Philips HR2839 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Philips HR2839 (4 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
English
Important
• Read the instructions carefully and look at the illustrations before you start using the
appliance.
• To avoid damage, check if the voltage indicated on the appliance corresponds to the mains
voltage in your home (220 V) before you connect the appliance.
• Never remove accessories or parts while the appliance is running.
• Do not let the appliance run unattended.
• To prolong the lifetime of this appliance, it is advisable to wait for 2 minutes after you have
processed heavy-duty recipes for 3 minutes, before you let the appliance run again.
• Keep the appliance and its parts out of the reach of children.
• Never immerse the motor unit in water.
• Never use any accessories or parts from other manufacturers or which have not been
specifically advised by Philips. Your guarantee will become invalid if such accessories or
parts have been used.
• If the mains cord of the appliance is damaged, it must always be replaced by Philips or
service center authorized by Philips in order to avoid hazardous situations.
• Technical specifications: 220V, 50Hz, 325W.
• For Household use only.
Blender:
• Before you start using the blender, make sure that the blade unit is securely fitted to the
blender jar.
• Do not fill the blender jar with ingredients that are hotter than 80 °C (approx. 175 °F).
• To avoid spilling, do not fill the jar above the maximum level indication (i.e. 1.5 litre). When
blending liquid, do not put more than 1.25 litre in the jar. Always insert the stopper into the
lid before you start processing.
• Never put your hand or any objects in the blender jar while the appliance is switched on. If
necessary, use a spatula to remove food from the wall of the jar after you have switched off
the blender.
Soy bean filter (extra):
• Do not use the filter to process hot ingredients.
• The filter should never be filled beyond its metal part.
• Soak soy beans for 4 hours before processing them.
• Make sure the filter has been properly inserted before you switch the appliance on.
Mill (only type HR 2839):
• The cutting edges of the blade unit are very sharp: avoid touching them!
• Make sure that the blade unit and beaker have been properly assembled before you mount
them onto the motor housing. Never mount the blade unit without the beaker.
• Always make sure that the rubber sealing ring has been correctly placed before you start
using the appliance. Correct assembly of the ring guarantees that the mill is properly
closed and that ground ingredients will not be spilt.
• Do not fill the beaker above the maximum level indication (MAX).
• Never let the mill accessory run for more than 30 seconds without interruption.
• The mill accessory is not suitable for grinding very hard ingredients, such as nutmeg and
ice cubes.
• Always process cloves, star anise and aniseed together with other ingredients. If they are
processed separately, they may attack the plastic parts of the mill.
• Never put any liquids in the mill accessory.
General description (fig 1)
AMotor unit
BDriving shaft
CSelector knob (rotate)
O= off
1= minimum speed
2= maximum speed
M= pulse position
DQuick Clean button
ECord storage compartment
Blender
FStopper
GLid
HOpening in the lid
ISpout
JBlender jar
KLevel indications
LRubber sealing ring
MBlade unit
Soy bean filter (extra)
NFilter
Mill (only with type HR 2839)
OBeaker
PRubber sealing ring
QMill blade unit
Cord storage
You can store excess mains cord by winding it
around the reel in the base of the appliance
(fig. 2). Fix the cord at the required length by
pressing it into the slot at the back of the
appliance (fig. 3).
Built-in safety lock
The appliance has been equipped with a built-in
safety lock that prevents it from functioning if the
blender jar or the mill have been assembled
incorrectly or have not been assembled at all.
Please note that the blender jar or the mill
should never be used to switch the appliance
on and off!
Blender
Assembly
- Wash all detachable parts (see section
"Cleaning") before you use the blender for the
first time.
- Put the rubber sealing ring around the edge of
the blade unit (fig. 4).
- Fix the blade unit to the blender jar by turning it
into the direction of the arrow (fig. 5).
- Mount the assembled jar onto the motor
housing and turn it in the direction of the arrow
until it is firmly fixed (fig. 6).
Warning: Do not exert undue pressure on the
handle of the jar.
- After putting the ingredients in the jar, fix the lid
onto the jar by pressing it down (fig. 7).
- Insert the stopper by pushing it down gently
and turning it in the direction of the arrow until it
is firmly fixed (fig. 8).
To disassemble the blender, proceed in reverse
order and opposite direction.
Speed selection
- Make sure that the appliance is plugged in and
the blender jar has been properly attached
before you switch the appliance on.
