Sonneman Suspenders SLS0157 Handleiding

Sonneman Verlichting Suspenders SLS0157

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonneman Suspenders SLS0157 (8 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
suspenders®
assembly instructions
A delicately scaled, modular system of interconnected elements and suspended LED luminaires.
SLS0157
September 6, 2017
©2017 SONNEMAN - A Way of Light 1 of 7
Suspenders® Product Information and Warnings
Important
• Always disconnect the power before installing or replacing Luminaires and before cleaning or
other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
• Please read all included assembly instructions and warnings carefully before installation. Contact Customer
Service if you have any questions or concerns. Before installation, please conrm that the xture is compatible
with your supply voltage and dimming system, if present.
• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory sealed
compartments, and avoid touching the LEDs with your hands or any object.
• Although all our xtures are equipped with protective devices, LED electronic systems are vulnerable to power
surges and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC
systems.
• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not replace or
substitute with another power supply.
• Remote Transformer installation must be done by a licensed electrician and in accordance with local building
and electrical codes. Remote installations should be in an accessible location, as close to the xture as possible.
The appropriate wire gauge must be used to limit the voltage drop to no more than 5%.
• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or wire
them in series.
• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built, and
improper connections may damage the xture.
• Any mounting hardware is provided for your convenience and should be used with discretion. Always use the
appropriate hardware for the mounting surface.
• To avoid excessive voltage drop, the longest electrical path from the Power Feed to the furthest Luminaire
should not exceed 30 feet.
• Suspenders transformers can be loaded up to 80% of their rated wattage. ®
• Suspenders® transformers feature short-circuit protection with automatic recovery, and will resume operation
once the short-circuit condition is removed.
• Suspenders transformers have 24VAC output, and are dimmable with Electronic Low Voltage dimmers ONLY.®
• Suspenders must be installed in dry locations ONLY.®
September 6, 2017
©2017 SONNEMAN - A Way of Light 2 of 7
Configuration
Assembly


Product specificaties

Merk: Sonneman
Categorie: Verlichting
Model: Suspenders SLS0157

Heb je hulp nodig?

Als je hulp nodig hebt met Sonneman Suspenders SLS0157 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Sonneman

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

EMOS

EMOS D5AB01 Handleiding

2 December 2024
EMOS

EMOS D3EW04 Handleiding

2 December 2024
EMOS

EMOS DCLW09 Handleiding

2 December 2024
EMOS

EMOS D4AA04 Handleiding

2 December 2024
EMOS

EMOS D4FW01 Handleiding

2 December 2024
EMOS

EMOS D5AP01 Handleiding

2 December 2024
EMOS

EMOS D5AW01 Handleiding

2 December 2024
EMOS

EMOS D4AM10 Handleiding

2 December 2024
EMOS

EMOS D4BC02 Handleiding

2 December 2024
EMOS

EMOS D5ZM01 Handleiding

2 December 2024