VM302)

must be paired to your video and audio monitor

system (VM312/VM312-2).

NOTES

You can pair a maximum of four baby units to

your parent unit. Each new baby unit must be

paired to the parent unit before use.

Make sure you power on the parent unit before

pairing.

To pair and replace a baby unit:

Press MENU/SELECT when the parent unit

is not in use.

Press VOL or VOL to choose .

Press or to choose a desired baby unit

slot, then press MENU/SELECT. The screen

displays .

NOTE

If you choose an occupied baby unit slot, the new

baby unit will replace the existing baby unit.

4. Press and hold on the new baby unit

until the POWER light flashes.

Then immediately press and hold PAIR

until the POWER light turns on.

When pairing is successful, the screen displays

, and then the image from the newly paired

baby unit.

NOTES

If pairing fails, the screen displays . Try the

pairing process again.

Only one baby unit can be paired at a time.

To unpair a baby unit:

NOTE

Make sure you power on the baby unit and the parent

unit before unpairing the baby unit.

Press MENU/SELECT when the parent unit

is not in use.

Press VOL or VOL to scroll to .

Press or to select the desired baby unit

(1, 2, 3 or 4).

Press and hold TALK until and

display.

Press or to select to cancel, or to

confirm the unpair process.

Press MENU/SELECT to confirm your selection.

•

Before use

To keep this product working well and looking good,

follow these guidelines:

Avoid putting it near heating appliances and

devices that generate electrical noise (for example,

motors or fluorescent lamps).

DO NOT expose it to direct sunlight or moisture.

Avoid dropping the product or treating it roughly.

Clean with a soft cloth.

DO NOT immerse the baby unit in water and do

not clean them under the tap.

DO NOT use cleaning spray or liquid cleaners.

Make sure the baby unit is dry before you

connect them to the mains again.

•

General product care

When using your equipment, basic safety

precautions should always be followed to reduce the

risk of fire, electric shock and injury, including the

following:

Follow all warnings and instructions marked on

the product.

Adult setup is required.

This product is intended as an aid. It is not

a substitute for responsible and proper adult

supervision and should not be used as such.

This product is not intended for use as a medical

monitor.

Do not use this product near water. For example, do

not use it next to a bath tub, wash bowl, kitchen sink,

laundry tub or swimming pool, or in a wet basement

or shower.

Use only the adapter included with this product.

Incorrect adapter polarity or voltage can seriously

damage the product.

Baby unit power adapter: Input 100-240V AC

150mA 50/60Hz; Output: 6V DC 600mA.

The power adapter are intended to be correctly

oriented in a vertical or floor mount position. The

prongs are not designed to hold the plug in place

if it is plugged into a ceiling, under-the-table or

cabinet outlet.

Important safety

instructions

Unplug this product from the wall outlet before

cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

Do not cut off the power adapter to replace it with

other plug, as this causes a hazardous situation.

Do not allow anything to rest on the power cords.

Do not install this product where the cords may be

walked on or crimped.

This product should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power

supply in your home, consult your dealer or local

power company.

Do not overload wall outlets or use an extension

cord.

Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.

This product should not be placed in any area

where proper ventilation is not provided. Slots and

openings in the back or bottom of this product

are provided for ventilation. To protect them from

overheating, these openings must not be blocked

by placing the product on a soft surface such as

a bed, sofa or rug. This product should never be

placed near or over a radiator or heat register.

Never push objects of any kind into this product

through the slots because they may touch

dangerous voltage points or create a short circuit.

Never spill liquid of any kind on the product.

To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the product other than specified access

doors may expose you to dangerous voltages

or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently

used.

You should test the sound reception every

time you turn on the units or move one of the

components.

Periodically examine all components for damage.

Be aware of possible loss of privacy while using

public airwaves. Conversations may be picked

up by other nursery monitors, cordless phones,

scanners, etc.

Children should be supervised to ensure that they

do not play with the product.

