Monoprice Maker Ultimate 2 Handleiding

Monoprice 3D Printer Maker Ultimate 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Monoprice Maker Ultimate 2 (4 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Maker Ulti

Maker UltiMaker Ultimate 2 3D Print

mate 2 3D Print

mate 2 3D Printmate 2 3D Printer

er er

P/N 36045

Quick Start

Quick StartQuick Start Guide

Guide

Guide Guide

INTRODUCTION

INTRODUCTION INTRODUCTION

Thank you for purchasing this Maker Ultimate2 3D Printer! This printer uses the FFF (Fused

Filament Fabrication) method of printing. It features a metal frame, fully enclosed

structure, and heated build platform. It can print 1.75mm ABS, PLA, metal fill, wood fill, and

other filament types with melting points below 250°C. It has a 200 x 150 x 150 mm print

area and can print at speeds up to 150mm/sec. It can print from a computer using a USB

connection or from sliced gcode files stored on . It supports auto leveling, a microSD™ card

has a removable and a heated glass build plate.

CUSTOMER SERVIC

CUSTOMER SERVICCUSTOMER SERVICE

E E

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com

www.monoprice.comwww.monoprice.com support@monoprice.com

support@monoprice.com

support@monoprice.comsupport@monoprice.com or via email at . Check the website for

support times and links.

PACKAGE CONTENTS

PACKAGE CONTENTSPACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x 3D printer

1x 500g spool of PLA filament

1x Filament holder

1x 8GB microSD™ card

1x microSD™ card reader

1x Metal scraper

1x USB cable

1x Switch cable

1x Motor cable

1x Set of Allen keys

1x Roll yellow tape

1x Spanner

1x Stick of water washable glue

1x US power cord

1x UK power cord

1x EU power cord

5x User's manuals (English,

Deutsche, Español, Français,

Italiano)

MENU OPERATION

MENU OPERATION MENU OPERATION

 The to the right of the is used to manipulate the menu.

Control Knob

Control KnobControl Knob LCD Display

LCD Display

LCD DisplayLCD Display

 If on a menu or submenu, turn the counterclockwise to move the

Control Knob

Control KnobControl Knob

menu highlight up or to the left.

 If on a menu or submenu, turn the clockwise to move the menu

Control Knob

Control KnobControl Knob

highlight down or to the right.

 If on a menu or submenu, push the to enter the highlighted submenu

Control Knob

Control KnobControl Knob

or to select the highlighted entry for editing.

 If editing a value, turn the counterclockwise to decrease the value.

Control Knob

Control KnobControl Knob

 If editing a value, turn the clockwise to increase the value.

Control Knob

Control KnobControl Knob

 If editing a value, push the to save the displayed value and return to

Control Knob

Control KnobControl Knob

the previous menu or submenu.

GETTING STARTED

GETTING STARTEDGETTING STARTED

1. Open the box and remove the printer from the protective foam. Set it on a flat,

stable surface, then remove the plastic film.

2. Use a pair of scissors or side cutters to remove the zip tiers and silicon rubber

sheets on the Z-axis.

3. Use the included 2mm Allen wrench and the included spanner to remove the fixed

support on the Z-axis.

4. Remove the microSD™ card from the accessory box and insert it in the card slot to

the left of the display. Next, remove the included AC power cord, plug one end into

the AC power socket on the left side of the printer, then plug the other end into a

nearby AC power outlet.

Product specificaties

Merk:	Monoprice
Categorie:	3D Printer
Model:	Maker Ultimate 2
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	15000 g
Breedte:	380 mm
Diepte:	340 mm
Hoogte:	420 mm
Materiaal behuizing:	Aluminium, Glass
USB-poort:	Ja
Ethernet LAN:	Nee
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Kijkglas:	Ja
Vermogensverbruik (max):	200 W
Ondersteunt Windows:	Ja
AC-adapter, uitgangsspanning:	24 V
AC-adapter, uitgangsstroom:	10 A
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Breedte mondstuk:	0.4 mm
Printmateriaal:	ABS, Polyethylene terephthalate (PET), Polylactic acid (PLA), Thermoplastic Elastomer (TPE), Thermoplastic polyurethane (TPU), Wood fiber
Ondersteunde filamentdikte:	1.75 mm
Maximaal afdrukformaat:	200 x 150 x 150 mm
Laagdikte (min):	- mm
Laagdikte (max):	- mm
Maximale printplatformtemperatuur:	100 °C
Ondersteunde modelbestandsindelingen:	gcode, obj, stl
Verwarmd printplatform:	Ja
Maximale bewegingssnelheid:	150 mm/sec
Positioneringsnauwkeurigheid (X, Y):	0.011 mm
Positioneringsnauwkeurigheid (Z):	0.0025 mm