SAB SG651 Handleiding

SAB Radiografisch bestuurbaar speelgoed SG651

Lees hieronder de 📖 handleiding in het Nederlandse voor SAB SG651 (44 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

SAB HELI DIVISION

G O B L I N B L A C K N I T R O

380mm

1320mm [SG651] 1385mm [SG711]

196mm

Main rotor diameter :

* 1468mm (with 650mm blades) [SG651]

* 1548mm (with 690mm blades) [SG711]

Main blade length :

* 650mm [SG651] * 690mm [SG711]

Tail rotor diameter :

* 285mm (with 105mm Tail blades) [SG651]

* 305mm (with 115mm Tail blades) [SG711]

Tail blade length :

* 105mm [SG651] * 115mm [SG711]

Weight including standard electronics:

* 4220g (Without Fuel) [SG651].

* 4300g (Without Fuel) [SG711].

Gear Ratio:

* 8.23 [SG651].

* 7.64 [SG711].

Usable Engines : YS91, YS96, YS120 - OS91, OS105.

Fuel capacity : 650cc.

SPECIFICATIONS

[ SG651 ( 650mm Size Blades ) SG711 ( 690mm Size Blades ) ]

It is extremely important that you take a moment to register your helicopter with us. This is the only way to ensure that you are

properly informed about changes to your kit, such as upgrades, retrofits and other important developments. SAB Heli Division

cannot be held responsible for issues arising with your model and will not provide support unless you register your serial number.

The Serial number is also engraved in the Aluminum Main Plate.

Thank you for your purchase, we hope you enjoy your new Goblin helicopter!

SAB Heli Division

VERY IMPORTANT

In the Manual bag you will find a product card your with serial number. Please take a moment to register

your kit online via our web site at:

Please read this user manual carefully, it contains instructions for the correct assembly of the model.

Please refer to the web site www.goblin-helicopter.com for updates and other important information.

http:

//www.goblin-helicopter.com

13 – Belt Tension and Canopy

14 – In flight

15 – Maintenance

16 – Exploded Views

17 – Spare Parts

INDEX

1 – Serial Number

2 – Important Notes

3 – Components and Box

4 – Carbon frame Assembly

5 – Tranmission Assembly

6 – Main Rotor Assembly

7 – Assembling The Modules

8 – Engine Unit Assembly

9 – Installation of Servos

10 – Installation of FBL Unit and RX

11 – Tank System Assembly

12 – Tail and Boom Assembly

Page 0

Chapter 1, Serial Number

IMPORTANT NOTES

*This radio controlled helicopter is not a toy.

*This radio controlled helicopter can be very dangerous.

*This radio controlled helicopter is a technically complex device which has to be built and handled very carefully.

*This radio controlled helicopter must be built following these instructions. This manual provides the necessary information

to correctly assemble the model. It is necessary to carefully follow all the instructions.

*Inexperienced pilots must be monitored by expert pilots.

*All operators must wear safety glasses and take appropriate safety precautions.

*A radio controlled helicopter must only be used in open spaces without obstacles, and far enough from people to minimize

the possibility of accidents or of injury to property or persons.

*A radio controlled helicopter can behave in an unexpected manner, causing loss of control of the model, making it very

dangerous.

*Lack of care with assembly or maintenance can result in an unreliable and dangerous model.

Neither SAB Heli Division nor its agents have any control over the assembly, maintenance and use of this product.

Therefore, no responsibility can be traced back to the manufacturer. You hereby agree to release SAB Heli Division from

any responsibility or liability arising from the use of this product.

SAFETY GUIDELINES

*Fly only in areas dedicated to the use of model helicopters.

*Follow all control procedures for the radio frequency system.

*It is necessary that you know your radio system well. Check all functions of the transmitter before every flight.

*The blades of the model rotate at a very high speed; be aware of the danger they pose and the damage they may cause.

*Never fly in the vicinity of other people.

*Follow all of the safety regulations relating to fuel management.

*Pay attention to the danger surrounding the cooling fan with running engine.

*Use caution when handling the muffler after a flight as they get very hot after a flight.

NOTES FOR ASSEMBLY

Please refer to this manual for assembly instructions for this model.

Follow the order of assembly indicated. The instructions are divided into chapters, which are structured in a way that

each step is based on the work done in the previous step. Changing the order of assembly may result in additional or

unnecessary steps.

Use thread lockers and retaining compounds as indicated. In general, each bolt or screw that engages with a metal part

requires thread lock.

It is necessary to pay attention to the symbols listed below:

Important

Use retaining

compound

(eg Loctite 648)

Use retaining

compound

(eg Loctite 243)

Use CA Glue

Use Proper

Lubricant

Indicates that for this

assembly phase you need

materials that are in bag xx.

Bag xx

Page 1

Chapter 2, Important Notes

Product specificaties

Merk:	SAB
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	SG651
Kleur van het product:	Black, Yellow
Gewicht:	4700 g
Breedte:	196 mm
Hoogte:	380 mm
Materiaal behuizing:	Carbon, Plastic
Capaciteit van de accu/batterij:	3000 mAh
Lengte:	1320 mm
Constructietype:	Montagekit
Type product:	Helikopter
Type motor:	Stikstofmotor
Aantal propellers:	2 propellers
Diameter rotor:	1468 mm
Aantal hoofdrotorbladen:	2
Aantal ontvangstkanalen:	6
Zendfrequentie:	2.4 GHz
Reproductie:	Nee
Aantal kanalen zender:	6
Lengte hoofdblad:	650 mm
Stabilisatiesysteem:	Flybarloze (FBL) rotorkop
Diameter staartrotor:	285 mm
Aantal servo's:	5