The product is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

SAVE THESE INSTRUCTIONS

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

Cautions

Use and store the product at a temperature

between 32oF and 104oF.

Do not expose the product to extreme cold, heat

or direct sunlight. Do not put the product close to a

heating source.

Make sure the baby unit(s) and the adapter cord(s)

are always out of reach of the baby, at least 3 feet

away from the baby or crib, to avoid a possible

strangulation hazard.

Never place the baby unit(s) inside the baby’s

crib or playpen. Never cover the baby unit(s) with

anything such as a towel or a blanket.

Other electronic products may cause interference

with your baby monitor. Try installing your baby

monitor as far away from these electronic devices

as possible: wireless routers, radios, cellular

telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and

cordless telephones.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital cordless

devices):

Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless devices and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration,

WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches

from the pacemaker.

Should NOT place wireless devices directly over

the pacemaker, such as in a breast pocket, when it

is turned ON.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons using

wireless devices.

Electromagnetic fields (EMF)

This VTech product complies with all standards

regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this

user’s manual, the product is safe to be used based

on scientific evidence available today.

•

At least 1 meter

(3 feet)

At least 1 meter (3 feet)

Operating range

The operating range of the baby monitor is

up to 300 meters (1,000 feet) outdoors or

50 meters (160 feet) indoors. The actual

operating range may vary depending on

the environmental conditions, and other

interferences such as walls, doors, and other

obstructions.

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to

the holder of a valid proof of purchase (“Consumer”

or “you”) that the Product and all accessories

provided in the sales package (“Product”) are

free from defects in material and workmanship,

pursuant to the following terms and conditions,

when installed and used normally and in accordance

with the Product operating instructions. This limited

warranty extends only to the Consumer for Products

purchased and used in the United States of America

and Canada.

What will VTech do if the Product is not free from

defects in materials and workmanship during

the limited warranty period (“Materially Defective

Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair or

replace at VTech’s option, without charge, a

Materially Defective Product. If we repair the Product,

we may use new or refurbished replacement

parts. If we choose to replace the Product, we

may replace it with a new or refurbished Product

of the same or similar design. We will retain

defective parts, modules, or equipment. Repair or

replacement of the Product, at VTech’s option, is

your exclusive remedy. VTech will return the repaired

or replacement Products to you in working condition.

You should expect the repair or replacement to take

approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends

for ONE (1) YEAR from the date of purchase. If VTech

repairs or replaces a Materially Defective Product

under the terms of this limited warranty, this limited

warranty also applies to the repaired or replacement

Product for a period of either (a) 90 days from the date

the repaired or replacement Product is shipped to

you or (b) the time remaining on the original one-year

warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, fire, water or other

liquid intrusion; or

Frequency

control

Crystal controlled PLL synthesizer

Transmit

frequency

2407.5 - 2475 MHz

Channels 21

Nominal

effective

range

Maximum power allowed by FCC

and IC. Actual operating range may

vary according to environmental

conditions at the time of use.

Power

requirement

Input: 100-240V AC 150mA 50/60Hz

Output: 6V DC 600mA

FCC Part 15

This equipment has been tested and found to comply

with the requirements for a Class B digital device

under Part 15 of the Federal Communications

Commission (FCC) rules. These requirements are

intended to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

Changes or modifications to this equipment not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

To ensure safety of users, the FCC has established

criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander

according to the intended usage of the product. This

product has been tested and found to comply with

the FCC criteria. The baby unit shall be installed

and used such that parts of all persons’ body are

maintained at a distance of approximately

8 in (20 cm) or more.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

Industry Canada

This device complies with Industry Canada licence-

exempt RSS standard(s).

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation.