- Select the speed that is most suitable for the
ingredients you want to process (fig. 9):
speed for light processing of mainly liquid1
ingredients, e.g. chocolate milk and
vitamin drinks.
speed for heavy processing of mainly solid2
ingredients.
• If you are not sure which speed to select, you
can always use the highest speed (speed 2).
- To let the appliance run for only a few
moments at a time, set the switch to position M
and release it straightaway. Repeat this
procedure as often as necessary.
- To switch the motor off, set the selector knob to
position O.
Tips
• The opening in the lid can be used for adding
ingredients while the motor is running (fig. 10).
• The longer you let the appliance run (max. 3
minutes), the finer the blending result will
generally be. Dry ingredients, however, should
not be processed longer than 1 minute.
• Pre-cut meat and other solid ingredients into
smaller pieces before putting them into the
blender jar.
• For optimal blending of solid ingredients, feed a
series of small amounts into the jar rather than
processing a large quantity at once.
• If the appliance is not blending fast enough,
switch it off and
- switch to pulse position M, or
- stir the ingredients with a spatula (not while
the blender is running!), or
- reduce the contents of the jar.
• To make tomato juice, quarter the tomatoes
and drop the pieces into the jar one by one
through the opening in the lid while the motor is
running.
Soy bean filter (extra)
With this filter you will make delicious fresh soy
milk or fruit juices in next to no time. All pips and
skins will remain behind in the filter.
Assembly
- Assemble the blender jar (see ‘Blender,
Assembly’).
- Put the filter in the blender jar (fig. 11). Make
sure that the grooves of the filter fit onto the
ribs of the blender jar.
- Put the lid in place and turn it to fix the filter
(fig. 12).
- Put the ingredients in the filter (fig. 13).
Note: The filter should never be filled beyond
its maximum (MAX) level indication!
- Add water.
- Switch the appliance on and select speed 2.
Let the appliance run for 40 seconds.
- Switch the appliance off. Remove the blender
jar and pour out the drink through the spout
(fig. 14).
- For optimal results, put the jar with the
remaining ingredients back onto the appliance
and let it run for a few more seconds.
- Pour out the rest of the drink.
Tips
- Do not process more than 50 g of dry soy beans
with max. 500 ml water at a time.
- Soak soy beans for 4 hours before processing
them.
- When you process fruits, you get the best result
when adding approximately 300 ml water to
500 g fruit.
Mill (only type 2839)
Assembly
- Put the ingredients in the beaker (fig. 15).
Note: Process only dry ingredients. Do not fill
the beaker above the “MAX” indication.
- Put the rubber ring around the edge of the
blade unit (fig. 16).
- Screw the blade unit onto the beaker (fig. 17).
This may require some effort at first. The blade
unit will be easier to fasten if you moisten the
rubber ring with a drop of water.
- The mill is now ready for use. Turn it upside
down and screw it onto the motor unit (fig. 18).
- Preferably use the pulse position M.
What to use the mill for?
The mill is suitable for grinding and chopping e.g.:
Ingredients Optimum quantities
(gram)
- dried spices 35 - 75
- peppercorns 25 - 75
- sesame seeds 50 - 100
- rice 75 - 125
- wheat 75 - 125
- soy beans 25 - 75
- white beans (haricots) 25 - 75
- dried peas 25 - 75
- coconut flesh 25 - 75
- coffee beans 25 - 75
- cheese 25 - 75
- dried bread one dried slice of bread
- sugar cubes 50
- nuts (shelled) 50 - 100
- dry masala 125 - 250
Never use the mill for crushing ice.
Cleaning
General
• Cleaning is easier immediately after use.
• Do not clean the appliance or its parts in the
dishwasher.
• The motor unit can be cleaned with a soft,
moist cloth. Never immerse the motor unit in
water! Do not use abrasives, scourers, alcohol
etc.
• Clean the parts that have come into contact
with food immediately after use.
Cleaning the blender
- Assemble the blender jar properly (see section
on assembly of the blender). Pour lukewarm
water and some washing-up liquid into the
blender jar. Assemble the lid and the stopper.
- Press the Quick Clean button for a few
moments to clean the jar quickly.
- Unplug the appliance.
- Remove the lid, the stopper, the blender jar
and the blade unit and rinse them with clean,
hot water.
- If you want to clean the blender more
thoroughly, remove the blade unit and clean all
parts separately.
Note: Be careful with the sharp edges of the
blade unit!
