Sonneman Lithe 3453 Handleiding

Sonneman Verlichting Lithe 3453

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonneman Lithe 3453 (2 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
©2023 SONNEMAN - A Way of Light
Assembly Instructions
Lithe
Product Information
and Warnings
3453, 3454, 3456, 3458
3' Wall Lamp
4' Wall Lamp
6' Wall Lamp
8' Wall Lamp
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un électricien qualié pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove or bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.
Instructions D'Installation
Multiple U.S. and foreign patents pending.
Assembly Instructions
to the necessary length of black wire (not included)
to reach the xture location.
6. Feed the red and black extension wires through the
drilled hole (A).
7. Using drywall anchors and screws or other appropriate
hardware, attach the mounting plate (D) so that the
center hole of the mounting plate coincides with the
drilled hole (A) and the plate is level. Make sure the red
and black extension wires extend through the hole in
the mounting plate.
8. Using the included wire nuts, connect the positive
(red) wire to the xture's positive (+) conductor and
the negative (black) wire to the xture's negative (-)
conductor. Carefully insert these connections and any
excess wire into the wall through the drilled hole (A).
9. Fit the main xture body (C) over the mounting plate (D)
so that the tabs (F) t inside the slots in the back of the
1. Note: This xture must be installed with its power
supply in a remote, accessible location in accordance
with local electrical code.
2. Shut o power to the branch circuit.
3. Remove the xture screws (E) from the main xture body
(C) and set aside. Separate the main xture body from
the mounting plate (D).
4. Determine the xture location and drill a 3/4" hole (A) at
the centerpoint of the xture.
5. The power supply (B) must be installed in a remote
and accessible location near the xture location in
accordance with local electrical code (Fig. 1). Make
appropriate electrical connections:
a. Connect the power supply’s live wire to the live
supply wire.
b. Connect the power supply’s neutral wire to the
neutral supply wire.
c. Connect the power supply's postiive (+) output wire
to the necessary length of red wire (not included) to
reach the xture location.
d. Connect the power supply's negative (-) output wire
Care Instructions:
Use a clean, dry cloth when dusting.
To protect the nish, avoid any harsh
abrasives or chemicals.
Note:
• This xture is dimmable with Electronic Low Voltage (Trailing-Edge)
type dimmers, Incandescent (Leading-Edge) type dimmers, and
0-10V type dimmers only.
(C)
(A)
(D)
(F)
Fig. 1
(B)
3456
3454
3458
(E)
(F)
(E)
3453
main xture body. Re-insert and
tighten the xture screws (E).
10. Restore power to the outlet box.

Product specificaties

Merk: Sonneman
Categorie: Verlichting
Model: Lithe 3453

Heb je hulp nodig?

Als je hulp nodig hebt met Sonneman Lithe 3453 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Sonneman

Sonneman

Sonneman Lithe 3466 Handleiding

2 April 2025
Sonneman

Sonneman Lithe 3453 Handleiding

2 April 2025
Sonneman

Sonneman Turo 3441 Handleiding

2 April 2025
Sonneman

Sonneman QB 7520 Handleiding

2 April 2025
Sonneman

Sonneman Turo 3442 Handleiding

2 April 2025
Sonneman

Sonneman Fino Duo 3779 Handleiding

2 April 2025
Sonneman

Sonneman Suspenders SLS0164 Handleiding

12 November 2024
Sonneman

Sonneman Suspenders SLS0157 Handleiding

12 November 2024
Sonneman

Sonneman Stix Plus 2792.16 Handleiding

11 September 2024
Sonneman

Sonneman Stix 2771.16 Handleiding

11 September 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Bresser

Bresser BR-2240 Handleiding

3 April 2025
DCW

DCW AARO Ceiling Handleiding

3 April 2025
Kino Flo

Kino Flo FreeStyle T21 LED Handleiding

2 April 2025
Kino Flo

Kino Flo FreeStyle T22 LED Handleiding

2 April 2025
Kino Flo

Kino Flo FreeStyle T42 LED Handleiding

2 April 2025
Ikan

Ikan MB4-2PT-KIT Handleiding

2 April 2025
Ikan

Ikan MB8 Handleiding

2 April 2025
Altman

Altman PHX LVD 5000K Handleiding

2 April 2025
Lexon

Lexon Mimi Handleiding

2 April 2025
Trust

Trust Vybz GXT 905 Handleiding

2 April 2025