Synology M2D18 Handleiding

Synology Controller M2D18

Lees hieronder de 📖 handleiding in het Nederlandse voor Synology M2D18 (6 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Synology Adapter Card M2D18

Hardware Installation Guide

Thank you for purchasing this Synology product! Before setting up your new Adapter Card, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your Adapter Card.

Note: All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Adapter card x 1 Heatsink x 2

Shielding bracket x 2

Standard full height bracket x 1 Nut x 3 Screws x 6

Chapter

Before You Start

Tools and Parts for Drive Installation

• A screwdriver (for removing the casing of your target installed DiskStation)

Attach M2D18 Adapter Card to Synology NAS

Please refer to Synology Hardware Compatibility List to make sure your Synology NAS supports M2D18 adapter

card before attaching it.

To install the M2D18 adapter card:

1 Press and hold the power button until you hear a beep sound to shut down your Synology NAS. Disconnect all

cables from your Synology NAS to prevent any possible damage.

2 Open the top cover of Synology NAS by removing the 6 screws that secure the main unit.

Note: Here we use DS1618+ as an example . Please refer your Synology NAS Hardware Installation Guide for the

proper casing removal process.

3 Assemble M.2 SSD:

a Push the SSD all the way into the xed bracket until it is rmly seated.

b Align the heatsink with the clips of the bracket and press the four corners down. Please make sure the

heatsink is rmly attached to the clips to ensure the smooth running of the SSD.

Note: Please remove the stretch wrap at the bottom of the heatsink before step 3-b.

Hardware Setup

Chapter

Product specificaties

Merk:	Synology
Categorie:	Controller
Model:	M2D18
Kleur van het product:	Zwart
Aantal:	1
Temperatuur bij opslag:	-20 - 60 °C
Intern:	Ja
Hostinterface:	PCIe
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	84733020
NVMe:	Ja
Uitbreidingskaartstandaard:	PCI 2.0
Output interface:	M.2
Aantal M.2 (M) slots:	2