Cleaning the soy bean filter (extra)
- Take the filter out of the blender jar.
- Hold the filter over a waste bin and gently
shake out the contents of the filter.
- Rinse the filter under the tap.
Cleaning the mill
- Disassemble the mill directly after use and
wash the parts in water with some washing-up
liquid.
Important: The blade unit of the mill is spring-
loaded to enable under-the-edge cleaning
(fig. 19).
- After washing, rinse the parts with clean water
and dry them thoroughly. ;4222 002 30445
I
G
H
F
J
K
L
M
B
A
D
C
E
P
Q
N
O
1
2 3 4 5
19
6
1
2
8
1
2
9
10
15
17
13
11
12
16
18
14
7
Introdution
The appliance has been equipped with an automatic thermal cut-off system. This system will
automatically cut off the power supply to the appliance in case of overheating.
If your appliance suddenly stops running:
•Pull the mains plug out of the wall socket.
•Set the selector knob to position 0 to switch the aplliance off.
•Let the appliance cool down for 60 minutes.
•Put the mains plug in the wall socket.
•Switch the appliance on again.
Please contact your Philips dealer or authorised Philips service centre if the automatic
thermal cut-off system is activaed too often.
CAUTION: In order to avoid a hazardous situation, this appliance must never be connected
to a timer switch.
HR 2839
HR 2838
I
G
H
F
J
K
L
M
B
A
D
C
E
P
Q
N
O
1
2 3 4 5
19
6
1
2
8
1
2
9
10
15 17
13
11 12
16
18
14
7
2003/04
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A
B
C
O=
1=
2=
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
-
-
-
-
-
-
-
-
•
-
-
•
•
•
•
•
-
-
-
•
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
•
•
•
•
-
-
-
-
-
-
-
-
-
Product specificaties
| Merk: | Philips |
| Categorie: | Blender |
| Model: | HR2839 |
Heb je hulp nodig?
Als je hulp nodig hebt met Philips HR2839 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Blender Philips
23 November 2024
12 November 2024
12 November 2024
12 November 2024
12 November 2024
12 November 2024
6 September 2024
1 September 2024
17 April 2024
Handleiding Blender
- Blender Electrolux
- Blender Braun
- Blender Bosch
- Blender Panasonic
- Blender AEG
- Blender BEKO
- Blender Grundig
- Blender Inventum
- Blender Kenwood
- Blender Krups
- Blender Medion
- Blender Quigg
- Blender Siemens
- Blender Tefal
- Blender Unold
- Blender Adler
- Blender Afk
- Blender Akai
- Blender Alessi
- Blender Ambiano
- Blender Amica
- Blender Ariete
- Blender Bamix
- Blender Bartscher
- Blender Beem
- Blender Bellini
- Blender Beper
- Blender Bestron
- Blender Bifinett
- Blender Blaupunkt
- Blender Blendtec
- Blender Blokker
- Blender Bodum
- Blender Bomann
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Brandt
- Blender Breville
- Blender Buffalo
- Blender Bugatti
- Blender Domo
- Blender Domoclip
- Blender Dualit
- Blender Duronic
- Blender Efbe-schott
- Blender Emerio
- Blender Esge
- Blender Esperanza
- Blender Espressions
- Blender ETA
- Blender Eufy
- Blender Exquisit
- Blender Fagor
- Blender Farberware
- Blender Fritel
- Blender G3 Ferrari
- Blender Galanz
- Blender Gastroback
- Blender GE
- Blender George Foreman
- Blender Gorenje
- Blender Gourmetmaxx
- Blender Graef
- Blender H.Koenig
- Blender Haier
- Blender Hanseatic
- Blender Hendi
- Blender Hitachi
- Blender Homeland
- Blender Hotpoint
- Blender Hyundai
- Blender Innoliving
- Blender InstantPot
- Blender Kalorik
- Blender Kambrook
- Blender Kenmore
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Klarstein
- Blender Koenic
- Blender Koenig
- Blender Kogan
- Blender Konig
- Blender Korona
- Blender Lagrange
- Blender Laica
- Blender Livington
- Blender Livoo
- Blender Logik
- Blender Maestro