The term ‘’IC:‘’ before the certification/registration

number only signifies that the Industry Canada

•

FCC and IC regulations

Limited warranty

Product that has been damaged due to repair,

alteration or modification by anyone other than an

authorized service representative of VTech; or

Product to the extent that the problem experienced

is caused by signal conditions, network reliability,

or cable or antenna systems; or

Product to the extent that the problem is caused

by use with non-VTech accessories; or

Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered illegible; or

Product purchased, used, serviced, or shipped for

repair from outside the United States of America

or Canada, or used for commercial or institutional

purposes (including but not limited to Products

used for rental purposes); or

Product returned without a valid proof of purchase

(see item 2 on the next page); or

Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit our

website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls and

features may save you a service call.

Except as provided by applicable law, you assume

the risk of loss or damage during transit and

transportation and are responsible for delivery or

handling charges incurred in the transport of the

Product(s) to the service location. VTech will return

repaired or replaced Product under this limited

warranty. Transportation, delivery or handling

charges are prepaid. VTech assumes no risk for

damage or loss of the Product in transit. If the

Product failure is not covered by this limited warranty,

or proof of purchase does not meet the terms of

this limited warranty, VTech will notify you and will

request that you authorize the cost of repair prior

to any further repair activity. You must pay for the

cost of repair and return shipping costs for the repair

of Products that are not covered by this limited

warranty.

What must you return with the Product to get

warranty service?

Return the entire original package and

contents including the Product to the VTech

service location along with a description of the

malfunction or difficulty; and

Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product

model) and the date of purchase or receipt; and

Technical specications

Specifications are subject to change without notice.

Document order number: 91-007355-010-100

technical specifications were met.

This product meets the applicable Industry Canada

technical specifications.

RF radiation exposure statement

The baby unit complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. The baby unit should be installed and

operated with a minimum distance of 8 in (20 cm)

between the baby unit and all persons’ body. Use of

other accessories may not ensure compliance with

FCC RF exposure guidelines. This transmitter must

not be co-located or operating in conjunction with

any other antenna or transmitter. This equipment

complies also with Industry Canada RSS-102 with

respect to Canada’s Health Code 6 for Exposure of

Humans to RF Fields.

Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive

agreement between you and VTech. It supersedes

all other written or oral communications related to

this Product. VTech provides no other warranties for

this Product. The warranty exclusively describes all

of VTech’s responsibilities regarding the Product.

There are no other express warranties. No one

is authorized to make modifications to this limited

warranty and you should not rely on any such

modification.

State/Provincial Law Rights: This warranty gives you

specific legal rights, and you may also have other rights,

which vary from state to state or province to province.

Limitations: Implied warranties, including those of

fitness for a particular purpose and merchantability

(an unwritten warranty that the Product is fit for

ordinary use) are limited to one year from the date

of purchase. Some states/provinces do not allow

limitations on how long an implied warranty lasts,

so the above limitation may not apply to you. In no

event shall VTech be liable for any indirect, special,

incidental, consequential, or similar damages

(including, but not limited to lost profits or revenue,

inability to use the Product or other associated

equipment, the cost of substitute equipment, and

claims by third parties) resulting from the use of this

Product. Some states/provinces do not allow the

exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may

not apply to you.

Please retain your original sales receipt as proof

of purchase.

Mesures de sécurité importantes

Lorsque vous utilisez votre appareil, vous devriez

toujours suivre certaines mesures de précaution

de base afin de réduire les risques d’incendie,

d’électrocution et de blessures corporelles, dont ceux

qui suivent:

Observez toutes les instructions et mises en

garde inscrites sur l’appareil.

L’installation par un adulte est requise.

Ce produit a été conçu pour être un dispositif

d’appoint seulement. Il n’est pas le remplacement

d’une supervision responsable et adéquate par un

adulte et ne devrait pas être utilisé comme telle.

Ce produit n’est pas conçu pour être utilisé en

tant que moniteur médical.

N’utilisez pas cet appareil près de l’eau ni de toute

autre source d’humidité, par exemple, près d’une

baignoire, cuve à lessive, évier de cuisine, dans

un sous-sol humide ni près d’une piscine, dans un

soussol humide ou une douche.

