Thermaltake TOUGHLIQUID 240 Handleiding

Thermaltake Hardwarekoeling TOUGHLIQUID 240

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake TOUGHLIQUID 240 (2 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Intel Installation Guide

AMD Installation Guide

Parts List

A x 1 J K x 12 x 12

TOUGHLIQUID 360 ARGB Sync

B x 3 C x 1 D F x 1 x 2 G x 4E x 1 H x 4

N x 1I x 4 L M x 1 x 1 O x 1

LGA 20 66/2 011

LGA 1700 LGA 1700/120 0/115X

LGA 1200 /115X

121700/1200/1156/1155/1151/1150 2066/2011-3/2011

LGA 1200/115X

LGA 1700

Tighten screw to the halfway.

Tighten screw again to ensure your

waterblock is secure enough.

ARGB Controller Installation Guide

1. Light Mode:

Switch over between 7 LED modes.

3. Light Speed:

Switch over between 4 light modes.

When light mode is in RGB Spectrum:

Click to memorize and lock the color you want, click again to unlock the 256

colors auto rotation.

Red Yellow Green Teal Blue White Purple→ → → → → →

When light mode is in Ripple :

Switch over 7 LED colors .

When light mode is in Wave and F low :

LED color can not be adjusted.

Red Yellow Green Teal Blue White Purple Rainbow→ → → → → → →

2. Color Mode:

When light mode is in Full Lighted, Pulse and Blink :

Switch over 8 LED colors .

Rainbow Full light RGB Spectrum Off Flow Radar Pulse Blink→ → → → → → →

Slow Normal Fast Extreme→ → →

MB SYNC Installation Guide

1. To use Motherboard RGB Software, please only

connect Cable F to the water block

2. Please power off the PC and check the Positive

and Negative ends on the connector before

connecting the cable to the mainboard.

Connecting the wrong end can damage the product.

NCAUTION

NCAUTIO N

Installation Guide

3 4

www.thermaltake.com

Intel AMD

A rotatable LED cap built-in

waterblock accommodates

re-orienting the logo no

matter the direction the

cooler is installed

To use the ARGB Controller, please only

connect Cable E to the water block

FAN

CPU_FAN

or PUMP

SYS_F AN

PUMP

SYS_F

ANSYS_F AN

2 3

SATA

MODE

COLOR

SPEED

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	TOUGHLIQUID 240
Kleur van het product:	Zwart
Soort:	Alles-in-één vloeistofkoeler
Materiaal buis/slang:	Rubber
Materiaal:	Aluminium
Aantal per verpakking:	1 stuk(s)
Maximum luchtstroom:	58.35 cfm
Aantal ventilatoren:	2 ventilator(en)
Kleur van de verlichting:	Multi
Verlichtings-led:	Ja
Geschikte locatie:	Processor
Geluidsniveau ventilatie (max):	22.3 dB
Ventilator diameter:	120 mm
Pomp motor snelheid (max):	3300 RPM
Fan voltage:	12 V
Supported processor sockets:	LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1700, LGA 2011 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket FM2
Maximum luchtdruk:	2.41 mmH2O
Maten ventilator (b x d x h):	120 x 120 x 25 mm
Buis lengte:	400 mm
Fan connector:	4-pin
Fan snelheid (max):	2000 RPM
Waterblok materiaal:	Koper
Fan snelheid (min):	500 RPM
Pomp voltage:	12 V
Pomp stroom:	380 mA
Stroomverbruik pomp:	4.56 W
Radiator breedte:	273 mm
Radiator diepte:	27 mm
Radiator hoogte:	120 mm
Stroomverbruik ventilatie:	1.44 W
Fan stroom:	0.12 A