Sheffield PLA0375 Handleiding

Sheffield Blender PLA0375

Lees hieronder de 📖 handleiding in het Nederlandse voor Sheffield PLA0375 (5 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Instruction Manual
Model: PLA0375
Rocket Blender
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Carefully read this manual before using this appliance.
Ensure that you know how the appliance functions and how to operate it.
Maintain the appliance in accordance with the instructions to ensure that it functions properly.
Keep this manual with the appliance. If the appliance is to be used by a third party, this instruction
manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and proper accident
prevention measures must always be used.
No liability can be accepted for any damage caused by non-compliance with these instructions or
any other improper use or mishandling.
Do not use this appliance if it has been dropped or damaged in any way, or if the supply cord is
damaged.
PACKAGE CONTENTS
1 Motor Unit (Base) X
1 X Large Cup
1 X Small Cup
1 X Juicer Attachment
4 X M s with Coloured Comfort Rings ug
4 X Storage Lids and Shaker Tops
1 X Cross Blades
1 X Flat Blades
1 X Pusher
1 Instruction Manual X
Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other packaging
components. They may be potentially dangerous to children.
GENERAL AND ELECTRICAL SAFETY
When using electric appliances always observe safety regulations where applicable to reduce the
risk of fire, electric shock and personal injury.
Always check that the power supply corresponds to the voltage on the rating plate.
Supply Cord and Plug
Always unplug from mains supply when not in use. Do not abuse or damage the power cord. If the
supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
Supervision
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Water
Do not immerse appliance in water. Do not immerse any part of this appliance or
supply cord in water. Do not use with wet hands or use in damp situations.
Use and Environment
Do not use outdoors. Place the Base on a flat, level, stable surface. Do not let the cord hang over
the edge of any table or bench top. D not leave in direct sunlight as this may damage the plastico .
Do not continuously operate the blender for more than 30 seconds. After 30 seconds of continuous
use, switch off and allow the appliance to cool for 1 minute. This appliance is intended for
household domestic use only. Do not use this appliance for anything other than its intended use.
Injury Precaution
WARNING: Potential injury from misuse! Avoid contact with all moving parts. Switch off the
appliance and disconnect from supply before changing accessories or approaching parts that move
in use. Care shall be taken when handling the sharp cutting blades, emptying the bowl and during
cleaning. Always disconnect the blender from the supply if it is left unattended and before
assembling, disassembling or cleaning.
Double Insulation Safety
This appliance is double insulated for your protection.
Do not attempt to repair a double insulated appliance.
GENERAL AND ELECTRICAL SAFETY
continued
Damaged or Dropped
Always inspect your appliance before use. Check parts are correctly attached. Do not use this
appliance if it has been damaged, dropped, left outdoors or dropped in water. Return it to an
authorised service dealer for examination and repair
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction manual in a safe and
dry place.
DIAGRAM
1. Motor Unit (Base)
2. Large cup with Cross blade Assembly
3. Small cup with Flat blade Assembly
4 Blender jug, Lid & Extractor filter .
5. Mugs with Colored Comfort Rings X4
6. Storage Lids and Shaker Tops X4
7 Pusher .
OPERATION
Before First Use
Carefully unpack your appliance and remove any labels or stickers from appliance. Remove all
accessories (both blade assemblies, blender jug lid, mugs, colored comfort rings, small cup& filter, ,
large cup, and storage lids) and thoroughly wash them in warm, soapy water then rinse and dry
with a dry towel. Carefully wipe the exterior of the base if necessary. WARNING: Do not immerse
the appliance base in water or any other liquids.
Using the Blender with the Jug, Cups or Mugs
Place ingredients into the all cup large cup a party mug and screw the cross blade or sm , or on
flat blade until they are sealed tight . ly
If using the blender jug, screw on the blade assembly to the bottom of the jug before adding
your ingredients and then ensure that the lid is securely in place.
Connect th base to a suitable 220 -240V ~ 50Hz power outlet socket e
Place the jug/cup/mug on top of the base ensuring the 3 tabs of the jug/cup/mug aligned are
with the three slots on the top inner edge of the base.
To turn on, press down and gently turn the jug/cup/mug anti-clockwise until the tabs lock
under the lip of the base. Once locked in, the blender will run continuously.
To turn off, simply twist the jug/cup/mug back clockwise. Wait until the blades have
completely stopped before removing the jug/cup/mug from the base.
Remember to unplug the from the power outlet when it is not in use or is left unattended. unit
Unscrew the blade assembly from the cup/mug pour out the contents. If using the jug, to
empty contents before removing the blade assembly. its
Alternatively if you have prepared a beverage, you may screw on one of the coloured comfort
rings and drink directly from the cup/mug.
This product comes with two storage lids to cover the cup/mug and store any leftovers. It also
has o shaker tops to dispense ground , dry contents from the cup/mug. tw up
Important: This appliance is designed for short term operation only. Do not run continuously for
more than 30 seconds. After 30 seconds stop and rest for 1 minute to allow the appliance to cool.
Note: The first time this appliance is used there may be a small amount of smoke and odour. This
is normal and is due to the protective coating placed on the motor at manufacture to protect it
during shipping.
Caution: for liquid ingredients, ly fill the containers to ¾ of their maximum capacity. Overfilling on
the cups could result in spillage, causing burns and/or property/product damage.
Warning: when blending hot liquids, cover with a cloth or towel before unscrewing blade
assembly. Slowly unscrew the blade assembly to release any pressure that may have built up
during blending. This will help to prevent a burn/scald hazard.
Using the Juice Extractor
Screw the cross blade the bottom of the blender jug. onto
Insert the extractor filter down the centre of the blender j making sure to line the four slots ug
in the extractor filter up with the four ribs on the inside of the blender j . ug
Place the lid onto the blender j align either the straining pourer or regular pourer up to ug ing
the spout.
Make sure the lid is locked on it holds the extractor filter in place, then take out as the
removable clear plastic top from the lid of the blender jug.
Place the assembled blender jug on top of the base ensuring the 3 tabs of the jug are aligned
with the three slots on the top inner edge of the base.
Turn on by press down and gently turn the jug anti-clockwise until the tabs lock under ing ing
the lip of the base. Once locked in, the will run continuously. unit
Make sure your juic ingredients are sized to fit into the extractor filter and place the ing
ingredients down the centre of the extractor.
Push the ingredients down into the blade with the pusher.
To avoid jamming the blades, which can cause serious motor damage, make sure the is unit
running before adding any ingredients into the juice extractor.
The juice will accumulate in the jug on the outside of the extractor filter and the pulp will
collect on the inside of the extractor filter.
Pour the juice into a glass with the extractor filter jug still assembled. &
Remember to allow the motor to run continuously for more than 30 seconds. After 3not 0
seconds stop and have a short break to allow the appliance to cool.
When the filter full of pulp, stop the unit, pour out any juice in the jug, disassemble the is
filter from the jug and clean away the pulp. If required, reassemble and continue juicing.
BLADE SELECTION
The can be used for: Cross Blade
Chopping foods such as fruit & vegetables
Crushing Ice
Blending drinks like smoothies, cocktails and milkshakes
Mixing batters for pancakes and muffins
Grating cheeses and chocolate
Pureeing soups and baby food
Grinding Meats
The can be used for: Flat Blade
Grinding and Chopping harder ingredients such coffee beans and as nuts
Whipping foods like cream and butter


Product specificaties

Merk: Sheffield
Categorie: Blender
Model: PLA0375

Heb je hulp nodig?

Als je hulp nodig hebt met Sheffield PLA0375 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Sheffield

Handleiding Blender

Nieuwste handleidingen voor Blender