N’utilisez que les adaptateurs inclus avec ce

produit. L’utilisation d’un adaptateur dont la

polarité ou la tension serait inadéquate risque

d’endommager sérieusement le produit et mettre

votre sécurité en péril.

Adaptateur de l’unité du bébé: Entrée 100-240V

CA 150 mA 50/60 Hz; Sortie : 6 V CC 600 mA.

Lorsqu’ils sont branchés dans une prise de

courant, les adaptateurs secteur ont été conçus

pour être orientés correctement, soit à la

verticale ou au plancher. Les broches n’ont pas

été conçues pour supporter le poids du bloc

d’alimentation et le maintenir en place si celuici

est branché dans une prise au plafond, sous une

table ou dans un meuble.

Débranchez ce produit de la prise de courant

avant de procéder au nettoyage. N’utilisez pas de

nettoyants en aérosols. Utilisez un chiffon humide

pour le nettoyer.

Ne coupez pas les cordons d’alimentation pour

remplacer les fiches, car ceci peut présenter un

danger potentiel.

Ne laissez aucun objet reposer ni appuyer sur le

cordon d’alimentation. N’installez pas cet appareil

dans un endroit où l’on risque d’écraser le cordon

d’alimentation ou de le piétiner.

Ne faites fonctionner cet appareil qu’avec le type

d’alimentation indiqué sur l’étiquette. Si vous

ne connaissez pas le type d’alimentation que

vous possédez à votre domicile, consultez votre

marchand ou votre compagnie locale d’électricité.

Ne surchargez pas les prises de courant murales

ni les rallonges électriques.

Ne placez pas cet appareil sur un chariot, meuble,

trépied, support de montage ni table chancelants.

Les trous et ouvertures du boîtier, situés à

l’arrière de l’appareil ou sous celui-ci, servent à

aérer l’appareil. Pour l’empêcher de surchauffer,

ne bloquez sous aucun prétexte ces ouvertures et

n’empêchez pas l’aération adéquate de l’appareil

en le plaçant sur un lit, divan, tapis ou toute autre

surface similaire. De même, ne le positionnez

pas à proximité ni au-dessus d’une source de

chaleur ou d’un calorifère. De plus, ne placez pas

l’appareil dans un endroit avant de vous assurer

qu’il y ait une bonne circulation d’air.

N’enfoncez jamais d’objets à travers les

ouvertures de cet appareil, car ils pourraient

entrer en contact avec des points de tension

dangereux ou causer des courts-circuits qui

peuvent dégénérer en incendies ou en risques

d’électrocution. Ne renversez jamais de liquide

dans ce produit.

Afin de réduire les risques d’électrocution, ne

démontez pas cet appareil, mais apportez-le dans

un centre de service autorisé. L’ouverture du

boîtier ou le retrait de toutes pièces que contient

cet appareil, à l’exception de l’accès autorisé à

certaines portes ou ouvertures, risque de vous

exposer à des points de tension dangereux ou

d’autres dangers. Un remontage incorrect peut par

la suite présenter des risques d’électrocution.

Vous devriez tester la réception chaque fois que

vous mettez l’appareil en fonction.

Examinez les composantes afin de vérifier si

celles-ci ne sont pas endommagées.

Soyez avisé de la perte de la confidentialité

lorsque vous utilisez les ondes publiques. Les

conversations peuvent être entendues par

d’autres moniteurs de bébé, des téléphones sans

fil, des scanneurs, etc.

Les enfants devraient être supervisés afin de

vous assurer qu’ils ne jouent pas avec l’appareil.

Le produit n’est pas conçu pour être utilisé

par des personnes (incluant des enfants) aux

capacités physiques, sensorielles ou mentales

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

For cETL compliance only

réduites ou qui manquent d’expérience et de

connaissances, à moins qu’on leur ait donné

suffisamment de supervision ou d’instructions

relativement à l’utilisation de l’appareil par une

personne responsable de leur sécurité.

CONSERVEZ CES INSTRUCTIONS

Mises en garde

Utilisez et entreposez le produit à une

température entre 0˚ C (32˚F) et 40˚C (104˚ F).

