Creality K2 Plus Handleiding
Creality
3D Printer
K2 Plus
Lees hieronder de 📖 handleiding in het Nederlandse voor Creality K2 Plus (27 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/27
User nual
s 3D Printer
V 1.6_EN
K2 P s
Thank you for choosing Creality. For your convenience, please read through this User Manual before you sta and follow
the instructions provided carefully.
Creality is always ready to provide you with high-quality seices. If you encounter any issues or have any questions when
using our products, please use the contact information at the end of this manual to contact us. To fuher improve your
user experience, you can nd more about our devices via the following methods:
User manual: You can nd instructions and videos in the USB ash disk provided with the printer.
You can also visit our ocial website (https://www.creality.com) to nd information regarding software, hardware,
contact information, device instructions, device warranty information, and more.
1. You can upgrade the rmware directly through the device screen;
2. You can upgrade the rmware via the Creality Cloud OTA;
3. Please visit the ocial website https://www.creality.com, click on “Suppo → Download Center ” , select the corresponding
model to download the required rmware, (Or click on“Creality Cloud → Downloads → Firmware”) , after installation is complete,
you can use it.
To Our Dear Users
Firmware Upgrade
Product Operation and After-Sales Seice Information
1. You can log in to the Creality Ocial Wiki (https://wiki.creality.com) to explore more
detailed after-sales seice tutorials.
2. Or contact our after-sales seice center at +86 755 3396 5666, or send e-mail to
cs@creality.com.
Creality Wiki
NOTES
1. Do not use the printer in any way other than described herein in order to avoid personal inju or propey damage;
2. Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-venti-
lated, cool and dustless environment;
3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print
quality;
4. Please use recommended laments to avoid clogging of the extrusion head and causing damage to the machine;
5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet,
which accompanies the printer;
6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal inju;
7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable pas that could cause
crushing and cutting injuries to bodily pas;
8. Use the provided tools to clean the lament from the extruder in time taking advantage of the residual temperature
after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
9. Clean the printer frequently. Clean the printer body with a d cloth regularly after powering o the printer, wipe away
dust, bonded print lament and foreign objects on the guide rails;
10. Children under 10 years old should not use the printer without supeision, otherwise it may cause personal inju;
11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment
is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our
products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any
circumstance;
12. Tip: Do not plug in or unplug wires on a charged basis.
Product specificaties
| Merk: | Creality |
| Categorie: | 3D Printer |
| Model: | K2 Plus |
Heb je hulp nodig?
Als je hulp nodig hebt met Creality K2 Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding 3D Printer Creality
16 Januari 2025
16 Januari 2025
19 November 2024
19 November 2024
19 November 2024
19 November 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
Handleiding 3D Printer
- 3D Printer Anker
- 3D Printer BQ
- 3D Printer Dimension
- 3D Printer Gembird
- 3D Printer German RepRap
- 3D Printer GooVer
- 3D Printer Kodak
- 3D Printer MakerBot
- 3D Printer Polaroid
- 3D Printer PP3DP
- 3D Printer Renkforce
- 3D Printer Velleman
- 3D Printer Weistek
- 3D Printer Weller
- 3D Printer 3D Systems
- 3D Printer Exibel
- 3D Printer Monoprice
- 3D Printer Flashforge
- 3D Printer Wanhao
- 3D Printer XYZprinting
- 3D Printer Leap Frog
- 3D Printer Snapmaker
- 3D Printer Easy Threed
- 3D Printer Anycubic
- 3D Printer Creality3D
- 3D Printer Artillery
- 3D Printer Zortrax
- 3D Printer LulzBot
- 3D Printer SINDOH
- 3D Printer Wasp
- 3D Printer Raise3D
- 3D Printer Craftbot
Nieuwste handleidingen voor 3D Printer
11 December 2024
15 November 2024
29 Juli 2024
29 Juli 2024
29 Juli 2024
29 Juli 2024
18 Juni 2024
28 Mei 2024
28 Mei 2024
8 April 2024