- Blender Magic Bullet
- Blender Magimix
- Blender Maxwell
- Blender Melissa
- Blender Mesko
- Blender Mia
- Blender Micromaxx
- Blender Midea
- Blender Moa
- Blender Montana
- Blender Morphy Richards
- Blender Moulinex
- Blender MPM
- Blender Nedis
- Blender Ninja
- Blender Nordmende
- Blender Nova
- Blender Novamatic
- Blender Novis
- Blender NutriBullet
- Blender Philco
- Blender Primo
- Blender Princess
- Blender Privileg
- Blender ProfiCook
- Blender Proline
- Blender Redmond
- Blender Renkforce
- Blender Ritter
- Blender Rommelsbacher
- Blender Rotel
- Blender Russell Hobbs
- Blender Sage
- Blender Salton
- Blender Santos
- Blender Sanyo
- Blender Saro
- Blender Saturn
- Blender Schneider
- Blender Sencor
- Blender Severin
- Blender Shark
- Blender Sharp
- Blender Silvercrest
- Blender Smeg
- Blender Sogo
- Blender Solac
- Blender Solis
- Blender Springlane
- Blender Steba
- Blender Studio
- Blender Sunbeam
- Blender SupportPlus
- Blender Swan
- Blender Taurus
- Blender Team
- Blender Telefunken
- Blender Tesco
- Blender Tevion
- Blender Thane
- Blender Thomas
- Blender Tomado
- Blender Tower
- Blender Trebs
- Blender Tristar
- Blender Turbotronic
- Blender Turmix
- Blender Ufesa
- Blender Vitamix
- Blender Vitek
- Blender Vivax
- Blender Waves
- Blender Weasy
- Blender Westinghouse
- Blender Wmf
- Blender Wolf
- Blender Xsquo
- Blender Zelmer
- Blender Jata
- Blender JML
- Blender Jocel
- Blender JTC
- Blender Juiceman
- Blender OK
- Blender Omega
- Blender OneConcept
- Blender Orion
- Blender Oster
- Blender Clas Ohlson
- Blender Arzum
- Blender Black And Decker
- Blender Camry
- Blender Caso
- Blender Clatronic
- Blender Concept
- Blender Continental Edison
- Blender Cuisinart
- Blender ECG
- Blender Elba
- Blender Gallet
- Blender Hamilton Beach
- Blender Heinner
- Blender Imetec
- Blender Izzy
- Blender Khind
- Blender Mellerware
- Blender OBH Nordica
- Blender Optimum
- Blender Orbegozo
- Blender Profilo
- Blender Scarlett
- Blender Sinbo
- Blender Trisa
- Blender Vox
- Blender Wilfa
- Blender Champion
- Blender Monoprice
- Blender Catler
- Blender Drew & Cole
- Blender Nutrichef
- Blender AYA
- Blender Bella
- Blender Costway
- Blender Danby
- Blender King
- Blender Nevir
- Blender Svan
- Blender Ardes
- Blender Eldom
- Blender Grunkel
- Blender Lümme
- Blender Premium
- Blender Coline
- Blender Haeger
- Blender Waring Commercial
- Blender Brentwood
- Blender Chefman
- Blender DCG
- Blender Witt
- Blender Royal Catering
- Blender Apuro
- Blender Day
- Blender Zephir
- Blender Lenoxx
- Blender Riviera And Bar
- Blender Cosori
- Blender Baby Brezza
- Blender G21
- Blender Aurora
- Blender BORK
- Blender Orava
- Blender Signature
- Blender Dash
- Blender Cecotec
- Blender Prixton
- Blender Flama
- Blender Nesco
- Blender RGV
- Blender Comelec
- Blender Dynamic
- Blender Bar Maid
- Blender Ursus Trotter
- Blender Noveen
- Blender CRUX
- Blender AENO
- Blender Nutri Ninja
- Blender Łucznik
- Blender Emeril Lagasse
- Blender PowerXL
- Blender Globe
- Blender Beautiful
- Blender Tribest
- Blender Usha
- Blender Vitinni
- Blender Zwilling
- Blender Sam Cook
- Blender Zeegma
- Blender WestBend
- Blender Just Perfecto
- Blender Focus Electrics
- Blender Petra Electric
- Blender AvaMix
- Blender Robot Coupe
- Blender Inno-Hit
- Blender Jarden
- Blender JIMMY
- Blender Semak
- Blender Create
- Blender Girmi
- Blender BioChef
- Blender Power Air Fryer XL
- Blender Luvele
- Blender Back To Basics
- Blender Proappliances
- Blender Electroline
- Blender Imarflex
- Blender Mystery
Nieuwste handleidingen voor Blender
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
25 November 2024