N’exposez pas cet appareil à des froids ou des

chaleurs extrêmes, ainsi qu’à la lumière directe

du soleil. Ne l’installez pas près d’une source de

chauffage.

Assurez-vous que le moniteur et le cordon

de l’adaptateur sont toujours hors de portée

des enfants, à au moins 1 mètre (3 pieds) de

l’enfant ou du berceau, pour éviter tout risque de

strangulation.

Ne jamais placer le moniteur à l’intérieur du

berceau ou du parc de bébé. Ne jamais couvrir le

moniteur ou l’unité (s) portative avec un article tel

une serviette ou une couverture.

D’autres équipements électroniques peuvent

produire des interférences sur votre moniteur

vidéo et audio. Tentez d’installer votre

moniteur vidéo ou audio à l’écart des appareils

électroniques tels que des routeurs sans fil,

radios, téléphones cellulaires, interphones,

moniteurs, téléphones, ordinateurs personnels,

électroménagers et téléphones sans fil.

Stimulateurs cardiaques implantés dans

l’organisme

Les simulateurs cardiaques (ne s’applique qu’aux

dispositifs numériques sans fil):

L’organisme ‘Wireless Technology Research, LLC

(WTR)’, une firme de recherche indépendante,

a mené une évaluation pluridisciplinaire des

interférences entre les téléphones sans fil portatifs

et les stimulateurs cardiaques implantés dans

l’organisme. Appuyée par l’Administration des

aliments et drogues (FDA) des États-Unis, la firme

WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

Vous devriez maintenir les dispositifs sans fil à au

moins six pouces du simulateur cardiaque.

Ils ne doivent PAS placer le téléphone sans fil

directement sur le stimulateur cardiaque, tel que

dans une poche de chemise, lorsque celui-ci est

en marche.

L’étude effectuée par l’organisme WRS n’a pas

identifié de risque pour les détenteurs de simulateurs

cardiaques causés par les gens qui utilisent

dispositifs sans fil à proximité de ceux-ci.

Champs électromagnétiques (EMF)

Ce produit de VTech est conforme à toutes

les normes se rapportant aux champs

électromagnétiques (EMF) standard. Si vous le

•

manipulez correctement en suivant les instructions

de ce guide, son utilisation sera sécuritaire pendant

de nombreuses années, selon les meilleures

évidences scientifiques dont nous disposons

aujourd’hui.

Product specificaties

Merk:	VTech
Categorie:	Babyfoon
Model:	VM302

Heb je hulp nodig?

Als je hulp nodig hebt met VTech VM302 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Babyfoon VTech

VTech VM3252 Handleiding

16 November 2024

VTech RM5764HD Handleiding

16 November 2024

VTech DM1211 Handleiding

16 November 2024

VTech RM5766HD Handleiding

27 Februari 2024

VTech Bel & Tel Handleiding

27 Juli 2023

VTech BM2150 Handleiding

18 Juli 2023

VTech BM5100-Bear Handleiding

11 Juni 2023

VTech BM5000 Handleiding

16 Mei 2023

VTech RM5762 Handleiding

23 December 2022

VTech DM1111 Handleiding

2 Mei 2023

Handleiding Babyfoon

Nieuwste handleidingen voor Babyfoon

Chipolino Polaris Handleiding

16 November 2024

Neno Bambino Handleiding

15 November 2024

Babymoov YOO-Care A014422 Handleiding

15 November 2024

Oricom RVSL01 Handleiding

10 November 2024

Oricom RGB Handleiding

10 November 2024

Alecto DVM2028 Handleiding

5 November 2024

Niceboy ION Starlight SL3 Handleiding

28 Oktober 2024

Niceboy ION Starlight SL5 Handleiding

28 Oktober 2024

Motorola VM483 Handleiding

23 Oktober 2024

Motorola PIP1000 Connect Handleiding

23 Oktober 2024