Sonneman Fino Duo 3779 Handleiding

Sonneman Verlichting Fino Duo 3779

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonneman Fino Duo 3779 (3 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
©2023 SONNEMAN - A Way of Light
Assembly Instructions
Fino Duo
Product Information
and Warnings
3779
60" Pendant
IMPORTANT
Always disconnect the power before installing or replacing
Luminaires and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch
circuit conductor.
Consulter un Ă©lectricien qualiî˜ŸĂ© pour vous assurer que les
conducteurs de la dérivation sont adéquats.
Please read all included assembly instructions and warnings carefully
before installation. Contact Customer Service if you have any
questions or concerns. Before installation, please confirm that the
fixture is compatible with your supply voltage and dimming system,
if present.
LEDs are highly sensitive electronic devices, and must be treated
with care. Do not open any factory sealed compartments, and avoid
touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices,
LED electronic systems are vulnerable to power surges and supply
variations. Do not install LED fixtures on the same circuit as any
motors, appliances, or HVAC systems.
Do not remove of bypass any LED Driver or Transformer that is
provided with the fixture, and do not replace or substitute with
another power supply.
Fixtures must be wired in parallel on independent leads; do not
"daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED
circuits are carefully designed and built, and improper connections
may damage the fixture.
The ends of coaxial pendant cords have been precisely stripped
and split at the factory and must not be field cut. Excess cord or
cable should be neatly coiled and reserved in the fixture canopy.
Any mounting hardware is provided for your convenience
and should be used with discretion. Always use the appropriate
hardware for the mounting surface.
Instructions D'Installation
Multiple U.S. and foreign patents pending.
Assembly Instructions
1. Shut o power to the outlet box (A).
2. Install the mounting plate (B) to the ceiling under outlet box (A) with included screws (C).
3. Determine the height at which the xture (D) is to be hung. Insert the steel cables (E)
through the respective holes in the canopy (H) and the cable locks (F) and adjust to the
desired length. To shorten the cable, push the cable up and it will be locked automatically.
To lengthen the cable, lift up on the cable and push up on the lock. While keeping the lock
depressed, lower the cable to the desired length. Release the lock to set.
4. Use the screwdriver to loosen the slotted set screws (G). Adjust height of cords. Tighten the
set screws to set. Reserve extra cord in the canopy (H).
5. Make appropriate electrical connections using wire nuts:
a. Connect the LED drivers (J) live wires to the
live outlet box wire.
b. Connect the LED drivers (J) neutral wires
to the neutral outlet box wire.
c. Connect the canopy's ground wire (green or
uncoated) to the ground outlet box wire. If
no ground is present in outlet box,
connect canopy's ground wire to the
mounting plate (B) using the green
screw (included).
6. Install canopy (H) to the mounting plate (B) with
canopy nuts (K) and make nal adjustments to the height.
7. Restore power to the outlet box (A).
Care Instructions:
Use a clean, dry cloth when dusting.
To protect the nish, avoid any harsh
abrasives or chemicals.
Note:
This xture is dimmable with Electronic Low Voltage
(Trailing-Edge), Incandescent (Leading-Edge), and 0-10V
type dimmers only.
G
E
F
H
K
J
A
B
D
C
If eld-cutting is required,
please follow these instructions:
1. Make a 1” slice along the length of the cord's outer jacket (Fig. 1).
CAUTION: Do not cut through the outer braided conductor.
2. Carefully strip the outer jacket of the cord and keep the outer
braided conductors intact (Fig. 1).
3. Slide the outer braided conductor back to create a bulge
and reveal the inner stranded conductor (Fig. 2).
4. Bend the cord to create an opening through the bunched-up
portion of outer braided conductor, then pull out the inner
stranded conductor (Fig. 3)
5. Twist together the outer braided conductor to form the negative
wire of the xture, then strip 5/8” o the end of the inner stranded
conductor to form the positive wire of the xture (Fig. 4).
6. Re-splice all power cords.
Appendix A
Inner Stranded Conductor
End
View
Insulation
Outer Jacket
Outer Braided Conductor
FAILURE TO FOLLOW THESE
INSTRUCTIONS WILL VOID THE WARRANTY
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Outer Braided
Conductor
Outer Jacket
Insulated Stranded
Conductor
Insulated
Stranded
Conductor
Negative Wire
(Outer Braided Conductor)
Positive Wire
(Insulated Stranded
Conductor)
Coaxial Power Cord:
Coax Splicing
©2023 SONNEMAN - A Way of Light
Assembly Instructions

Product specificaties

Merk: Sonneman
Categorie: Verlichting
Model: Fino Duo 3779

Heb je hulp nodig?

Als je hulp nodig hebt met Sonneman Fino Duo 3779 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Sonneman

Sonneman

Sonneman Lithe 3466 Handleiding

2 April 2025
Sonneman

Sonneman Lithe 3453 Handleiding

2 April 2025
Sonneman

Sonneman Turo 3441 Handleiding

2 April 2025
Sonneman

Sonneman QB 7520 Handleiding

2 April 2025
Sonneman

Sonneman Turo 3442 Handleiding

2 April 2025
Sonneman

Sonneman Fino Duo 3779 Handleiding

2 April 2025
Sonneman

Sonneman Suspenders SLS0164 Handleiding

12 November 2024
Sonneman

Sonneman Suspenders SLS0157 Handleiding

12 November 2024
Sonneman

Sonneman Stix Plus 2792.16 Handleiding

11 September 2024
Sonneman

Sonneman Stix 2771.16 Handleiding

11 September 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Bresser

Bresser BR-2240 Handleiding

3 April 2025
DCW

DCW AARO Ceiling Handleiding

3 April 2025
Kino Flo

Kino Flo FreeStyle T21 LED Handleiding

2 April 2025
Kino Flo

Kino Flo FreeStyle T22 LED Handleiding

2 April 2025
Kino Flo

Kino Flo FreeStyle T42 LED Handleiding

2 April 2025
Ikan

Ikan MB4-2PT-KIT Handleiding

2 April 2025
Ikan

Ikan MB8 Handleiding

2 April 2025
Altman

Altman PHX LVD 5000K Handleiding

2 April 2025
Lexon

Lexon Mimi Handleiding

2 April 2025
Trust

Trust Vybz GXT 905 Handleiding

2 April 2025