Thermaltake Pacific PR32-D5 Plus Handleiding

Thermaltake Hardwarekoeling Pacific PR32-D5 Plus

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific PR32-D5 Plus (2 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !

Installation Guide

Parts List

Pump & Reservoir Bracket G1/4 Stop Plug Wrench

Clip Nuts Long Screws Short Screws

Ax 1

Bx 1 C Gx 1 x 1 Hx 1

L M Nx 1 x 1 x 1I x 1 Jx 1 Kx 4

There are two types of mounting kits, please choose

the mounting kit you want to use.

Install your fittings and

tubes, remember to use

the bottom as an outlet

and top as an inlet. Connect the reservoir

cable to the conversion

cable.

1 2 3

Support

16.8 Million Colors

Pump+Reservoir

Controller Power Cable Velcro Controller Cable Conversion cable Bridge Cable

Pacific PR32-D5 Plus

E Fx 4 x 4Dx 4

Installation Guide

Connect the reservoir cable onto the controller.

Set the DIP switch on the back side of the controller

to assign the number of the controller

123 45

NO .1

1234

NO .3

1234

NO .2

1234

NO .4

1234

NO .9

1234

NO .1 1

1234

NO .1 0

1234

NO .1 2

1234

NO .5

1234

NO .7

1234

NO .6

1234

NO .8

1234

NO .1 3

1234

NO .1 5

1234

NO .1 4

1234

NO .1 6

1234

Connect the controller cable onto the mainboard

(USB 2.0 9 pin) and controller.

If you want to connect two or more connectors,

you can use the bridge cable to connect the

controllers.

Connect the power cable to the 4pin Molex

connecter and controller.

K K

M M

www.thermaltake.com

After adding the recommended coolant, remember to

fill the reservoir to only 80% and leave the fill port cap

off. This will help stabilize your internal loop pressure

Keep the reservoir cap dry!

Do not allow coolant to

access the wire and

the LED module

Caution!

1 2 3 4

Connect the Pump power cable to

the 4pin Molex connecter.

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific PR32-D5 Plus
Kleur van het product:	Black,Transparent
Breedte:	74.8 mm
Diepte:	74.8 mm
Hoogte:	267 mm
Soort:	Waterkoelingreservoir
Netvoeding:	37 W
Materiaal:	Polymethyl methacrylate (PMMA),Polyoxymethylene (POM)
Inclusief schroeven:	Ja
Verlichtings-led:	Ja
Geschikte locatie:	Universeel
Ventilator diameter:	Nee mm
Maximum luchtdruk:	35155 mmH2O