Schneider BMEH582040K Handleiding

Schneider Controller BMEH582040K

Lees hieronder de 📖 handleiding in het Nederlandse voor Schneider BMEH582040K (164 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 86 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/164

NHA58892.04

www.schneider-electric.com

Modicon M580

NHA58892 10/2019

Modicon

ModiconModicon M580

M580

M580M580

System Planning Guide for

System Planning Guide forSystem Planning Guide for

Complex Topologies

Complex TopologiesComplex Topologies

Original instructions

Original instructionsOriginal instructions

10/2019

2NHA58892 10/2019

The information provided in this documentation contains general descriptions and/or technical

characteristics of the performance of the products contained herein. This documentation is not

intended as a substitute for and is not to be used for determining suitability or reliability of these

products for specific user applications. It is the duty of any such user or integrator to perform the

appropriate and complete risk analysis, evaluation and testing of the products with respect to the

relevant specific application or use thereof. Neither Schneider Electric nor any of its affiliates or

subsidiaries shall be responsible or liable for misuse of the information contained herein. If you

have any suggestions for improvements or amendments or have found errors in this publication,

please notify us.

You agree not to reproduce, other than for your own personal, noncommercial use, all or part of

this document on any medium whatsoever without permission of Schneider Electric, given in

writing. You also agree not to establish any hypertext links to this document or its content.

Schneider Electric does not grant any right or license for the personal and noncommercial use of

the document or its content, except for a non-exclusive license to consult it on an "as is" basis, at

your own risk. All other rights are reserved.

All pertinent state, regional, and local safety regulations must be observed when installing and

using this product. For reasons of safety and to help ensure compliance with documented system

data, only the manufacturer should perform repairs to components.

When devices are used for applications with technical safety requirements, the relevant

instructions must be followed.

Failure to use Schneider Electric software or approved software with our hardware products may

result in injury, harm, or improper operating results.

Failure to observe this informati ipment damage.on can result in injury or equ

NHA58892 10/2019 3

Table of Contents

Table of ContentsTable of Contents

Safety Information. . . . . . . . . . .

Safety Information. . . . . . . . . . .Safety Information. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . .

. . . . . . . . . . . . . . 5

About the Book

About the BookAbout the Book . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.. . . . . . . .

. . . . . . .

. . . . . . . . . . . . . . 9

Part I

Part IPart I Modicon

Modicon

ModiconModicon M580 System In

M580 System In

M580 System InM580 System In . . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . .. . . . . . . . . . . . .

troduction

troduction troduction 13

1313

Chapter 1

Chapter 1Chapter 1 Hardware in a Complex M580 System

Hardware in a Complex M580 System

Hardware in a Complex M580 SystemHardware in a Complex M580 System . . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .. . . . . . . . . . . . . .

. . .

. . . . . . 15

1515

Modules and Switches in Complex M580 Systems. . . . . . . . . . . . . . . 16

1616

Overview of Complex Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2121

Planning a High-Capacity Daisy Chain Loop. . . . . . . . . . . . . . . . . . . . 23

2323

Part II

Part IIPart II Planning and Designing

Planning and Designing

Planning and DesigningPlanning and Designing a Typical M580 Network

a Typical M580 Network

a Typical M580 Network a Typical M580 Network . .

. .

. . . . 25

2525

Chapter 2

Chapter 2Chapter 2 DRS Predefined Configuration Files

DRS Predefined Configuration Files

DRS Predefined Configuration FilesDRS Predefined Configuration Files. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

. . . . . . . . . . . . 27

2727

DRS Predefined Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2828

C1: Copper RIO Main Ring and RIO Sub-ring with DIO Clouds . . . . . 38

3838

C2: Copper RIO Main Ring and DIO Sub-ring with DIO Clouds . . . . . 41

4141

C3: Fiber RIO Main Ring and Copper RIO Sub-ring with DIO Clouds 44

4444

C4: Fiber RIO Main Ring and Copper DIO Sub-ring with DIO Clouds 48

4848

C5: Copper/Fiber Main Ring Connections and RIO Sub-ring with DIO

Clouds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

5252

C6: Copper/Fiber Main Ring Connections and DIO Sub-ring with DIO

Clouds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

5757

C7: Master Copper RIO Main Ring and RIO Sub-ring with DIO Clouds 60

6060

C8: Slave Copper RIO Main Ring and RIO Sub-ring with DIO Clouds 63

6363

C9: Master Copper RIO Main Ring and DIO Sub-ring with DIO Clouds 66

6666

C10: Slave Copper RIO Main Ring and DIO Sub-ring with DIO Clouds 69

6969

C11: Master Copper/Fiber Main Ring Connections and RIO Sub-ring

with DIO Clouds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

7272

C12: Slave Copper/Fiber Main Ring Connections and RIO Sub-ring

with DIO Clouds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

7777

C13: Master Copper/Fiber Main Ring Connections and DIO Sub-ring

with DIO Clouds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

8282

C14: Slave Copper/Fiber Main Ring Connections and DIO Sub-ring

with DIO Clouds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

8686

C15: Copper/Fiber Connection for a Long-haul Hot Standby Link . . . 90

9090

Obtaining and Installing Predefined Configuration Files . . . . . . . . . . . 93

9393

Product specificaties

Merk:	Schneider
Categorie:	Controller
Model:	BMEH582040K
Ingebouwd display:	Nee
Gewicht:	1698 g
Breedte:	64.6 mm
Diepte:	130.3 mm
Hoogte:	134.6 mm
Breedte verpakking:	300 mm
Diepte verpakking:	400 mm
Hoogte verpakking:	150 mm
Soort:	Automatische aanstuurmodule
LED-indicatoren:	Stroom
Montagewijze:	Wandmontage
Certificering:	IP20\n2014/35/EU \n2014/30/EU\nUL\nCSA\nRCM\nEAC\nEN 61131-2\nEN/IEC 61010-2-201\nUL 61010-2-201\nCSA C22.2 No 61010-2-201\nIACS E10\nEN/IEC 61000-6-5\nEN/IEC 61850-3,
Duurzaamheidscertificaten:	REACH, RoHS, WEEE
Bevat geen:	Kwik
Temperatuur bij opslag:	-40 - 85 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Naleving van duurzaamheid:	Ja
Bedrijfstemperatuur (T-T):	-25 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent