Makita EBH252U Handleiding

Makita Snijmachine EBH252U

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita EBH252U (28 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

EBH252U

EBH253U

EBH252L

EBH253L

Petrol Brushcutter

EBH252U

EBH253U

EBH252L

EBH253L

ORIGINAL INSTRUCTION MANUAL

Important:

Read this instruction manual carefully before putting the Petrol Brushcutter into operation and strictly observe

the safety regulations!

Preserve instruction manual carefully!

EBH252L

EBH253L

Thank you very much for purchasing the MAKITA Petrol Brushcutter. We are

pleased to recommend to you the MAKITA Petrol Brushcutter which is the

result of a long development programme and many years of knowledge and

experience.

Please read this booklet which refers in detail to the various points that will

demonstrate its outstanding performance. This will assist you to obtain the best

possible result from your MAKITA Petrol Brushcutter.

Table of Contents Page

Symbols .........................................................................2

Safety instructions .........................................................3

Technical data................................................................7

Designation of parts.......................................................9

Mounting of handle ......................................................10

Mounting of protector................................................... 11

Mounting of cutter blade or nylon cutting head............12

Before start of operation ..............................................13

Correct handling of machine........................................15

Points in operation and how to stop ............................15

Resharpening the cutting tool ......................................17

Servicing instructions...................................................19

Storage ........................................................................22

Take Particular care and attention!

Read instruction manual and follow

the warnings and safety precautions!

Forbidden!

No smoking!

No open ame!

Protective gloves must be worn!

Keep the area of operation clear of all

persons and pets!

Wear protective helmet, eye and ear

protection!

Engine-manual start

Top permissible tool speed

Emergency stop

ON/START

OFF/STOP

Flying object hazard!

Keep distance!

Kickback!

Fuel (Gasoline)

First Aid

You will note the following symbols when reading the instructions manual.

Wear sturdy boots with nonslip soles.

Steeltoed safety boots are recommended!

English

(Original instructions)

15 Meters

Diagrammatic gure

General Instructions

Read this instruction manual to become familiar with handling of the –

equipment. Users insufciently informed will risk danger to themselves as

well as others due to improper handling.

It is recommended only to lend the equipment to people who have proven to –

be experienced.

Always hand over the instruction manual.

First users should ask the dealer for basic instructions to familiarize oneself –

with the handling of brushcutters.

Children and young persons aged under 18 years must not be allowed to –

operate this equipment. Persons over the age of 16 years may however

use the device for the purpose of being trained while under supervision of a

qualied trainer.

Use with the utmost care and attention. –

Operate only if you are in good physical condition. Perform all work calmly –

and carefully. The user has to accept liability for others.

Never use this equipment after consumption of alcohol or drugs, or if feeling –

tired or ill.

National regulation can restrict the use of the machine. –

Intended use of the machine

This equipment is only intended for cutting grass, weeds, bushes, –

undergrowth. It should not be used for any other purpose such as edging or

hedge cutting as this may cause injury.

Personal protective equipment

The clothing worn should be functional and appropriate, i.e. it should be tight- –

tting but not cause hindrance. Do not wear either jewelry or clothing which

could become entangled with bushes or shrubs.

In order to avoid either head-, eye-, hand-or foot injuries as well as to protect –

your hearing the following protective equipment and protective clothing must

be used during operation.

Always wear a helmet where there is a risk of falling objects. The protective –

helmet (1) is to be checked at regular intervals for damage and is to be

replaced at the latest after 5 years. Use only approved protective helmets.

The visor (2) of the helmet (or alternatively goggles) protects the face from –

ying debris and stones. During operation always wear goggles, or a visor to

prevent eye injuries.

Wear adequate noise protection equipment to avoid hearing impairment (ear –

muffs (3), ear plugs etc.).

The work overalls (4) protect against ying stones and debris. –

We strongly recommend that the user wears work overalls.

Gloves (5) are part of the prescribed equipment and must always be worn –

during operation.

When using the equipment, always wear sturdy shoes (6) with a non-slip –

sole. This protects against injuries and ensures a good footing.

Starting up the brushcutter

Please make sure that there are no children or other people within a working –

range of 15 meters (50 ft), also pay attention to any animals in the working

vicinity.

Before use always check the equipment is safe for operation: –

Check the security of the cutting tool, the throttle lever for easy action and

check for proper functioning of the throttle lever lock.

Rotation of the cutting tool during idling speed is not allowed. Check with your –

dealer for adjustment if in doubt. Check for clean and dry handles and test

the function of the start/stop switch.

Product specificaties

Merk:	Makita
Categorie:	Snijmachine
Model:	EBH252U
Kleur van het product:	Black, Blue
Gewicht:	5700 g
Breedte:	620 mm
Diepte:	490 mm
Soort:	Draadtrimmer
Stroombron:	Benzine
Vermogen:	710 W
Lengte:	1770 mm
Draadloos:	Ja
Snijdiameter (max):	- mm
Motorvermogen:	1 hp
Type kop:	Lemmet
Capaciteit brandstoftank:	0.5 l
Cilinderinhoud:	24.5 cm³