Monoprice Delta Pro Handleiding

Monoprice 3D Printer Delta Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Monoprice Delta Pro (2 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Monoprice Delta Pro 3D Printer

Quick-start Guide

UNPACKING AND PRINTER SETUP

AUTO-LEVELING

LIMITED WARRANTIES AND LIMITATION OF LIABILITY

SAFETY NOTICE

REGULARTORY COMPLIANCE

TECHNICAL SUPPORT

FIRST PRINT

Perform the following steps to prepare the printer for use.

Remove the printer from its packaging and place it on a flat, stable surface

with plenty of ventilation and a nearby AC power outlet.

Attach the Effector and Control Arms.2.

Plug in and power on.3.

Monoprice is pleased to provide free, live, online technical support to assist you

with any questions you may have about installation, setup, troubleshooting, or

product recommendations. If you ever need assistance with your new product,

please come online to talk to one of our friendly and knowledgeable Tech

Support Associates. Technical support is available through the online chat

button on our website www.monoprice.com during regular business hours, 7

days a week. You can also get assistance through email by sending a message

to tech@monoprice.com

CAUTION: This FCC Part 15 radio device operates on a non-interference basis

with other devices operating at this frequency. Any changes or modification to

said product not expressly approved by Monoprice, including the use of non-ap-

proved antennas, could void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Notice for FCC

Radio Notice for FCC

Do not use this product near water, for example, in a wet basement or near

swimming pool or in an area where accidentenal contact with water or liquid

might occurs.

Avoid using this product during an electrical storm. There may be a remote

risk of electric shock from the surge casued by lightning.

The external power adapter or AC power cord is the equipment's disconnec-

tion device. The power outlet must be located nearby the equipment and its

access must be easy.

Use this product in a well ventilated area.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Monoprice warranties sometimes vary by product, and all product-specific warranties are found on

product ID pages and within Monoprice's website. Subject to this limitation, in general, Monoprice

warrants (a) cables for life, and (b) that all other products will be free from defects in workmanship and

material for one year following delivery date, with certain exceptions. You must review product ID

pages carefully for warranty information. After 30 days of delivery and during the warranty period,

Monoprice will, without cost to you, at Monoprice’s option, either (i) repair defective products; (ii)

furnish replacement products; or (iii) grant you credit equal to the defective products' net purchase

price. Defective conditions in the products caused by third parties, acts of God, defective installation,

other trades, abnormal use or stress, or other matters unrelated to Monoprice’s activities are specifi-

cally excluded from the coverage of this warranty. You also hereby agree to be bound by Monoprice's

return and replacement policies. THE SITE AND SERVICES AND ALL PRODUCTS ARE MADE

AVAILABLE TO YOU ON AN "AS IS" AND "AS AVAILABLE" BASIS, UNLESS OTHERWISE SPECI-

FIED IN WRITING. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND

ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESS OR IMPLIED. TO THE

FULL EXTENT PERMISSIBLE BY APPLICABLE LAW, MONOPRICE DISCLAIMS ALL WARRAN-

TIES EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY,

NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER REME-

DIES. THE REMEDIES DESCRIBED IN THIS SECTION 6 ARE YOUR ONLY REMEDIES FOR ANY

BREACH OF WARRANTY OR ANY OTHER CLAIM. MONOPRICE’S TOTAL LIABILITY ARISING

OUT OF THE SITE, SERVICES, PRODUCTS, OR THE USE OF THE PRODUCTS, WHETHER ON

WARRANTIES OR CLAIM OF NEGLIGENCE, OR OTHERWISE, SHALL NOT IN ANY CASE

EXCEED THE COST PAID FOR THE DEFECTIVE PRODUCT OR 50 DOLLARS, WHICHEVER IS

LESS, AND MONOPRICE SHALL NOT BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY

INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES.

Address

11701 6th Street

Rancho Cucamonga, CA 91730, USA

Customer Service

support@monoprice.com

tech@monoprice.com

Legal

legal@monoprice.com

Call Us

Tel: 877.271.2592 Fax: 909.989.0078

Confirm that the hotend is

at room temperature, and

that the target tempertature

is at 0C before proceeding

to step 2. Tapping the hotend

icon toggles between preheat-

ing and cooling down.

Remove the Auto-level

Sensor.

Install the Auto-level Sensor and connect the wire.2.

Tap the control icon and then

tap the leveling icon.

Run “Auto-leveling.”4.

Return to the main menu,

tap on the control icon, and

tap on the preheat icon.

Then tap “PLA Preheat.”

Return to the control menu,

tap on the filament icon

and then tap “Load.”

Place a sheet of copy paper

onto the Glass Print Bed, then

tap the middle crosshairs to

adjust the Z-offset.

Adjust the height of the nozzle

so that the paper rubs gently

against the nozzle.

Thread the filament as illustrated.

Increase the offset

Decrease the offset

Green Wire

from Effector

Wire Assembly

Auto-level

Sensor Wire

Fan faces forward.

Load the filament to a point

within the circle as indicated

above.

The Filament

Sensor may be

hung from its holder

when not in use.

Return to the main menu to

start a print.

Choose your file.5.

Start printing.6.

Tap the control icon for

advanced settings.

Product specificaties

Merk:	Monoprice
Categorie:	3D Printer
Model:	Delta Pro
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	12000 g
Breedte:	525 mm
Diepte:	525 mm
Hoogte:	940 mm
Touchscreen:	Ja
USB-poort:	Ja
Nauwkeurigheid:	0.05 mm
Kijkglas:	Ja
Vermogensverbruik (max):	220 W
Ondersteunt Windows:	Windows 10
AC-adapter, uitgangsspanning:	24 V
Printtechnologie:	Fused Filament Fabrication (FFF)
Wifi:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Breedte mondstuk:	0.4 mm
Printmateriaal:	ABS, Nylon, Polyethylene Terephthalate Glycol (PETG), Polylactic acid (PLA), Wood fiber
Ondersteunde filamentdikte:	1.75 mm
Maximaal afdrukformaat:	270 x 270 x 300 mm
Laagdikte (min):	0.05 mm
Laagdikte (max):	0.3 mm
Maximale extrudertiptemperatuur:	310 °C
Maximale printplatformtemperatuur:	100 °C
Ondersteunde modelbestandsindelingen:	gcode
Verwarmd printplatform:	Ja
3D-scanner:	Nee
Maximale bewegingssnelheid:	150 mm/sec